Author |
Topic: Steel Guitar Work Stands from Six-Nine Design |
Ross Shafer
From: Petaluma, California
|
Posted 4 Mar 2024 11:12 am
|
|
Six-Nine Design, builder of Sierra Steel Guitars is happy to announce a new Steel Guitar work stand. Available for shipping now.
High quality plywood has gotten out of sight price wise so I've designed this version to use far less than the original Steel Guitar Forum version, I used to make.
This new version has the same adjustment range of the original. There's a few extra holes in the base parts to hold hex keys, screwdrivers and such.
Price is $125 with USPS ground shipping included to the lower 48. Alaska, Hawaii and outside the US will cost a bit more. $5.00 of each sale will go to the forum.
If you'd like to order one, please email or PM me. Be sure to include you email addy so I can send a paypal invoice and of course your shipping address so I can ship it to you.
![](https://bb.steelguitarforum.com/userpix2203/5723_IMG_1327_2.jpg)
Last edited by Ross Shafer on 19 Mar 2024 10:02 am; edited 3 times in total |
|
|
|
Tim Pillow
From: Arizona
|
Posted 4 Mar 2024 11:21 am
|
|
Let me know when they’re ready for sale. I’ll take one. |
|
|
|
Jim Reynolds
From: Franklin, Pa 16323
|
Posted 4 Mar 2024 4:32 pm
|
|
Me too. _________________ Zum U-12, Carter SDU-12, Zum Encore, Emmons S-10, Emmons D-10, Nashville 400, Two Peavey Nashville 112, Boss Katana 100, Ibanez DD700, Almost every Lesson Jeff Newman sold. Washburn Special Edition Guitar, Can never have enough, even at 80. 1963 Original Hofner Bass bought in Germany 1963, and a 1973 Framus Bass also bought in Germany 1974. |
|
|
|
Ross Shafer
From: Petaluma, California
|
Posted 5 Mar 2024 7:38 am
|
|
you're on the list Jim. Anyone who wants one of these please pm or email me. Be sure to include your email and shipping addys. |
|
|
|
Ross Shafer
From: Petaluma, California
|
Posted 19 Mar 2024 8:34 am
|
|
first shipment of stands are on their way, thanks to all who've ordered. |
|
|
|
DALE WHITENER
From: TRINITY,NC USA
|
Posted 19 Mar 2024 5:24 pm
|
|
PM sent |
|
|
|
Roger Rettig
From: Naples, FL
|
Posted 20 Mar 2024 4:58 am
|
|
Back when these were first introduced by b0b, I dismissed them saying: "I wouldn't dream of meddling underneath my guitar; why would I need one?'
Things have certainly changed! Miles from any 'techie', I've been obliged to 'meddle'.
I am delighted to see Ross' announcement; fingers-crossed that I'm in the first outgoing shipment. It'll be a boon to be able to pluck a string and test a pull without tipping the steel to one side, precariously gripping a leg with one hand! _________________ Roger Rettig - Emmons D10s, Quilter TT-12, B-bender Teles and old Martins.
---------------------------------- |
|
|
|
Bob Shilling
From: Berkeley, CA, USA
|
Posted 21 Mar 2024 12:03 pm
|
|
Quote: |
It'll be a boon to be able to pluck a string and test a pull without tipping the steel to one side, precariously gripping a leg with one hand! |
Mine just arrived and, after 5 or 10 minutes of assembly, it's just what I need. ![Very Happy](images/smiles/icon_biggrin.gif) _________________ Bob Shilling, Berkeley, CA--MSA S10, "Classic" |
|
|
|
Jon Light
From: Saugerties, NY
|
Posted 21 Mar 2024 12:30 pm
|
|
Anybody who works on their steels, either in the case or on a towel on the table -- the ability to reach under the guitar on a cradle such as this and pick a string is a game changer.
"I'll just make this adjustment and then I'll pick up the guitar and flip it over and set it on its feet and I'll see if the adjustment is right....."
As Bill Monroe said, "that ain't no part of nothin' " |
|
|
|
Roger Rettig
From: Naples, FL
|
Posted 21 Mar 2024 1:11 pm
|
|
It's been a towel-on-the-table for me. Lifting the D10 that extra few inches into its case would be a 'bridge too far' for this cowboy.
I have been allocated a bath-towel that's now blemished with oily marks. I say it's to protect my Emmons; Susie insists its for the well-being of the dining room table.
As the workbench is coming from CA to FL, I don't think mine arrives until the 27th! Bad news - - my 'new' Zum Universal gets here tomorrow. That bench will be pressed into service immediately!
![](https://bb.steelguitarforum.com/userpix2203/2037_Zum_12_1.jpg) _________________ Roger Rettig - Emmons D10s, Quilter TT-12, B-bender Teles and old Martins.
---------------------------------- |
|
|
|
Ross Shafer
From: Petaluma, California
|
Posted 25 Mar 2024 11:16 am
|
|
here's a "blown up" diagram of the stand. This should help with any questions regarding assembly. I've printed a bunch of them out and will include one with each stand.
![](https://bb.steelguitarforum.com/userpix2203/5723_69_workstand_instructions_ass_1.jpg) |
|
|
|
Roger Rettig
From: Naples, FL
|
Posted 27 Mar 2024 12:07 pm
|
|
This is frustrating!
UPS say it's been delivered but it hasn't - or not to us, anyway.
![Sad](images/smiles/icon_sad.gif) _________________ Roger Rettig - Emmons D10s, Quilter TT-12, B-bender Teles and old Martins.
---------------------------------- |
|
|
|
Ross Shafer
From: Petaluma, California
|
Posted 27 Mar 2024 2:22 pm
|
|
Glad the mystery got solved Roger...special thanks to your good neighbor for finishing the job for UPS! |
|
|
|
Roger Rettig
From: Naples, FL
|
Posted 27 Mar 2024 2:23 pm
|
|
Exactly!!!
Nice chatting with you; putting it together now!
![Smile](images/smiles/icon_smile.gif) _________________ Roger Rettig - Emmons D10s, Quilter TT-12, B-bender Teles and old Martins.
---------------------------------- |
|
|
|
Bo Borland
From: South Jersey -
|
Posted 28 Mar 2024 6:40 am
|
|
I bought one from b0b a few years ago. It’s great |
|
|
|
Ross Shafer
From: Petaluma, California
|
Posted 29 Mar 2024 8:30 am
|
|
Thanks Bo,
Glad it's working for you!
FYI to all you forum folk. I've just completed a large batch of these and can now ship quickly. |
|
|
|
M. Michael Murray
From: United Kingdom
|
Posted 5 Apr 2024 4:59 am
|
|
I got mine! It's a fantastic product and Ross delivers a brilliant service.
Shiipped UPS Express on Wednesday, delivered Friday morning to Glasgow, Scotland.
I'm stoked! |
|
|
|
Ross Shafer
From: Petaluma, California
|
Posted 5 Apr 2024 9:05 am
|
|
That was amazeballs fast shipping! Yay UPS! Thanks again for your purchase Michael! |
|
|
|
Ross Shafer
From: Petaluma, California
|
Posted 5 Apr 2024 9:14 am
|
|
That was amazeballs fast shipping! Yay UPS! Thanks again for your purchase Michael! |
|
|
|
Tim Pillow
From: Arizona
|
Posted 10 Apr 2024 8:18 pm
|
|
I got to say this is the best tool on the market. Small light adjustable and very well thought out. sit right on my computer desk, flip up ans set the guitar right down on it, perfect height, access to the strings, keyhead and back of the changer. It has paid itself off. Glad I bought one. |
|
|
|
Tom Jordan
From: Wichita, KS
|
Posted 11 Apr 2024 7:29 pm
|
|
Thank you Ross, great packing and quick shipping. The stand is very high quality and I loke forward to using it.
Tom _________________ Dekley S10, Nashville Tele w/Parson B Bender, Dobros, Lap Steels
Fender Tube Amps, Evans FET 500, and stuff... |
|
|
|
Ross Shafer
From: Petaluma, California
|
Posted 12 Apr 2024 8:15 am
|
|
Thanks for letting me know you got your stands guys....hope they help you in keeping your steels in tip top shape! |
|
|
|
Chris Templeton
From: The Green Mountain State
|
|
|
|