| Author |
Topic: SOLD: Original TUNERS for Rickenbacker A-22 A-25 Guitar |
Jim Dulfer
From:
Southeastern USA
|
Posted 1 Nov 2021 6:47 am |
|
I have an set of original tuners (Waverly?) that can be found on 1930's era Rickenbacker A-22 and A-25 fry pan lap steels and National Style O and Duolians among several other guitars from that era. Suffice to say, these near 90 year old tuners are extremely difficult to find especially still in good condition and with their ORIGINAL ivoroid buttons. Not cheap but good luck finding another set. $325 + shipping.
Last edited by Jim Dulfer on 15 Dec 2021 4:49 am; edited 1 time in total |
|
|
|
Jim Dulfer
From:
Southeastern USA
|
Posted 8 Nov 2021 1:04 pm
|
|
TTT please. Timing is everything.  |
|
|
|
Jim Dulfer
From:
Southeastern USA
|
Posted 20 Nov 2021 7:03 am
|
|
| Good luck finding this rare set of tuners when you might need them. I also have quite a few other sets of vintage and rare tuners (Grover, Kluson & Waverly) so email me if you're looking for something specific. |
|
|
|
Hiro Keitora
From:
New York, New York
|
Posted 24 Nov 2021 8:25 pm
|
|
What is the diameter of the posts?
New Waverly posts are 6mm(0.237â€) and that’s just enough doesn’t fit -
5.57+\- mm or 7/32†should work-
What do you have? |
|
|
|
Jim Dulfer
From:
Southeastern USA
|
Posted 25 Nov 2021 5:23 am
|
|
These tuners are old and original to the 1930's so here is a pic with a caliper Is this what you're asking?
 |
|
|
|
Hiro Keitora
From:
New York, New York
|
Posted 25 Nov 2021 8:27 am
|
|
| That should fit ! Only other concern about mounting it on A-22 aluminum headstock, is that, it’s mounted with “ machine screws†with slightly larger diameter than wood screws used on wood slotted headstock. I think A-22 came with plain rectangular plate, but this should work I think- |
|
|
|
Jim Dulfer
From:
Southeastern USA
|
Posted 28 Nov 2021 5:19 am
|
|
| Hiro Keitora wrote: |
| That should fit ! Only other concern about mounting it on A-22 aluminum headstock, is that, it’s mounted with “ machine screws†with slightly larger diameter than wood screws used on wood slotted headstock. I think A-22 came with plain rectangular plate, but this should work I think- |
I sent you an email and a PM a few days ago. Did you receive either? |
|
|
|
Jim Dulfer
From:
Southeastern USA
|
Posted 12 Dec 2021 10:26 am
|
|
| Tuners still available but, considering they are about 80 years old, I'm surprised. So TTT it is. |
|
|
|
