Author |
Topic: Footswitch for Peave Classic VTX |
Doug Earnest
From: Branson, MO USA
|
Posted 28 Apr 2005 10:04 am
|
|
I need a footswitch for the Peavey Classic VTX series amp. I believe they control the reverb, phase shifter, and channel selector.
Also have the amp for sale, $275. |
|
|
|
Doug Earnest
From: Branson, MO USA
|
Posted 29 Apr 2005 2:02 pm
|
|
bump |
|
|
|
Doug Earnest
From: Branson, MO USA
|
Posted 1 May 2005 7:54 am
|
|
another bump |
|
|
|
Jerry Hayes
From: Virginia Beach, Va.
|
Posted 4 May 2005 3:22 am
|
|
Hey Doug, I needed a footswitch for a Peavey MX amp which hasn't been manufactured for quite a while so I contacted Mike Brown at Peavey and he set it up with the service people and they put together a switch with the same connector plug from another amp and rewired it to the specs of the MX and even relabeled the buttons to do what I needed. It was very reasonable too. I'd contact ol' Mike as he'll take care of you...JH in Va.
------------------
Livin' in the Past and Future with a 12 string Mooney Universal tuning.
|
|
|
|
Ron !
|
Posted 4 May 2005 3:40 am
|
|
These switches are the same ones that came with the Peavey Ultra112 All Tube.
These amps are still available everywhere.A good music store should have such a switch lying around in the back somewhere.
Ron
------------------
Nikaro Steel Guitars
Nikaro SD10 4x6-Nikaro SD10 4x5-2Peavey 112 Ultra Tube.
nikarosteelguitars@planet.nl
European Steel Guitar Forum
|
|
|
|
Doug Earnest
From: Branson, MO USA
|
Posted 6 May 2005 5:24 pm
|
|
Thank you for the replies. I was hoping someone here might have one stuck back somewhere. Guess I'll call Mike. |
|
|
|
Jack Shrader Sr
From: Columbus In. U.S.A.
|
Posted 6 May 2005 7:54 pm
|
|
I just check and I have (2 ) foot switched
1 is a (2) button Rev and sel..
1 is a (3) button efx 1 efx 2 Rev..
the one with 2 button has a 1/4 in. plug
the on with 3 buttons has the round plug with the pins inside it has 7 pins it is
like the session 500 remote switch connector
Jack |
|
|
|