| Author |
Topic: Nv1000 |
Mike Bowles
From:
Princeton, West Virginia, USA
|
Posted 11 Sep 2020 2:08 pm |
|
what would cause my nv1000 to be real noisy past 2 on the volume could it be the pots
what cause my nv1000 to be real noisy past 2 on the volume dirty pots maybe? thanks
_________________
Mike Bowles |
|
|
|
Larry Dering
From:
Missouri, USA
|
Posted 11 Sep 2020 2:29 pm
|
|
| Mike, a little more info might help. Pop and crackle, or what kind of noise? |
|
|
|
Mike Bowles
From:
Princeton, West Virginia, USA
|
Posted 11 Sep 2020 3:22 pm Nv1000
|
|
its more of a hum but real loud crackle thanks Larry
_________________
Mike Bowles |
|
|
|
Sandy Inglis
From:
Christchurch New Zealand
|
Posted 12 Sep 2020 12:05 am
|
|
It may not be relevant but clean/check the molex connector from the power supply to the main board as they're prone to causing problems!
_________________
01'Zumsteel D10 9+9; Sho Bud D10 SuperPro; 6 String Lap Steel (Homemade); Peavey Nashville 1000; Fender Deluxe 85;
1968 Gibson SG; Taylor 710 CE; Encore Tele Copy; Peterson Tuner; HIWATT T40 C 40W/20W Combo |
|
|
|
David Nugent
From:
Gum Spring, Va.
|
Posted 12 Sep 2020 4:11 am
|
|
| If you leave the volume control at a constant setting for long periods, the "scratching" sound may be the result of a faulty pot. You might try turning the volume knob from fully off to max on and back a few times. |
|
|
|
Mike Bowles
From:
Princeton, West Virginia, USA
|
Posted 12 Sep 2020 11:42 am nv1000
|
|
thanks guys will clean with deoxit fader lube and try that
_________________
Mike Bowles |
|
|
|
