Peavey Profex 2

winston · From: Frankfort, Kentucky 40601

The input volume pot shaft got broke on my Profex 2 and I need to replace it. Does anyone know where I can find a new pot or a used one that will work. I had a pot but apparently something was different as now all the gain is on the front end, you can barely turn it on so I would like to have the right one for it. thanks winston may

Ken Fox · From: Nashville GA USA

They have that pot in stock at Antique Electronics

winston · From: Frankfort, Kentucky 40601

Thank you Ken, I appreciate the info. winston may

Ken Fox · From: Nashville GA USA

https://www.tubesandmore.com/products/potentiometer-peavey-linear-mini-bracket

10k linear

Ken Fox · From: Nashville GA USA

Unless you have good de-soldering skills and equipment this pot is extremely difficult to remove. Board, traces and small solder pads can be damaged easily

Same pot used on the Nashville 112. Done a bunch of them

Forum Index > Electronics		Next oldest topic :: Next newest topic

All times are GMT - 8 Hours	Jump to: