The Steel Guitar Forum Store 

Post new topic Yes Another Tuning thread..., but I'm a NEW
Goto page Previous  1, 2
Reply to topic
Author Topic:  Yes Another Tuning thread..., but I'm a NEW
Georg Sørtun


From:
Mandal, VA, Norway & Weeki Wachee, FL, USA
Post  Posted 4 May 2021 3:35 am    
Reply with quote

Hmm… as it only has to sound in tune, I practice the "constantly vary bar angle and pressure to keep it sounding right" techniques while playing, as I did before I got pedals back in the early -80s. For the most part my ear to hand coupling works quickly enough, and over the years "mental mapping" of how the individual strings react to changes in tension has of course improved and helps in eliminating much of the "reaction delay" one may experience if one rely too much on eyes and fretmarkers.

As for tuning: I have a few gismos (among others a Strobo Plus HD) that work just fine, but whenever possible I rely on a tuning fork in "A" and tune all else to "something" close to JI by ear.
I recommend "tuning and playing by ear" to anyone who asks, and to only use electronic tuners for checking ones ear now and then, and in situations when ear-tuning is impossible.
View user's profile Send private message Send e-mail Visit poster's website

Ian Rae


From:
Redditch, England
Post  Posted 4 May 2021 5:30 am    
Reply with quote

I do the same as Georg, except I'm a fundamentalist and I use an E fork Smile
_________________
Make sleeping dogs tell the truth!
Homebuilt keyless U12 7x5, Excel keyless U12 8x8, Williams keyless U12 7x8, Telonics rack and 15" cabs
View user's profile Send private message Send e-mail Visit poster's website

Bob Sykes


From:
North Carolina
Post  Posted 4 May 2021 5:57 am     tuning nuts
Reply with quote

I found color coding the pedals with their related tuning nuts helped find the right ones. Stage lighting washes out some of the colors though.
_________________
Carters Starter, D10 8+7, SD10
ISO Sustainus Ad Infinitum
View user's profile Send private message Send e-mail

Andrew Frost


From:
Toronto, Ontario
Post  Posted 4 May 2021 8:36 am    
Reply with quote

I think when you really get into it, how you intonate your thirds and other intervals comes down to context.

What Grorg is saying about "moving the bar a little bit" kind of sums it up.

In my experience, there are situations where a pure third will sound ridiculously flat. Usually in slow, single note phrases when the steel is sitting over some piano or acoustic guitar chords, for example. So left hand nuances kick in, and knowing your tuning plays a big part.

Other times, like when playing lush double stops, thirds and sixths will just ring so much better if they're beatless.

Granted, it is pretty hilarious to talk at such length about all this stuff. But I think its a big part of playing steel, and I think its good to have constructive conversations about it.
View user's profile Send private message Send e-mail

Philip Mitrakos


From:
The Beach South East Florida
Post  Posted 4 May 2021 3:23 pm    
Reply with quote

Play with this for a while
http://www.dronetonetool.com/
View user's profile Send private message Send e-mail

Ian Rae


From:
Redditch, England
Post  Posted 4 May 2021 3:28 pm    
Reply with quote

Andrew is right about varying your thirds depending on whether they're melody or harmony. (The part of me that plays trombone can confirm.)
_________________
Make sleeping dogs tell the truth!
Homebuilt keyless U12 7x5, Excel keyless U12 8x8, Williams keyless U12 7x8, Telonics rack and 15" cabs
View user's profile Send private message Send e-mail Visit poster's website

Georg Sørtun


From:
Mandal, VA, Norway & Weeki Wachee, FL, USA
Post  Posted 5 May 2021 3:37 am    
Reply with quote

Ian Rae wrote:
[…]I'm a fundamentalist and I use an E fork Smile
I found correctly tuned E-forks to produce a slightly too low frequency (about 0.7Hz too low) to work well as start-freq for tuning close to JI by ear – it is of course OK for tuning ET since that is what they are set up for. Thus, A-forks for me, as they produce the 440 freq that is used as reference in (nearly) all western music, and makes the question of tuning JI or ET further down irrelevant.

(The entire matter does of course only make sense if one likes the numbers to line up too, alongside the actual tones. The bar is still movable, but not the nut Smile​)
View user's profile Send private message Send e-mail Visit poster's website


All times are GMT - 8 Hours
Jump to:  
Please review our Forum Rules and Policies
Our Online Catalog
Strings, CDs, instruction, and accessories
www.SteelGuitarShopper.com
BIAB Styles
Ray Price Shuffles for Band-in-a-Box
by Jim Baron
The Steel Guitar Forum
148 S. Cloverdale Blvd.
Cloverdale, CA 95425 USA

Click Here to Send a Donation

Email SteelGuitarForum@gmail.com for technical support.