The Steel Guitar Forum Store 

Post new topic PreSonus FaderPort 8?
Reply to topic
Author Topic:  PreSonus FaderPort 8?
b0b


From:
Cloverdale, CA, USA
Post  Posted 30 Mar 2021 10:59 pm    
Reply with quote

I'm gearing up to record local bands with an iMac. I've ordered a PreSonus 2626 interface to handle the microphones. Looking at the PreSonus FaderPort 8 because I like real faders. Does anyone here use it?

https://www.presonus.com/products/FaderPort-8

Studio One seems to be a good DAW. I notice that some of you use it. I figure integration would be seamless if I use all PreSonus hardware. Comments?
_________________
-š¯•“š¯•†š¯•“- (admin) - Robert P. Lee - Recordings - Breathe - D6th - Video
View user's profile Send private message Visit poster's website

Tony Prior


From:
Charlotte NC
Post  Posted 31 Mar 2021 12:11 am    
Reply with quote

Bob, I have the Presonus SINGLE Fader Port unit, the first issue. While of course the 8 Port unit would be nice for tracking a number of instruments at the same time, the single port is very flexible, it can move between tracks easily and recalls all previous settings.

The real benefit to these Presonus units is they are compatible with all DAWS, they communicate with Mackie and HUI control . Just shy of plug and play.
_________________
Emmons L-II , Fender Telecasters, B-Benders
Pro Tools 12 on WIN 7 !
jobless- but not homeless- now retired 9 years

CURRENT MUSIC TRACKS AT > https://tprior2241.wixsite.com/website
View user's profile Send private message Send e-mail Visit poster's website

Jack Stoner


From:
Kansas City, MO
Post  Posted 31 Mar 2021 2:06 am    
Reply with quote

Good luck with the Presonus hardware. EVERY new (not used) Presonus recording interface I tried had a hardware problem from new. I tried several including the last one about 4 years ago after I bought Studio One 4. Latency was poor too.
_________________
GFI Ultra Keyless S-10 with pad (Black of course) TB202 amp, Hilton VP, Steelers Choice sidekick seat, SIT Strings
Cakewalk by Bandlab and Studio One V4.6 pro DAWs, MOTU Ultralite MK5 recording interface unit
View user's profile Send private message Send e-mail

Bill Terry


From:
Bastrop, TX
Post  Posted 31 Mar 2021 7:01 am    
Reply with quote

I'm using the original FaderPort Tony mentioned (the single fader one) with Studio One on an old Mac Pro running High Sierra, pretty much plug and play, no issues.

I actually find the transport, record enable controls, etc. more useful than the fader (I can park that small controller right by the 'steel guitar position'), but it all works just fine.
_________________
Lost Pines Studio
"I'm nuts about bolts"
View user's profile Send private message Send e-mail

ajm

 

From:
Los Angeles
Post  Posted 31 Mar 2021 7:30 am    
Reply with quote

Disclaimer: I know very little about the new fangled computer DAW based recording stuff. (Tascam 788 lover here)

That said, just to be clear regarding a previous post by someone, and correct me if I'm wrong............

The Fader Port 8 is a DAW CONTROLLER, and is NOT an audio interface.
Therefore, latency should NOT be an issue with regards to the Fader Port 8.
If that post really intended on addressing the quality/reliability, that's another issue.

Per Bob's initial post, the Presonus Quantum 2626 is an 8 channel interface.
If there are any latency issues, THIS is where they should show up, NOT with the Fader Port 8.

Like I said, correct me if I'm wrong.


Last edited by ajm on 21 Apr 2021 7:34 am; edited 1 time in total
View user's profile Send private message

Dale Rottacker


From:
Walla Walla Washington, USA
Post  Posted 31 Mar 2021 7:35 am    
Reply with quote

b0b, I don't have the need for the 8 channel FaderPort, but do have the new Single Channel FaderPort... It's very handy sitting right beside me at the steel instead of reaching over the guitar for the keyboard all the time... I use mine with Studio One and an 1824c Interface. I think you'll love it, and lots of YouTube videos to help you get everything you can out of it.
_________________
Dale Rottacker, Steelinatuneā„¢
*2021 MSA Legend, "Jolly Rancher" D10 10x9
*2021 Rittenberry, "The Concord" D10 9x9
*1977 Blue Sho-Bud Pro 3 Custom 8x6
https://msapedalsteels.com
http://rittenberrysteelguitars.com
https://www.telonics.com/index.php
https://www.p2pamps.com
https://www.quilterlabs.com
View user's profile Send private message Send e-mail Visit poster's website

Tim Kowalski


From:
Illinois, USA
Post  Posted 31 Mar 2021 7:37 am    
Reply with quote

Hi bOb
I chose the Behringer X-Touch over the Faderport 8 because it has many programmable hot keys. It really speeds up workflow for me. I haven't had any issues with it using Reaper. The Sweetwater site has instructions to set it up with Studio One.

I love the motorized faders. It can also be expanded to 16 channels with the extension unit.

I'm sure that the FP-8 is a very good unit. I have one of the original single Faderport units and it has served me well for a very long time.
_________________
Bad wine is better than no wine.
View user's profile Send private message Send e-mail

Rick Campbell


From:
Sneedville, TN, USA
Post  Posted 31 Mar 2021 7:39 am    
Reply with quote

I've had Faderport 8, and also Faderport 16. NOW, I'm back to single Faderport. I found that mixing in Studio One with the memory mix is just as easy, or even easier, just using the mouse or single Faderport. The transport buttons on the Faderport get plenty of use.

bOb, For live mixing the Faderport 8 should do well.

I've owned a lot of Presonus equipment and had zero problems, except for when I plugged the wrong power supply into an interface and fried it. I called Presonus and told them what I'd done. They said not to worry about it and they fixed it for free. Even paid the return shipping.

See the song "You're Still On My Mind" here in another recent thread. It was recorded in Studio One with Presonus equipment.

RC
View user's profile Send private message Send e-mail

Jack Stoner


From:
Kansas City, MO
Post  Posted 31 Mar 2021 1:39 pm    
Reply with quote

I had a Behringer X-Touch that I used until I shut down my home recording studio. I liked the (very quiet) motorized faders. If I remember correctly Studio One automatically detected and configured for the Behringer.
_________________
GFI Ultra Keyless S-10 with pad (Black of course) TB202 amp, Hilton VP, Steelers Choice sidekick seat, SIT Strings
Cakewalk by Bandlab and Studio One V4.6 pro DAWs, MOTU Ultralite MK5 recording interface unit
View user's profile Send private message Send e-mail

Joseph Carlson


From:
Grass Valley, California, USA
Post  Posted 1 Apr 2021 6:01 am    
Reply with quote

Another Presonus fan here. I have bought way too much of their hardware over the years.

I happen to think Studio One is the most intuitive DAW I have ever come across. I like it so much I recently convinced my employer to buy an additional license for my work laptop. (I'm not a pro, but I use Studio One for editing podcasts and online training modules at my day gig.)

I have a Faderport 8 and I find it invaluable. I don't use many of the features, but the ones I do are huge time savers. My goal when using Studio One is to use my mouse as little as possible, which the Faderport facilitates.
View user's profile Send private message Send e-mail

b0b


From:
Cloverdale, CA, USA
Post  Posted 1 Apr 2021 8:17 am    
Reply with quote

Thanks, everyone, for your feedback. I'm going to buy it but, mindful of Jack Stoner's advise, I'll put it through all of its paces to make sure it's not defective. I'm as wary of Behringer as he is of PreSonus. They do make some good stuff, though. I used a Behringer mixer for my mics on Stella.

Studio One looks like a very good DAW, and the fact that several of you are using it professionally is encouraging to me. My limited experience with DAWs is:
  • GarageBand - not really made for musicians
  • Audacity - love it, but seems limited
  • Logic - very confusing
Until now, my multi-track recordings have all been on Roland V-Studio hardware. It seems that Roland has dropped out of the race, though. They haven't updated their audio interface unit since 2013 (USB-2 - 8 ms latency Oh Well ), and the V-Studio 2000-CD was the last model of the series. Sad.

Thanks again for the feedback and encouragement. I really appreciate it.
_________________
-š¯•“š¯•†š¯•“- (admin) - Robert P. Lee - Recordings - Breathe - D6th - Video
View user's profile Send private message Visit poster's website

Tony Prior


From:
Charlotte NC
Post  Posted 2 Apr 2021 12:38 am    
Reply with quote

Bob, while I am a Pro Tools user, if I had to move to another DAW it would be Studio One. The workflows are very similar and to me make very good sense. Studio One uses some different terminology but I believe Pro Tools users can sit in the Studio One Drivers seat in just a few minutes. Its a fine package.

Remember, every DAW, out of the gate, all we need to learn is how to arm a track with the proper input device, make sure we are not overdriving the input signal and then hit the red button and go ! Everything else we add if and when we need it. BABY steps !
_________________
Emmons L-II , Fender Telecasters, B-Benders
Pro Tools 12 on WIN 7 !
jobless- but not homeless- now retired 9 years

CURRENT MUSIC TRACKS AT > https://tprior2241.wixsite.com/website
View user's profile Send private message Send e-mail Visit poster's website

Dale Rottacker


From:
Walla Walla Washington, USA
Post  Posted 2 Apr 2021 7:07 am    
Reply with quote

Tony Prior wrote:
Bob, while I am a Pro Tools user, if I had to move to another DAW it would be Studio One. The workflows are very similar and to me make very good sense. Studio One uses some different terminology but I believe Pro Tools users can sit in the Studio One Drivers seat in just a few minutes. Its a fine package.

Remember, every DAW, out of the gate, all we need to learn is how to arm a track with the proper input device, make sure we are not overdriving the input signal and then hit the red button and go ! Everything else we add if and when we need it. BABY steps !

What Tony said... I actually DO use Studio One... I started on Reaper, looked at Audacity, and then bought a Mac mainly because of GarageBand... Did my first few recordings with it., but never liked the layout... the "faders" moving horizontally just didn't look right to any mixer I'd ever been on. I then bought a PreSonus interface that included the Free Version of StudioOne (Artist) I then moved to Studio One Professional, and the free stuff they through in with some of their updates is at times staggering... I've seen 50-100 free things with some of the Free Updates... Anyhow, I've always loved the intuitive workflow, that for me just works. Like anything there's a learning curve, but with all the YouTube videos available today, all you have to do is ask the right question.
_________________
Dale Rottacker, Steelinatuneā„¢
*2021 MSA Legend, "Jolly Rancher" D10 10x9
*2021 Rittenberry, "The Concord" D10 9x9
*1977 Blue Sho-Bud Pro 3 Custom 8x6
https://msapedalsteels.com
http://rittenberrysteelguitars.com
https://www.telonics.com/index.php
https://www.p2pamps.com
https://www.quilterlabs.com
View user's profile Send private message Send e-mail Visit poster's website

b0b


From:
Cloverdale, CA, USA
Post  Posted 20 Apr 2021 9:13 am    
Reply with quote

I put together the new system yesterday. Seems to work well. My 2017 iMac has been upgraded with a 2TB SSD and 32GB of RAM. Printed the 400-page Studio One manual and put it in a binder.

The learning curve might not be as steep as I feared. Cool


_________________
-š¯•“š¯•†š¯•“- (admin) - Robert P. Lee - Recordings - Breathe - D6th - Video
View user's profile Send private message Visit poster's website

Bill Terry


From:
Bastrop, TX
Post  Posted 20 Apr 2021 12:06 pm    
Reply with quote

Nice setup b0b... I've used Logic, Reaper, and now I'm on Studio One, and yeah, they're different, but they all work the same at the core if you ask me.

Learn how to arm a track and record (as Tony mentioned above) and from then on everything you learn is a plus. LOL.. My brain still works the way it did with multi-track tape recorders, and that translates ok to most.
_________________
Lost Pines Studio
"I'm nuts about bolts"
View user's profile Send private message Send e-mail

b0b


From:
Cloverdale, CA, USA
Post  Posted 20 Apr 2021 2:03 pm    
Reply with quote

Good advice. Thanks, guys.
_________________
-š¯•“š¯•†š¯•“- (admin) - Robert P. Lee - Recordings - Breathe - D6th - Video
View user's profile Send private message Visit poster's website

Mike Neer


From:
NJ
Post  Posted 23 Apr 2021 8:39 am    
Reply with quote

Looks like a nice little setup, b0b.

I have been using the Touch OSC app with my ipad, which does a lot of the same stuff as the single channel Presonus.Works great and cost me $4.99. I was about to go the route of a FaderPort but am happy for the time being.
_________________
http://www.steelinstruction.com/
http://mikeneer.com
View user's profile Send private message Send e-mail Visit poster's website

James Quackenbush

 

From:
Pomona, New York, USA
Post  Posted 10 Sep 2021 2:36 am    
Reply with quote

b0b,
Let us know how youĆ¢ā‚¬ā„¢re getting on with the 2626......Thanks, Jim
View user's profile Send private message Send e-mail

b0b


From:
Cloverdale, CA, USA
Post  Posted 10 Sep 2021 10:27 am    
Reply with quote

I haven't done any field work with it yet, but the 2626 is working well for little one-man sessions in my garage. Still trying to master Studio One. The real acid test will be when I'm using all 8 inputs at once. I'm not ready to try that yet.

I've barely scratched the surface of capabilities of the FaderPort 8. Complicated piece of machinery! Whoa!
_________________
-š¯•“š¯•†š¯•“- (admin) - Robert P. Lee - Recordings - Breathe - D6th - Video
View user's profile Send private message Visit poster's website

James Quackenbush

 

From:
Pomona, New York, USA
Post  Posted 10 Sep 2021 2:09 pm    
Reply with quote

b0b,
ThereĆ¢ā‚¬ā„¢s a lot to be learned....Take your time and donĆ¢ā‚¬ā„¢t get overwhelmed....To add insult to injury, you could be doing something correctly, and the program might just have a glitch (not your fault at all )....It will all come together in time...Jim
View user's profile Send private message Send e-mail


All times are GMT - 8 Hours
Jump to:  

Our Online Catalog
Strings, CDs, instruction,
steel guitars & accessories

www.SteelGuitarShopper.com

Please review our Forum Rules and Policies

Steel Guitar Forum LLC
PO Box 237
Mount Horeb, WI 53572 USA


Click Here to Send a Donation

Email admin@steelguitarforum.com for technical support.


BIAB Styles
Ray Price Shuffles for
Band-in-a-Box

by Jim Baron
HTTP