Author |
Topic: The Candy Cane Bell Crank |
Chris Templeton
From: The Green Mountain State
|
Posted 13 Sep 2021 3:23 pm
|
|
I spoke with Ross Shafer at Sierra Steel Guitars about my design called "The Candy cane bell crank", because I designed it from a Sierra bell crank.
Here's a drawing I made 20 or so years ago and an explanation.
Please PM me if you would like to use this idea, maybe adapted to a different bell crank:
_________________ Excel 3/4 Pedal With An 8 String Hawaiian Neck, Tapper (10 string with a raised fretboard to fret with fingers), Single neck Fessenden 3/5
"The Tapper" : https://christophertempleton.bandcamp.com/album/the-tapper
Soundcloud Playlist: https://soundcloud.com/bluespruce8: |
|
|
|
John Hyland
From: South Australia
|
Posted 16 Sep 2021 4:51 pm
|
|
Interesting idea but to return the rod to the upper position might not be so easy. Maybe? |
|
|
|
Chris Templeton
From: The Green Mountain State
|
|
|
|
John Hyland
From: South Australia
|
Posted 16 Sep 2021 5:46 pm
|
|
I can see a push forward and the rod drops under gravity. But getting it back requires finding the right rod and pushing up along with the bellcrack at the same time |
|
|
|
b0b
From: Cloverdale, CA, USA
|
Posted 16 Sep 2021 9:48 pm Re: The Candy Cane Bell Crank
|
|
Chris Templeton wrote: |
I spoke with Ross Shafer at Sierra Steel Guitars about my design called "The Candy cane bell crank", because I designed it from a Sierra bell crank. |
It's an interesting idea but Ross Shafer's Sierra bell cranks don't have slots! I just back out the tuning nut with a few quick turns. Not as fast as your invention, but it works. _________________ -𝕓𝕆𝕓- (admin) - Robert P. Lee - Recordings - Breathe - D6th - Video |
|
|
|