| Author |
Topic: custom steel seats |
Jeff Buesing
From:
Minnesota, USA
|
Posted 3 Jul 2022 7:39 am |
|
| I'm 6'4, with long legs. All of my steels are set high, but I would like to find a pack-a-seat that was higher than normal, while still having foldable legs. Any ideas? Thanks. |
|
|
|
Roger Crawford
From:
Griffin, GA USA
|
|
|
|
Ron Funk
From:
Ballwin, Missouri
|
Posted 3 Jul 2022 7:33 pm
|
|
Jeff -
You might try removing the existing foldable legs and then installing additional plywood 'height' onto the bottom of your seat.
Then reinstall the original folding legs onto the additional plywood 'height.'
Might work - might not!
Ron |
|
|
|
Bobby D. Jones
From:
West Virginia, USA
|
Posted 4 Jul 2022 7:33 pm
|
|
| If you have a seat with the U shaped aluminum tubing bent legs, Check with local electric contractors, They may have a conduit bender and could make you a custom set of legs. |
|
|
|
Ron Pruter
From:
Arizona, USA
|
Posted 6 Jul 2022 10:47 am
|
|
I'm thinking maybe, the contractor bends might not be tight enough. Just a thought. RP
_________________
Emmons SKH Le Grande, '73 Fender P/J bass, Tick tack bass, Regal high strung, USA Nashville 112. |
|
|
|
Dan Rollans
From:
Little Rock, Arkansas, USA
|
Posted 6 Jul 2022 8:55 pm Steelers Choice
|
|
Hello Jeff, I sent you a response to your email to Steelers Choice concerning this topic.
The answer is Yes. I can build you a seat to your specifications. Custom specific heights are not a problem. Please feel free to call me at 501-912-6526. Seven days a week. 9-9 central time.
Thank you, Dan Rollans @Steelers Choice |
|
|
|
Dick Hitchcock
From:
Wayne, Nebraska
|
Posted 7 Jul 2022 6:14 am
|
|
Jeff, Joe Naylor sent me 4 leg extensions from Steel Seat.....Worked for me.
https://www.facebook.com/steelseat/
_________________
Justice Pro Lite 4x5.... NV112.... Steel seat. |
|
|
|
Jon Jaffe
From:
Austin, Texas
|
Posted 9 Jul 2022 12:55 pm Custom Legs
|
|
I solved the problem easily. I am short, but I prefer my seat higher in the back than the front. I assume that your seat has plastic glides in the aluminum tubes. Like this:
They are replaceable as threaded inserts like this:
The feet come in numerous heights like this:
and this:
All for under $25 bucks, from Amazon. Search: "adjustable chair feet". The only tools you need are a hammer to pound the inserts in and pliers to take the old ones out.
You will have the satisfaction of doing it yourself and customizing it to your height. |
|
|
|
Roger Andrusky
From:
Waterford, PA, USA
|
Posted 26 Jul 2022 3:56 pm
|
|
| I'm 6'2" and have the same problem. I have tried to raise my MSA high enough to clear my knees but the front leg height rests on the pedal board and no matter what I try I can't keep them tight enough if I extend the legs or keep them the same height. I compromise by tilting the back of the guitar slightly higher than the front, but I would like it to be level. I can probably put spacers on the front legs, but just haven't made the time to try it. |
|
|
|
Roy Carroll
From:
North of a Round Rock
|
Posted 28 Jul 2022 7:20 am
|
|
Jon Jaffe is correct, that is the best way to make the height better and still maintain the integrity of the seat.
Adjustable is way better. 
_________________
Just north of the Weird place, south of Georgetown |
|
|
|
