| Author |
Topic: Troubleshoot Beard Cone Biscuit style |
John Mulligan
From:
Ontario, Canada
|
Posted 3 Oct 2022 9:14 am |
|
Hi; I have a Goldtone resonator, steel body, round neck, and biscuit bridge. I took it apart and cleaned it, then put it back together. Now the cone is making a booming sound when I play it. Any comments would be helpful.
The cone has a dent near the top, I don't know if it has always been there or not. I never had the cone out before this. I can't get the cone to sit properly. It was fine before I took it apart. Does the cone need to be replaced?
Any suggestions, comments, or follow-up questions are welcome.
Thanks! |
|
|
|
Howard Parker
From:
Maryland
|
Posted 3 Oct 2022 9:16 am
|
|
Pictures would help, the cone in and out.
Also, make sure that you don't have the biscuit reversed(rotated) (high side/low side).
h
_________________
Howard Parker
03\' Carter D-10
70\'s Dekley D-10
52\' Fender Custom
Many guitars by Paul Beard
Listowner Resoguit-L |
|
|
|
John Mulligan
From:
Ontario, Canada
|
Posted 3 Oct 2022 9:26 am
|
|
 |
|
|
|
John Mulligan
From:
Ontario, Canada
|
Posted 3 Oct 2022 9:59 am
|
|
| I don't have a pic of the cone in place. I should have taken one. It's been reassembled now, so I can't take a pic of it in place. |
|
|
|
John Mulligan
From:
Ontario, Canada
|
Posted 3 Oct 2022 10:38 am
|
|
| For reference, I have had the cone out of my cheap Rogue resonator twice in the last three days and re-assembled it without issues. Plays fine. |
|
|
|
Howard Parker
From:
Maryland
|
Posted 3 Oct 2022 11:10 am
|
|
Oh my.
What pickup is that and did it come from Gold Tone that way?
Whatever any other issue is, the cone needs to be replaced. It might well be the issue. The cone could be slightly "cocked" to one side. There's not much that can go wrong with the cone shelf as it is steel.
I can't think of anything but the cone I'm afraid.
h |
|
|
|
John Mulligan
From:
Ontario, Canada
|
Posted 3 Oct 2022 12:00 pm
|
|
Is the dent significant, do you think? If the cone is cocked I can't imagine how it got that way, I was very careful with it and it worked just fine before I took it out. I had trouble getting it seated, but I didn't force it.
Yes, the pickup came that way. At some point it stopped working. I let it go for a long time then decided I would look at it to see what is wrong with it. I couldn't see anything wrong.
Thank you for your helpful response. |
|
|
|
Howard Parker
From:
Maryland
|
Posted 3 Oct 2022 12:06 pm
|
|
John,
Near Toronto?
The folks at 12th Fret know these guitars and could do an "in person" evaluation for you.
h |
|
|
|
John Mulligan
From:
Ontario, Canada
|
Posted 3 Oct 2022 12:16 pm
|
|
Right. Thanks for your help. I respect your opinion. I may contact them.
All the best! |
|
|
|
Allan Revich
From:
Victoria, BC
|
Posted 3 Oct 2022 12:39 pm
|
|
I’d start by taking it apart again.
Make sure the biscuit, bridge, cone connection is snug.
Make sure the cone is aligned nice and evenly.
Watch the cover alignment as you reassemble it.
Is the tailpiece slapping against the cover?
Is the cover banging against the guitar body?
And if nothing else works, 12th Fret know resonator guitars as well as just about anyone.
_________________
Current Tunings:
6 String | G – D G D G B D
7 String | G9 – D G B D F A D
https://papadafoe.com/lap-steel-tuning-database |
|
|
|
John Mulligan
From:
Ontario, Canada
|
Posted 4 Oct 2022 8:37 am
|
|
| Thanks. I have done this twice, but I think I'll have to do it again, in a much more detailed and repeatable way. |
|
|
|
Joe Burke
From:
Toronto, Canada
|
Posted 4 Oct 2022 10:08 am
|
|
| Another vote for the 12th fret. They are good! |
|
|
|
