| Author |
Topic: Mullen G2 and alumitones |
Dan Chroninger
From:
Blackriver Falls, Wisconson, USA
|
Posted 21 Jan 2021 12:40 pm |
|
| has anyone tried Alumitone pickups on a Mullen G2 Mica |
|
|
|
Charlie Powell
From:
Kingsport, Tennessee, USA
|
Posted 21 Jan 2021 2:12 pm
|
|
I did for a bit. Sounded too compressed to me. Almost like a compressor pedal...
_________________
Charlie Powell |
|
|
|
Dan Chroninger
From:
Blackriver Falls, Wisconson, USA
|
Posted 21 Jan 2021 2:52 pm pickups
|
|
| what are you currently using.i switched from factory to 705 .,not happy with sound of them |
|
|
|
Dave Meis
From:
Olympic Peninsula, Washington, USA
|
Posted 21 Jan 2021 4:41 pm
|
|
| While I did like the sound of the 705 in my G2, I now have a Steeltronics pickup, and I could recommend them! |
|
|
|
Charlie Powell
From:
Kingsport, Tennessee, USA
|
Posted 21 Jan 2021 5:06 pm
|
|
my favorite is factory single coil, but using 705s so I don't fight the hum.
_________________
Charlie Powell |
|
|
|
rick andrews
From:
Westminster Co 80031
|
Posted 21 Jan 2021 7:51 pm
|
|
Dan,
FWIW, I put a Telonics X12 on my G2 and never looked back. It is as close to what I want as my technique will probably ever allow. |
|
|
|
mtulbert
From:
Plano, Texas 75023
|
Posted 22 Jan 2021 5:24 am
|
|
Dan,
I had a Mullen G2 with Alumitone pickups and thought they sounded great. Mickey Adams helped me put them in. It is not the easiest project but can be done.
Am attaching a couple of youtube clips for you to listen to.
https://www.youtube.com/watch?v=e5wYeUGZlZg
https://www.youtube.com/watch?v=lp6sG3hmA8U
Excuse my C6th playing. Not really very good at it
_________________
Mark T
Rittenberry Laquer D10, Rittenberry Prestige SD10, Revelation Preamp,Revelation Octal Preamp,Lexicon PCM 92 Reverb, Furlong Cabinet |
|
|
|
Dan Chroninger
From:
Blackriver Falls, Wisconson, USA
|
Posted 22 Jan 2021 10:45 am pickups
|
|
| Vary nice job. tells me what I wanted to know. Looking for something a little brighter in sound. |
|
|
|
Roger Crawford
From:
Griffin, GA USA
|
Posted 22 Jan 2021 8:35 pm
|
|
| Have any of you tried the 710 in a G2? |
|
|
|
Dennis Montgomery
From:
Western Washington
|
Posted 23 Jan 2021 10:16 am
|
|
| Roger Crawford wrote: |
| Have any of you tried the 710 in a G2? |
Good question.
I have a 712 (12 string version of the 710) in my mica SD12 G2 and love it. When I was researching which humbucker would work best for me several people here recommended the 710/712 series as the brightest sounding humbucker out there. Bought mine direct from the Bill Lawrence website and had it within a week. It works great for me as I play without picks so needed something very bright. Also, I was able to wire it with a coil tap switch so have the best of both worlds...bright humbucker and ultra bright single coil 
I should mention as an FYI, the links to the 2 SD12 G2 songs below were recorded on the stock Mullen single coil before I replaced it with the BL712...
_________________
Hear my latest album, "Celestial" featuring a combination of Mullen SD12 and Synthesizers:
https://www.youtube.com/watch?v=mhh6b_xXTx4&list=PLfXm8aXRTFz0x-Sxso0NWw493qAouK
Hear my album, "Armistice" featuring Fender 400 on every song:
https://www.youtube.com/playlist?list=PLfXm8aXRTFz2Pz_GXhvmjne7lPEtsplyW
Hear my Pedal Steel Only playlist featuring Mullen G2 SD12 on covers like Candyman, Wild Horses, Across the Universe & more...
https://www.youtube.com/playlist?list=PLfXm8aXRTFz2f0JOyiXpZyzNrvnJObliA |
|
|
|
Bill Cunningham
From:
Atlanta, Ga. USA
|
Posted 25 Jan 2021 6:22 pm
|
|
I have 2 G2’s and have had Alumitones, 705’s and Mullen single coils. I settled on the Mullen single coil. YMMV.
_________________
Bill Cunningham
Atlanta, GA |
|
|
|
Ken Byng
From:
Southampton, England
|
Posted 28 Apr 2021 7:15 am
|
|
Hi Mark. That was a better tone than I got from my Mullen Royal Precision which was so bright in the tone department that it would take the skin off your teeth! Hope you're doing well buddy.
_________________
Show Pro D10 - amber (8+6), MSA D10 Legend XL Signature - redburst (9+6), Sho-Bud Pro 111 Custom (8+6), Emmons black Push-Pull D10 (8+5), Zum D10 (8x8), Hudson pedal resonator. Telonics TCA-500, Webb 614-E, |
|
|
|
Dan Chroninger
From:
Blackriver Falls, Wisconson, USA
|
Posted 28 Apr 2021 11:00 am
|
|
| thanks i put a pair on much better but still have the bite I'm looking for |
|
|
|
Bill Miller
From:
Gaspe, Quebec, Canada
|
Posted 28 Apr 2021 6:06 pm
|
|
| I've currently got Bill Lawrence LXR-16 in my G2 and I like it. To me it sounds sweeter than the Telonics 409 I had in there before which seemed very hot and I couldn't get it adjusted to my liking. Maybe in a different guitar. |
|
|
|
mtulbert
From:
Plano, Texas 75023
|
Posted 29 Apr 2021 4:55 am
|
|
Ken
Sent you a PM
_________________
Mark T
Rittenberry Laquer D10, Rittenberry Prestige SD10, Revelation Preamp,Revelation Octal Preamp,Lexicon PCM 92 Reverb, Furlong Cabinet |
|
|
|
Dan Chroninger
From:
Blackriver Falls, Wisconson, USA
|
Posted 29 Apr 2021 7:47 am
|
|
| did not receive |
|
|
|
Ken Byng
From:
Southampton, England
|
Posted 30 Apr 2021 2:09 am
|
|
| mtulbert wrote: |
Ken
Sent you a PM |
Replied Mark. 
_________________
Show Pro D10 - amber (8+6), MSA D10 Legend XL Signature - redburst (9+6), Sho-Bud Pro 111 Custom (8+6), Emmons black Push-Pull D10 (8+5), Zum D10 (8x8), Hudson pedal resonator. Telonics TCA-500, Webb 614-E, |
|
|
|
