| Author |
Topic: Zum end plates question |
Gary Hamblin
From:
Callao, VA
|
Posted 12 Apr 2024 7:41 am |
|
I have a Zum that the top chrome trim is coming off.It was installed with double sided tape.What is the best way to put it back.Its still behind the end plates and I don't what to take them loose.
_________________
JCH/SD10 ,ZUM,D10 ,Rosewood Emmons Push Pull,T8 Fender Stringmaster.Nashville and Session 400,Walker Stereo Steel,Boss Katana 100 and John Hughey's Vegas 400.Hilton Pro Delay,Telonics Volume Pedal, Steelers Choice Seat,Live Steel Strings. |
|
|
|
Tony Rankin
From:
Land O’ Lakes, FL
|
Posted 13 Apr 2024 9:27 am
|
|
Contact cement works well for that task. I’ve done that before.
_________________
Tony Rankin |
|
|
|
Gary Hamblin
From:
Callao, VA
|
Posted 13 Apr 2024 10:28 am Zum
|
|
That's what I did.
_________________
JCH/SD10 ,ZUM,D10 ,Rosewood Emmons Push Pull,T8 Fender Stringmaster.Nashville and Session 400,Walker Stereo Steel,Boss Katana 100 and John Hughey's Vegas 400.Hilton Pro Delay,Telonics Volume Pedal, Steelers Choice Seat,Live Steel Strings. |
|
|
|
John Palumbo
From:
Lansdale, PA.
|
Posted 13 Apr 2024 1:45 pm
|
|
Can this fix be done leaving the end plates in place?
_________________
Mullen G2, Hilton VP, Roland Blues Cube Hot, Keeley Caverns V2 Delay & Reverb |
|
|
|
Gary Hamblin
From:
Callao, VA
|
Posted 13 Apr 2024 3:30 pm Zum
|
|
I did because I didn't want remove the end plates.
_________________
JCH/SD10 ,ZUM,D10 ,Rosewood Emmons Push Pull,T8 Fender Stringmaster.Nashville and Session 400,Walker Stereo Steel,Boss Katana 100 and John Hughey's Vegas 400.Hilton Pro Delay,Telonics Volume Pedal, Steelers Choice Seat,Live Steel Strings. |
|
|
|
Doug Earnest
From:
Branson, MO USA
|
Posted 14 Apr 2024 1:29 pm
|
|
Go to the auto parts store and get a tube of emblem trim adhesive. 3M is the popular brand. Work it into the gap of the loose trim a few times, work the trim back and forth a bit to try to get a good bit of adhesive in there.
Push the trim tight and secure with some blue or green painters tape. It shouldn't take long to set. Any excess glue, which should be very minimal, can be wiped off with naptha, paint thinner or similar product. Be careful of adhesive or solvents on pinstriping tape.
And if contact cement does the job, great. |
|
|
|
Gary Hamblin
From:
Callao, VA
|
Posted 14 Apr 2024 2:03 pm Zum
|
|
Thanks
_________________
JCH/SD10 ,ZUM,D10 ,Rosewood Emmons Push Pull,T8 Fender Stringmaster.Nashville and Session 400,Walker Stereo Steel,Boss Katana 100 and John Hughey's Vegas 400.Hilton Pro Delay,Telonics Volume Pedal, Steelers Choice Seat,Live Steel Strings. |
|
|
|
