| Author |
Topic: Canare GS-4 GS-6 negative wire??? |
Tom Campbell
From:
Houston, Texas, USA
|
Posted 23 Apr 2021 1:50 pm |
|
Is the braided copper shield wire on the Canare cable also the negative wire?
Are you suppose to twist it into a wire configuration and solder it to the negative post on the 1/4" jack?
Thanks for any assistance. |
|
|
|
Georg Sørtun
From:
Mandal, Agder, Norway
|
Posted 23 Apr 2021 3:58 pm
|
|
| Yes, that is the shield/GND. |
|
|
|
Jeff Highland
From:
New South Wales, Australia
|
Posted 23 Apr 2021 5:42 pm
|
|
Also make sure you cut back the black layer under it so it is not near the positive lug.
This is semicomductive not insulation.
_________________
Duesenberg Fairytale
1949 Supro Supreme
1950 National New Yorker
2008 Highland Baritone Weissenborn
2020 Highland New Yorker.
2020 Highland Mohan Veena
2021 Highland Weissencone |
|
|
|
Tom Campbell
From:
Houston, Texas, USA
|
Posted 23 Apr 2021 6:03 pm
|
|
Thank you for the replies!
Got it. |
|
|
|
Peter Harris
From:
South Australia, Australia
|
Posted 25 Apr 2021 3:06 am
|
|
| Jeff Highland wrote: |
Also make sure you cut back the black layer under it so it is not near the positive lug.
This is semicomductive not insulation. |
We are talking the THIN black layer here, NOT the (real) insulation that is inside THAT.... hope that makes sense...
Cheers,
Peter
_________________
If my wife is reading this, I don't have much stuff....really! |
|
|
|
