Author |
Topic: Rosalee - Late 70s Push Pull Restro Project |
Barry Blackwood
|
Posted 7 Oct 2019 8:58 am
|
|
Quote: |
When you get this old it's all you can do to remember how you used to play |
You said a mouthful, Mike. Very profound! |
|
|
|
Mike Scaggs
From: Nashville, TN
|
Posted 7 Oct 2019 12:06 pm
|
|
Tony Glassman wrote: |
I agree with polishing all metal.....I even buff the beveled ends of the cross-shafts where they pass through the apron mounting pedal brackets and also the inner hooks on the pedal rods.
On my 78 keeper D-10 rebuild, I also did the “ball-bearing†mod. The mod consists of taking off about 1/32†off each cross-shaft end and inserting a ball bearing between each end of the. cross-shaft end and the apron. It contributed to smooth smoother & lighter pedal action.
Lastly, at the suggestion of fellow forumite Larry Behm, I removed the pedal return springs on A&B. All in all, this p/p pedals as nicely as my LG II. |
Ha! I do all those same mods and they do matter as you know. The return spring thing is ok to do as well but I end up just relieving the spring tension so I can leave them on the guitar. You can just about set a PP up with no springs on the rods too but you better know how to balance one out and adjust it or things get weird.
Cheers _________________ I can explain it to you but I can't understand it for you
Zum double Hybrid 8x9, 64 Twin (JBLs), p2pAmps Bad-Dawg, p2pAmps Tremendous Reverb, Visit my website www.p2pamps.com |
|
|
|
Andy DePaule
From: Saigon, Viet Nam & Springfield, Oregon
|
Posted 7 Oct 2019 2:25 pm Guess it's a No Deal
|
|
Johnie King wrote: |
Andy u could trade your project steel in on Roselee |
I'm for it but guess it's a No Deal...
Seriously, I never owned a PP until I got the Promat a couple of years ago.
I'm still not really used to it yet.
Once all repaired and set up right it's an amazing steel, but compared to what Mike did for that Emmons steel, it just can't compare. What he decided to do and how he has carried out the work is really a thing to behold.
Really wish I owned such a thing of beauty. _________________ Inlaid Star Guitar 2006 by Mark Giles. SD-10 4+5 in E9th; http://luthiersupply.com/instrument-gallery.html
2017 Mullen SD-10, G2 5&5 Polished Aluminum covering. Custom Build for me. Great Steel.
Clinesmith Joaquin Murphy style Aluminum 8 String Lap Steel Short A6th.
Magnatone Jeweltone Series Lap Steel, Circa 1950? 6 String with F#minor7th Tuning.
1956 Dewey Kendrick D-8 4&3, Restoration Project.
1973 Sho~Bud Green SD-10 4&5 PSG, Restoration Project. |
|
|
|
Kevin Fix
From: Michigan, USA
|
Posted 7 Oct 2019 2:57 pm
|
|
Beautiful job there Mike!!!! Man after my own heart!!!! My Super Pro has been on the kitchen table a few times!!!! |
|
|
|
Dennis Brion
From: Atwater, Ohio USA
|
Posted 7 Oct 2019 4:00 pm
|
|
That is one fabulous looking steel! _________________ 1969 Custom built d10, Fender 25R practice amp,Dunlop pedal, Peavy Special 130 w/15" Blackwidow, Gretsch resonator, 41 Gibson 7 string lap steel, Epiphone flat top, 67 Epiphone Olympic |
|
|
|
Johnie King
From: Tennessee, USA
|
Posted 7 Oct 2019 4:13 pm
|
|
Yes Andy Mikes attention too detail is unreal he’s a old school craftsman a dying breed her in the U S. |
|
|
|
Mike Scaggs
From: Nashville, TN
|
Posted 7 Oct 2019 4:18 pm
|
|
Thank you guys, I appreciate your feedback very much... _________________ I can explain it to you but I can't understand it for you
Zum double Hybrid 8x9, 64 Twin (JBLs), p2pAmps Bad-Dawg, p2pAmps Tremendous Reverb, Visit my website www.p2pamps.com |
|
|
|
Tony Glassman
From: The Great Northwest
|
Posted 7 Oct 2019 5:34 pm
|
|
Mike Scaggs wrote: |
Tony Glassman wrote: |
I agree with polishing all metal.....I even buff the beveled ends of the cross-shafts where they pass through the apron mounting pedal brackets and also the inner hooks on the pedal rods.
On my 78 keeper D-10 rebuild, I also did the “ball-bearing†mod. The mod consists of taking off about 1/32†off each cross-shaft end and inserting a ball bearing between each end of the. cross-shaft end and the apron. It contributed to smooth smoother & lighter pedal action.
Lastly, at the suggestion of fellow forumite Larry Behm, I removed the pedal return springs on A&B. All in all, this p/p pedals as nicely as my LG II. |
Ha! I do all those same mods and they do matter as you know. The return spring thing is ok to do as well but I end up just relieving the spring tension so I can leave them on the guitar. You can just about set a PP up with no springs on the rods too but you better know how to balance one out and adjust it or things get weird.
Cheers |
I know a lot of guys swear by removing all pull/ push rod compression springs because they add resistance but I like to use them sparingly in the shortest length possible for smoother balancing and tuning forgiveness.
BTW, all your rebuilds are beautifully done. I’d like to get the chance to play one of th in the future. |
|
|
|
Mike Scaggs
From: Nashville, TN
|
Posted 7 Oct 2019 8:06 pm
|
|
It has begun
_________________ I can explain it to you but I can't understand it for you
Zum double Hybrid 8x9, 64 Twin (JBLs), p2pAmps Bad-Dawg, p2pAmps Tremendous Reverb, Visit my website www.p2pamps.com |
|
|
|
Henry Matthews
From: Texarkana, Ark USA
|
Posted 8 Oct 2019 8:36 am
|
|
Yes Tony, I also remove the pedal return springs because ones usually on push pulls are way to stiff for what they do which makes pedals mushy to me. On my last push pull project, I found some springs at Ace hardware that were same size but were a lot easier or less stiff I mean. They work great to return pedals and can’t even tell they on there plus they are all shined which looks really good. _________________ Henry Matthews
D-10 Magnum, 8 &5, dark rose color
D-10 1974 Emmons cut tail, fat back,rosewood, 8&5
Nashville 112 amp, Fishman Loudbox Performer amp, Hilton pedal, Goodrich pedal,BJS bar, Kyser picks, Live steel Strings. No effects, doodads or stomp boxes. |
|
|
|
Mike Scaggs
From: Nashville, TN
|
Posted 8 Oct 2019 8:38 am
|
|
Henry Matthews wrote: |
Yes Tony, I also remove the pedal return springs because ones usually on push pulls are way to stiff for what they do which makes pedals mushy to me. On my last push pull project, I found some springs at Ace hardware that were same size but were a lot easier or less stiff I mean. They work great to return pedals and can’t even tell they on there plus they are all shined which looks really good. |
McMaster Carr is another great resource to find springs in every size and tension you may need. Plus they have all the hardware in the world too.
Cheers _________________ I can explain it to you but I can't understand it for you
Zum double Hybrid 8x9, 64 Twin (JBLs), p2pAmps Bad-Dawg, p2pAmps Tremendous Reverb, Visit my website www.p2pamps.com |
|
|
|
Henry Matthews
From: Texarkana, Ark USA
|
Posted 8 Oct 2019 9:18 am
|
|
Thanks Mike, I’ll check them out. Here’s couple pics of one I just finished. It had 40 extra holes in cabinet and someone had put those brass ShoBud barrels instead of collars and compression springs, lol. Needless to say, they weren’t working. No way to tune guitar, lol. I patched holes and flocked it. Notice the new pedal return springs I found at Ace and I also put the 6th string whole step lower with the half step split that works off B pedal. I use this a lot and have it on both my guitars and works great on a push pull.
_________________ Henry Matthews
D-10 Magnum, 8 &5, dark rose color
D-10 1974 Emmons cut tail, fat back,rosewood, 8&5
Nashville 112 amp, Fishman Loudbox Performer amp, Hilton pedal, Goodrich pedal,BJS bar, Kyser picks, Live steel Strings. No effects, doodads or stomp boxes. |
|
|
|
Tony Glassman
From: The Great Northwest
|
Posted 9 Oct 2019 4:43 pm
|
|
Henry Matthews wrote: |
Thanks Mike, I’ll check them out. Here’s couple pics of one I just finished. It had 40 extra holes in cabinet and someone had put those brass ShoBud barrels instead of collars and compression springs, lol. Needless to say, they weren’t working. No way to tune guitar, lol. I patched holes and flocked it. Notice the new pedal return springs I found at Ace and I also put the 6th string whole step lower with the half step split that works off B pedal. I use this a lot and have it on both my guitars and works great on a push pull.
|
Is the 6th string split, the one that is done by adding an extra bell crank pull at the 6th string on pedal A (Bs—> C#s) which prevents the the whole tone drop on string 6 from G# to F# when the KL & A pedal are used together
I’d forgotten about that trick. Wasn’t that a originally a Jimmy Crawford innovation? |
|
|
|
Henry Matthews
From: Texarkana, Ark USA
|
Posted 9 Oct 2019 7:14 pm
|
|
Yes, that’s it Tony, I don’t know who came up with the idea but works very well and doesn’t bother A pedal at all. _________________ Henry Matthews
D-10 Magnum, 8 &5, dark rose color
D-10 1974 Emmons cut tail, fat back,rosewood, 8&5
Nashville 112 amp, Fishman Loudbox Performer amp, Hilton pedal, Goodrich pedal,BJS bar, Kyser picks, Live steel Strings. No effects, doodads or stomp boxes. |
|
|
|
Mike Scaggs
From: Nashville, TN
|
Posted 10 Oct 2019 9:39 am
|
|
Henry Matthews wrote: |
Yes, that’s it Tony, I don’t know who came up with the idea but works very well and doesn’t bother A pedal at all. |
Yes I do that by request. I believe Billy Knowles showed my that a long time ago. Good mod to add. _________________ I can explain it to you but I can't understand it for you
Zum double Hybrid 8x9, 64 Twin (JBLs), p2pAmps Bad-Dawg, p2pAmps Tremendous Reverb, Visit my website www.p2pamps.com |
|
|
|
Mike Scaggs
From: Nashville, TN
|
Posted 10 Oct 2019 9:40 am
|
|
Ole Rosalee is getting close now
_________________ I can explain it to you but I can't understand it for you
Zum double Hybrid 8x9, 64 Twin (JBLs), p2pAmps Bad-Dawg, p2pAmps Tremendous Reverb, Visit my website www.p2pamps.com |
|
|
|
Russ Tkac
|
Posted 10 Oct 2019 5:53 pm
|
|
Wonderful Mike! |
|
|
|
Mike Scaggs
From: Nashville, TN
|
Posted 13 Oct 2019 5:26 pm
|
|
Lowering rods just about done
_________________ I can explain it to you but I can't understand it for you
Zum double Hybrid 8x9, 64 Twin (JBLs), p2pAmps Bad-Dawg, p2pAmps Tremendous Reverb, Visit my website www.p2pamps.com |
|
|
|
Johnny Cox
From: Williamsom WVA, raised in Nashville TN, Lives in Hallettsville Texas
|
Posted 14 Oct 2019 3:40 pm
|
|
Henry Matthews wrote: |
Yes, that’s it Tony, I don’t know who came up with the idea but works very well and doesn’t bother A pedal at all. |
Jimmy Crawford came up with that in the 70s. I showed it to Bolly Knoweles a couple years back. _________________ Johnny "Dumplin" Cox
"YANKIN' STRINGS & STOMPIN' PEDALS" since 1967. |
|
|
|
john widgren
From: Wilton CT
|
Posted 16 Oct 2019 5:37 am Really something
|
|
This is worth repeating: WOW!!
Great Mike!
JW _________________ Steel Guitar Services:
Live performance and recording. Instruments, repairs and lessons. Fresh bait/discount sushi.
(203) 858-8498
widcj@hotmail.com |
|
|
|
Jerry Overstreet
From: Louisville Ky
|
Posted 16 Oct 2019 5:53 am
|
|
Mercy! That's almost too pretty to play. |
|
|
|
Skip Edwards
From: LA,CA
|
Posted 16 Oct 2019 7:25 am
|
|
Chrome 705's! Good call...
Awesome, Mike. |
|
|
|
Mike Scaggs
From: Nashville, TN
|
Posted 18 Oct 2019 12:58 pm
|
|
Rosalee is now completed she is looking good and sounding good. This was a fun project that lasted a very long time but now she is ready for her new home and owner. Thanks for all the comments and interest in this guitar. It's always a pleasure hearing from fellow steel guitar players and lovers.
Cheers
_________________ I can explain it to you but I can't understand it for you
Zum double Hybrid 8x9, 64 Twin (JBLs), p2pAmps Bad-Dawg, p2pAmps Tremendous Reverb, Visit my website www.p2pamps.com |
|
|
|
Tim Johnson
From: Cadiz, KY, USA
|
Posted 21 Oct 2019 2:43 am Rosalee
|
|
Great job Mike |
|
|
|