The Steel Guitar Forum Store 

Post new topic Middle G on E9th?
Goto page 1, 2  Next
Reply to topic

How do you get the middle G on E9th?
Traditional knee lever raise on string 7
20%
 20%  [ 23 ]
Half stop on string 7 knee lever raise
8%
 8%  [ 9 ]
Lower string 6 on a pedal
3%
 3%  [ 4 ]
Lower string 6 on a knee lever
19%
 19%  [ 22 ]
Combine string 6 full-step lower with B pedal
31%
 31%  [ 35 ]
Pull string 7 behind the bar with fingers
0%
 0%  [ 1 ]
I don't have a middle G note
11%
 11%  [ 13 ]
Other? Please explain.
3%
 3%  [ 4 ]
Total Votes : 111

Author Topic:  Middle G on E9th?
b0b


From:
Cloverdale, CA, USA
Post  Posted 28 Nov 2020 8:26 am    
Reply with quote

Another topic (https://bb.steelguitarforum.com/viewtopic.php?t=364230) got me wondering statistically where we are about the middle G note on E9th, so I decided to start a poll.

update: I forgot to accommodate people who have more than one way to get a G. Embarassed Choose the one you use most.
_________________
-𝕓𝕆𝕓- (admin) - Robert P. Lee - Recordings - Breathe - D6th - Video


Last edited by b0b on 28 Nov 2020 5:01 pm; edited 1 time in total
View user's profile Send private message Visit poster's website

Fred Treece


From:
California, USA
Post  Posted 28 Nov 2020 9:15 am    
Reply with quote

I tried life without a G change. I barely survived. I like it on LKV. (It does both 7 and 1).

Last edited by Fred Treece on 28 Nov 2020 11:07 am; edited 1 time in total
View user's profile Send private message Send e-mail

Dale Rottacker


From:
Walla Walla Washington, USA
Post  Posted 28 Nov 2020 9:24 am    
Reply with quote

Actually in 3 ways... too much? lol

Half stop raise on 7
Half lower on 6 & 9 with a knee lever, but moving that to the floor just left of 0 pedal where I lower 5 & 10 a half
Whole lower of 6 on Vertical split with B
_________________
Dale Rottacker, Steelinatune™
*2021 MSA Legend, "Jolly Rancher" D10 10x9
*2021 Rittenberry, "The Concord" D10 9x9
*1977 Blue Sho-Bud Pro 3 Custom 8x6
https://msapedalsteels.com
http://rittenberrysteelguitars.com
https://www.telonics.com/index.php
https://www.p2pamps.com
https://www.quilterlabs.com
View user's profile Send private message Send e-mail Visit poster's website

Larry Bressington


From:
Nebraska
Post  Posted 28 Nov 2020 10:22 am    
Reply with quote

I'm in the no G camp, also no raise on 7, it's a little bit more work being without it, but it's also less hardware and dial up, sometimes i struggle with my own justification of why i like the idea of less, but i sort of like the challenge of a primitive set up.
_________________
A.K.A Chappy.
View user's profile Send private message

Jack Hanson


From:
San Luis Valley, USA
Post  Posted 28 Nov 2020 10:44 am    
Reply with quote

Larry Bressington wrote:
...i sort of like the challenge of a primitive set up.

Me too. I went from an 8x6 D-10 to a 3x1 single-neck and a gaggle of lap steels without missing a beat (well... almost). Tuning is exponentially more simplified, and 99% of what I want to play, I can still play. Big bonus: my back has never been happier.
View user's profile Send private message Send e-mail

Norman Evans


From:
Tennessee
Post  Posted 28 Nov 2020 11:24 am    
Reply with quote

I lower 6 to G on RKL. With pedals down, I release the B pedal and activate the RKL for a 7th chord. I also activate the RKL and slide the bar up 2 frets for the same thing I get with the B&C pedals. Also get the minor.
View user's profile Send private message Send e-mail

Richard Sinkler


From:
aka: Rusty Strings -- Missoula, Montana
Post  Posted 28 Nov 2020 12:15 pm    
Reply with quote

I've been raising both F#'s to G on LKV since maybe a year into my PSG journey. Love the change. I also lower and split string 6 to get that middle G.
_________________
Carter D10 8p/8k, Dekley S10 3p/4k C6 setup,Regal RD40 Dobro, NV400, NV112 . Playing for 54 years and still counting.
View user's profile Send private message Send e-mail

John Swain


From:
Winchester, Va
Post  Posted 28 Nov 2020 1:36 pm    
Reply with quote

I lower 3+6 to G on LKV, and raise 1,2+7 with feel stop G on LKR !
View user's profile Send private message Send e-mail

Ian Rae


From:
Redditch, England
Post  Posted 28 Nov 2020 1:44 pm    
Reply with quote

Great subject for a poll - this could run and run!
_________________
Make sleeping dogs tell the truth!
Homebuilt keyless U12 7x5, Excel keyless U12 8x8, Williams keyless U12 7x8, Telonics rack and 15" cabs
View user's profile Send private message Send e-mail Visit poster's website

Scott Swartz


From:
St. Louis, MO
Post  Posted 28 Nov 2020 2:35 pm    
Reply with quote

Lower both 3 and 6 to G on pedal zero, and added the string 9 D to C# to the pedal ala Randy Beavers for the C6 pedal 6 like change. Also raise string 7 F# to G for pedals down dom7.
_________________
Scott Swartz
Steeltronics - Steel Guitar Pickups
www.steeltronics.com
View user's profile Send private message Send e-mail Visit poster's website

Marty Broussard


From:
Broussard, Louisiana, USA
Post  Posted 28 Nov 2020 3:05 pm    
Reply with quote

I like this discussion. I am looking at where to put it back on....
_________________
RETIRED

"Technique is really the elimination of the unnecessary..it is a constant effort to avoid any personal impediment or obstacle to achieve the smooth flow of energy and intent" Yehudi Menuhin
View user's profile Send private message Send e-mail

Brint Hannay

 

From:
Maryland, USA
Post  Posted 28 Nov 2020 3:27 pm    
Reply with quote

I lower string 6 and string 3 to G on LKL front, and raise string 7, but not string 1, to G on LKV. (I like having the F# on 1 with the pedals-down A7 as a melody note or for the A13 chord.)

On my LDG with only 4 knees, I have a half stop on the string 6 whole-step lower, LKR.
View user's profile Send private message Send e-mail

Marc Jenkins


From:
Victoria, British Columbia, Canada
Post  Posted 28 Nov 2020 3:32 pm    
Reply with quote

I submitted ‘half-stop on knee lever raise’ as I use that more - just love the dissonance with AB down! But also lower 3&6 half step on a pedal.
View user's profile Send private message Send e-mail

Kelcey ONeil


From:
Sevierville, TN
Post  Posted 28 Nov 2020 3:38 pm    
Reply with quote



This is a setup I did for an Emmons Push Pull. The RKL raises 1 and 7 a half and whole tone, with the half tone on a feel stop. The stop tension is adjustable, with the half tone notes independently adjustable from each other.

Also, you can coax the Push Pull to do the AB pedals down, and lower the 6th a whole tone as well. The first setup is a bit more versatile I think though.
View user's profile Send private message Send e-mail Visit poster's website

b0b


From:
Cloverdale, CA, USA
Post  Posted 28 Nov 2020 5:12 pm    
Reply with quote

I play a D6th tuning with E9th pedals added on the left, so it's actually an F note, not a G. I have the lever that lowers the string a full step (LKR), and the split combination with the B pedal. I use that mostly for 7th chords. The lever also raises the first string half a step.

But I also have the standard C6th pedal P6 that lowers E to Eb (in my case F# to F). I use it mostly for minor chords and of course for the usual C6th applications.

Since I use the split combination more often, that's what I chose in the poll. Also, it's what I have on my experimental D9th guitar.
_________________
-𝕓𝕆𝕓- (admin) - Robert P. Lee - Recordings - Breathe - D6th - Video
View user's profile Send private message Visit poster's website

b0b


From:
Cloverdale, CA, USA
Post  Posted 28 Nov 2020 5:13 pm    
Reply with quote

Fred Treece wrote:
I tried life without a G change. I barely survived.


Laughing Laughing Laughing
View user's profile Send private message Visit poster's website

Larry Bressington


From:
Nebraska
Post  Posted 28 Nov 2020 5:44 pm    
Reply with quote

I wonder when this became the norm, I don’t remember any of the old boys doing it looking through their co-peds, Lloyd, Hal, Sonny, Weldon, slide up three frets hit A pedal, slide down two frets hit A/B pedal or stay right where you are at and mute 3rd tone playing root and 5th....Anyone know who started the 6th string drop?
_________________
A.K.A Chappy.
View user's profile Send private message

Jack Hanson


From:
San Luis Valley, USA
Post  Posted 28 Nov 2020 6:04 pm    
Reply with quote

Larry Bressington wrote:
Who started the 6th string drop?
It's always been my impression the G# to F# drop on string 6 was pioneered by the Big E. It's featured prominently in the old BE-E9 course released by the Emmons Guitar Company in the '70s.


Most certainly someone will correct me if I'm wrong.
View user's profile Send private message Send e-mail

Larry Bressington


From:
Nebraska
Post  Posted 28 Nov 2020 8:42 pm    
Reply with quote

Thanks Jack, I was thinking it might of been a Buddy thing, appreciate the info my friend.
_________________
A.K.A Chappy.
View user's profile Send private message

Pete Burak

 

From:
Portland, OR USA
Post  Posted 28 Nov 2020 9:29 pm    
Reply with quote

On S12U I lower all three G#'s to G.
At first I did this on Pedal-0.
Now I have a RKL-2 that is close to the front apron that does this change.
I use it in the same way you would make a G barre chord into a Gminor on guitar.
I also use it with AB down, releasing the B pedal and engaging the G#-to-G to go to a 7th chord.
I also have a few cool licks that I like to do where it gives me the right note in the right place at the right time.
It's nice to have but not necessary. I have some Steels that don't have it at all.
View user's profile Send private message Send e-mail

Jim Fiegen


From:
California, USA
Post  Posted 29 Nov 2020 5:36 am     middle G change
Reply with quote

I wrote a blog post on the subject that might be of interest....
https://jimfiegen.com/the-g-to-g-change/
_________________
http://jimfiegen.com
View user's profile Send private message Send e-mail Visit poster's website

Donny Hinson

 

From:
Glen Burnie, Md. U.S.A.
Post  Posted 29 Nov 2020 6:44 am    
Reply with quote

Well, I never really use it as a scale note, but I do have it on a vertical.
View user's profile Send private message Send e-mail

Richard Sinkler


From:
aka: Rusty Strings -- Missoula, Montana
Post  Posted 29 Nov 2020 7:04 am    
Reply with quote

I'm actually about to make some changes to my E9 setup (I play the Day setup). I currently have:
Tab:

    LKL1  LKL2  LKV  LKR  C     B     A     RKL    RKR

F#.........G#....G
D#.........E................................D/C#
G#..............................A
E....D#...............F...F#
B.........................C#..........C#
G#..............................A..................F#
F#..............G
E....D#...............F
D............................................C#
B.....................................C#


But, I am thinking of changing up the the F# string changes. I will be eliminating the F# to G changes on LKV, and moving the 1st and 2nd string changes to LKV and possibly adding the 7th string F# to G# on LKV also. When playing licks and runs using the 1st string F# to G, it's about 50/50 that I use the lever or just use my middle finger behind the bar and pull string 1 to G (I could never get good at pulling string 7 behind the bar though). It's faster than hitting a lever, and to tell you the truth, it looks pretty darn cool. Whoa! I'm pretty sure that I could hit the vertical half way if needed to get the G notes. I tried a half stop on the vertical once, but it was too hard to distinguish where it was. It's much easier on left or right moving levers.

My proposed setup:
Tab:

    LKL1  LKL2  LKV   LKR   C    B    A   RKL   RKR

F#..............G#
D#..............E.........................C#/D
G#...............................A
E....D#................F...F#
B.........Bb/C-(SPLIT).....C#........C#
G#...............................A...............F#
F#..............G#
E....D#................F
D.........................................C#
B.........Bb (NO SPLIT)..............C#

_________________
Carter D10 8p/8k, Dekley S10 3p/4k C6 setup,Regal RD40 Dobro, NV400, NV112 . Playing for 54 years and still counting.
View user's profile Send private message Send e-mail

Jack Stoner


From:
Kansas City, MO
Post  Posted 29 Nov 2020 7:38 am    
Reply with quote

Larry Bressington wrote:
I wonder when this became the norm, I don’t remember any of the old boys doing it looking through their co-peds, Lloyd, Hal, Sonny, Weldon, slide up three frets hit A pedal, slide down two frets hit A/B pedal or stay right where you are at and mute 3rd tone playing root and 5th....Anyone know who started the 6th string drop?


Johnny Cox added the 7th string F# to G to my Steel in 72. Told me Buddy Charleton called it his Ernest Tubb lever.
You can get the Ernest Tubb lick all on one fret, don't have to move the bar with this change. Works for the Emmons lick he used on "Don't you ever get tired of hurting me".
_________________
GFI Ultra Keyless S-10 with pad (Black of course) TB202 amp, Hilton VP, Steelers Choice sidekick seat, SIT Strings
Cakewalk by Bandlab and Studio One V4.6 pro DAWs, MOTU Ultralite MK5 recording interface unit
View user's profile Send private message Send e-mail

Charles Kurck


From:
Living in Arkansas but Heaven is home
Post  Posted 29 Nov 2020 8:20 am     7th Chords
Reply with quote

I currently raise string 7 from F# to G.  
If using 3 picks and playing a 5, 6, 8 string grip for the A chord with pedals down, 
a thumb rake will give a full 4 note chord with the 7th tone on the 7th string.  

Using the same 5, 6, 8 string grip with pedals down, 
lower string 6 from A to G and you lose the root note
but I think this is a popular choice because it's a simple grip and it sounds good.  

Another option that I've not tried but have been considering is raising string 8 three semitones from E to G.  
It would still be the easy 5, 6, 8 string grip but you would lose the 5th tone instead of the root.  
This would give a movement similar to the pedals up 7th chord that raises string 10 from B to D.  
_________________
"Life is better if we're saved, and death is too."
View user's profile Send private message Send e-mail


All times are GMT - 8 Hours
Jump to:  

Our Online Catalog
Strings, CDs, instruction,
steel guitars & accessories

www.SteelGuitarShopper.com

Please review our Forum Rules and Policies

Steel Guitar Forum LLC
PO Box 237
Mount Horeb, WI 53572 USA


Click Here to Send a Donation

Email admin@steelguitarforum.com for technical support.


BIAB Styles
Ray Price Shuffles for
Band-in-a-Box

by Jim Baron
HTTP