Fresh strings on lap, how often?

Steven Pearce · From: Port Orchard Washington, USA

Iâ€™m wondering how often you change your strings. Or do you keep em till they break then replace the broken ones? I been called wasteful because I put fresh strings on every other show (when we were playing showsðŸ˜Ž, thatâ€™s back in June!). Anyway, and maybe itâ€™s my ears, but after awhile strings seem to go flat. Not out of tune, but dull.? 22 1/2 â€œ
I use Ernie Balls, in sets I put together:
18P
22P
28
38
48
62

Iâ€™m just wondering...thanks.
Steve
_________________
http://www.fentonstwang.com/fr_home.cfm

Bill Hatcher · From: Atlanta Ga. USA

i keep them on for years, but after all the hassle of changing them...it is really nice to have a new set on.

if the sustain and the pitch is good...leave them alone. broken in strings stay in tune better. its when the sustain starts to impede things that they should be changed.

Eric Dahlhoff · From: Point Arena, California

Allan Revich · From: Victoria, BC

On electrics Iâ€™ve read comments from people who like to change strings between sets, from people who say once a week, and from people who say that they like their strings to be â€œbroken inâ€ and donâ€™t change them unless they break.

Acoustics seem to be less forgiving. The strings on my Dobro seem to die after only a couple weeks. On my electrics I donâ€™t change them unless I change the tuning or something happens to them.
_________________
Current Tunings:
6 String | G – D G D G B D
7 String | G9 – D G B D F A D
https://papadafoe.com/lap-steel-tuning-database

Glenn Wilde · From: California, USA

On my guitars with flats, i never change the wound strings once the tuning is established for that guitar. Acoustics get strings when they start sounding dead, electric's with rounds, same.

Nic Neufeld · From: Kansas City, Missouri

I'm not sure which is the bigger factor but:
1. I'm lazy/parsimonious
2. I don't mind the sound of long-dead strings

As long as they don't get rusty or corroded, they stay on! I like a warmer tone anyway, my tone pot is rarely full on (whereas on conventional guitar/bass I never use the tone pot, always full on).

Edited to add: think I've heard Meg Lovell is similar...preferring old strings for the tone. We go for different sounds/styles but I am similar.
_________________
Waikīkī, at night when the shadows are falling
I hear the rolling surf calling
Calling and calling to me

Jack Hanson · From: San Luis Valley, USA

"Fresh strings on lap, how often?"

Seldom (if ever) for me. The only time I would ever renew 'em is if one broke, or if I wanted to set the instrument up in a different tuning that required different gauges. The older the better for me. I'm not a fan of fresh stings on an electric lap steel. Fortunately, they don't stay fresh for long.

Pedal steel? Acoustics? An entirely different situation. I'll change 'em all if one begins to exhibit tuning issues.

Erv Niehaus · From: Litchfield, MN, USA

This product seems to freshen up and clean the strings.
And they make the bar slide smoother over the strings.

Tim Whitlock · From: Colorado, USA

I don't like the sizzle of new strings for lap steel. I like 'em old and mellow like me. Cool

Mike Neer · From: NJ

I donâ€™t change them often but when I do it usually makes me happy. I like the sound.
On my old tricones, I used to change the strings once a week and the 3rd string every other day.
One thing I notice is that my plain strings get dents in them, which makes me want to change them when I discover this. So, dents and dullness are the two motivating factors, no specific timeframe.
_________________
http://www.steelinstruction.com/
http://mikeneer.com

Erv Niehaus · From: Litchfield, MN, USA

Mike,
If you're getting dents, you need to ease up on those hammer ons! Laughing

Erv

Bill Groner · From: QUAKERTOWN, PA

Ian Rae · From: Redditch, England

Whether you change them every set or every other Christmas, remember - no-one can make you!

The acid test for me is if a string can't seem to get in tune whether you tighten it or loosen it, then it's lost the will to live and should be allowed to go.
_________________
Make sleeping dogs tell the truth!
Homebuilt keyless U12 7x5, Excel keyless U12 8x8, Williams keyless U12 7x8, Telonics rack and 15" cabs

Marc Bell · From: Surat Thani, TH

Regarding Erv's post about Fast Fret, yes brilliant stuff. Keeps my plain strings non rusted for well over a year in the tropics vs a week tops without it.
A neat trick when the fast fret stick gets a bit dry is to drop in a fair few drops of mineral oil and let it soak in, and your fast fret is as good as new. They always seem to dry out long before physically wearing out. my guitars now all smell of cherry blossom too!

edit to add, the only benefit I notice when using a new set of strings as opposed to strings lubed and preserved with FastFret is harmonics are easier to get.

Erv Niehaus · From: Litchfield, MN, USA

Marc,
Yes, it's surprising how much gunk you can wipe off the strings after you've used the Fast Fret. Very Happy

Erv

Steven Pearce · From: Port Orchard Washington, USA

Hey Eric, that one is in D. I play with a thumb pick and bare fingers with this band, and Iâ€™m not gentle with this steel. So strings get that thud pretty quick.
I love C6th and A6th Western swing and Hawaiian music, and played with picks and an easier touch, the strings on that steel will stay forever.
_________________
http://www.fentonstwang.com/fr_home.cfm

Forum Index > Steel Without Pedals		Next oldest topic :: Next newest topic

All times are GMT - 8 Hours	Jump to: