| Author |
Topic: How would you? |
Jerry Horner
From:
Tahlequah, OK, USA
|
Posted 2 Jun 2002 3:01 pm |
|
12 String Tuning.
--------------------------------------------------------------------------------
Following is the tuning I have used on S12 for many years. It lends it'self not only to commercial pedal work but also to western swing, jazz,ect. I would like some comments though that if you were to start from scratch with this tuning, how would you hook up 5 floor and 3 knee levers.
F#-Ed-G#-E-C#-B-G#-E-C#-A-B-E
No telling what you guys might come up with.
Thanks,
Jerry |
|
|
|
Bobby Lee
From:
Cloverdale, California, USA
|
Posted 2 Jun 2002 9:12 pm
|
|
| Is your 11th string (B) a step higher than your 10th (A)? |
|
|
|
Jerry Horner
From:
Tahlequah, OK, USA
|
Posted 3 Jun 2002 12:44 am
|
|
BoB,
Yes it is one step higher.
Jerry |
|
|
|
Al Marcus
From:
Cedar Springs,MI USA (deceased)
|
Posted 3 Jun 2002 9:52 am
|
|
Hi Jerry- Nice tuning! I am glad to see players trying something other than standard tunings..I know why you put the A on 10 string instead of the 11th. So you can get straight Amajor7th and a root for your A tuning.
But I have found with the tuning I use which is "almost "exactly like yours, that the B will usually work better on the 10th string and the A on the 11th. I know you have to reach with your thumb for it that way but it is easy to do.
I Find another nice way to do that bottom , is to put a B on the 10th and G# on the 11th. can bevery versatile,( practically like an Ext.E9.) then pull the 11th up to A on a Pedal or Knee lever....al 
[This message was edited by Al Marcus on 03 June 2002 at 10:54 AM.] |
|
|
|
Al Marcus
From:
Cedar Springs,MI USA (deceased)
|
Posted 3 Jun 2002 10:01 am
|
|
As for 5 pedals an 3 knee levers. I will say, P1 raise B's to C#, P2 raise G#'s to A.
P3-4-5 same as P5-6-7 on C6th.
P3 flat the B's and raise the E12th to F#.
P4 flat the G# and raise the 3rd to A and the 11th to A.
P5 raise the 4th string E to F# and the 5th string C# do D# .
That would get your main E9 pedals and your Main 3, C6 type pedals, only in E6...al |
|
|
|
Jerry Horner
From:
Tahlequah, OK, USA
|
Posted 3 Jun 2002 1:42 pm
|
|
Thanks Al,
You have got me to thinking. I have had it one way for so long but have always though there were a few better ways to set it up. I guess we are all creatures of habit to some extent. You know, What was good enough for grampa should be good enough for me.
Thanks again,
Jerry |
|
|
|
