| Author |
Topic: White noise in Quilter Steelaire Rackmount |
Roger Crawford
From:
Griffin, GA USA
|
Posted 5 Aug 2022 6:16 am |
|
| All of a sudden, there is white noise when there is an effects pedal used. Happens when the pedal is in line after the volume pedal or in the effects loop. I’ve checked with different cables in all locations and with a different volume pedal. It’s quiet as a church mouse with no effects pedal. Any ideas on what’s happening? |
|
|
|
Larry Dering
From:
Missouri, USA
|
Posted 5 Aug 2022 6:52 am
|
|
| Roger, I suppose you also tried a different power supply? I had a pedal with that issue and when on battery it was fine. Otherwise I'm thinking impedance mismatch, unless this pedal was used previously with no issues. |
|
|
|
Mike Auman
From:
North Texas, USA
|
Posted 5 Aug 2022 11:51 am
|
|
Roger, what's the brand and model of the FX pedal? And is it noisy when the pedal is active, bypassed, or both?
_________________
Long-time guitar player, now wrestling with lap steel. |
|
|
|
Roger Crawford
From:
Griffin, GA USA
|
Posted 6 Aug 2022 5:22 am
|
|
| The noise is with any effects pedal, NUX Atlantic, Zoom MS50G or Ibanez delay. I was powering from the 9 volt out on the back of the Quilter, but it’s the same if I run on batteries. The noise is there when the pedals are active and in bypass, but more prevalent when active. |
|
|
|
Larry Dering
From:
Missouri, USA
|
Posted 6 Aug 2022 5:43 am
|
|
| Roger, I can honestly say my quilter micropro combo doesn't do that. Sounds like an amp problem. Reach out quilter for advice on repair. |
|
|
|
Mike Auman
From:
North Texas, USA
|
Posted 6 Aug 2022 5:55 am
|
|
I agree with Larry. Swap out all your cables first, but then consider a problem with the amp.
_________________
Long-time guitar player, now wrestling with lap steel. |
|
|
|
Roger Crawford
From:
Griffin, GA USA
|
Posted 6 Aug 2022 6:27 am
|
|
| I’ve swapped out everything that can be swapped. I just sent a note to Quilter, hope they can advise without having to send it back for a repair. |
|
|
|
George Seymour
From:
Notown, Vermont, USA
|
Posted 8 Aug 2022 3:20 am
|
|
It's why I sold mine early on..at least that's what I could hear on the first ones..didn't even try the effect loop
_________________
Old Emmons D-10's & Wrap Resound 65, Standel amps!
Old Gibson Mastertones |
|
|
|
Roger Crawford
From:
Griffin, GA USA
|
Posted 11 Aug 2022 2:24 pm
|
|
| Problem solved! Cleaned all of the jacks with contact cleaner and it’s good to go. I reached out to Quilter and Pat was very quick to respond. Very good customer service. |
|
|
|
Larry Dering
From:
Missouri, USA
|
Posted 11 Aug 2022 5:51 pm
|
|
| Roger that's great news. Glad it was a simple fix. |
|
|
|
