The Steel Guitar Forum Store 

Post new topic New Player Buying advice
Goto page Previous  1, 2
Reply to topic
Author Topic:  New Player Buying advice
David Nugent

 

From:
Gum Spring, Va.
Post  Posted 11 Jul 2019 3:35 am    
Reply with quote

As with other Forum members, my first steel guitar was an 'MSA' from this era. Purchased it used and sold it after a few years when I ordered my first new guitar (Mullen D-10 pre-RP). The party to whom it was sold was still playing and earning money with it last I heard. "Built like a Sherman tank" is an apt description for these instruments.
View user's profile Send private message

Gene Tani


From:
Pac NW
Post  Posted 11 Jul 2019 5:52 am    
Reply with quote

Can you go try it, get lots of pix of undercarriage etc and serial number per https://bb.steelguitarforum.com/viewtopic.php?p=2220308

You can also look at *asking prices* of MSA's at 4sale forum here and at https://reverb.com/marketplace?query=msa%20pedal%20steel&show_only_sold=true
_________________
- keyless Sonny Jenkins laps stay in tune forever!; Carter PSG
- The secret sauce: polyester sweatpants to buff your picks, cheapo Presonus channel strip for preamp/EQ/compress/limiter, Diet Mountain Dew
View user's profile Send private message Send e-mail

Donny Hinson

 

From:
Glen Burnie, Md. U.S.A.
Post  Posted 11 Jul 2019 6:38 am    
Reply with quote

Mike Perlowin wrote:


Cons: Weighs as much as a Sherman tank. The undercarriage uses round cross rods, which make changing your setup much complicated and difficult. Newer steels have square crossrids, which make it much easier to work on the undercarriage.



IMHO, The MSA "Classic" guitars aren't all that difficult to work on. Yes, the disassembly required to make or add a change may require a few more steps, but that's just a little extra time. There's really nothing that I (or anyone with a little mechanical aptitude) would consider difficult or complicated about it.

Yeah, they're heavier than most, but that's usually only a problem for us old guys! Winking
View user's profile Send private message Send e-mail

Andy Henriksen

 

From:
Michigan, USA
Post  Posted 11 Jul 2019 7:29 am    
Reply with quote

Gene Tani wrote:
Can you go try it, get lots of pix of undercarriage etc and serial number per https://bb.steelguitarforum.com/viewtopic.php?p=2220308

You can also look at *asking prices* of MSA's at 4sale forum here and at https://reverb.com/marketplace?query=msa%20pedal%20steel&show_only_sold=true

Yeah, unfortunately it's nearly 2 hours from me, so when I go look at it (tomorrow morn) it will be with cash in pocket, and I'll have to make the call on the spot.
View user's profile Send private message Send e-mail

Andy Henriksen

 

From:
Michigan, USA
Post  Posted 11 Jul 2019 7:33 am    
Reply with quote

Mike Perlowin wrote:
This is not a "supersustain." It's an MSA. One of the best steel guitars on the market. This one appears to be from the very late 70s or early 80s.

Pros: Better than excellent quality. Built like a Sherman tank. Will last forever.

Cons: Weighs as much as a Sherman tank. The undercarriage uses round cross rods, which make changing your setup much complicated and difficult. Newer steels have square crossrids, which make it much easier to work on the undercarriage.

It's a great instrumernt, but 99% what you play will be on the E9 neck. Unless you plan to play C6, I'd say you should get a single neck.


I thought it was an MSA (make) Supersustain II (model), but maybe it's called something else. There are no pics of the front, so I'm not sure...

Anyway, I have played C6 lap steel for several years and right now, with my band, I end up playing E9 PSG on half my songs and a separate lap steel (in my lap) on half. I am thinking with the C6 neck, I'd be able to play everything on one guitar, which would be much more convenient - I'd be able to reach the volume pedal much better for one thing...
View user's profile Send private message Send e-mail

Mike Perlowin


From:
Los Angeles CA
Post  Posted 11 Jul 2019 8:47 am    
Reply with quote

Donny Hinson wrote:


IMHO, The MSA "Classic" guitars aren't all that difficult to work on. Yes, the disassembly required to make or add a change may require a few more steps, but that's just a little extra time. There's really nothing that I (or anyone with a little mechanical aptitude) would consider difficult or complicated about it.


Hi Donny, Actually, I think the Millennium is harder to work on than the old classic, because it's more complicated and the parts are so small. I can work on an old classic, but not on my Millies.
_________________
Please visit my web site and Soundcloud page and listen to the music posted there.
http://www.mikeperlowin.com http://soundcloud.com/mike-perlowin
View user's profile Send private message Send e-mail Visit poster's website

Gene Tani


From:
Pac NW
Post  Posted 11 Jul 2019 12:57 pm    
Reply with quote

I think the seller should be willing to send pix/serial # or talk about it over the phone. Ideally, also weight in case but not everybody has bathroom scales. If none of above, I would shy away when there's so many knowledgeable /conscientious sellers in the forum..

Andy Henriksen wrote:
Gene Tani wrote:
Can you go try it, get lots of pix of undercarriage etc and serial number per https://bb.steelguitarforum.com/viewtopic.php?p=2220308

You can also look at *asking prices* of MSA's at 4sale forum here and at https://reverb.com/marketplace?query=msa%20pedal%20steel&show_only_sold=true

Yeah, unfortunately it's nearly 2 hours from me, so when I go look at it (tomorrow morn) it will be with cash in pocket, and I'll have to make the call on the spot.

_________________
- keyless Sonny Jenkins laps stay in tune forever!; Carter PSG
- The secret sauce: polyester sweatpants to buff your picks, cheapo Presonus channel strip for preamp/EQ/compress/limiter, Diet Mountain Dew
View user's profile Send private message Send e-mail

Donny Hinson

 

From:
Glen Burnie, Md. U.S.A.
Post  Posted 11 Jul 2019 3:26 pm    
Reply with quote

Mike Perlowin wrote:


Hi Donny, Actually, I think the Millennium is harder to work on than the old classic, because it's more complicated and the parts are so small. I can work on an old classic, but not on my Millies.


You may have a point, Mike. Guitars should have either 2-piece pullers, or slotted pullers. But having slotted, 2-piece pullers is silly and overkill, IMHO. The bad thing about the 2-piece puller is that it normally adds another part to the works, the purpose of which is to hold the pin or rod in the puller. The old design pins did that just fine with the 4-hole pullers.

All designs have problems and issues. That's what goes with not having standardized parts on an instrument.
View user's profile Send private message Send e-mail

Andy Henriksen

 

From:
Michigan, USA
Post  Posted 12 Jul 2019 8:00 am    
Reply with quote

I passed on the MSA. To the right player/fixer, it is likely a great deal. He was willing to take $1000 for it, but what I found was that the left knees were way too far right to play the AB pedals without really contorting. I thought it looked that way in the pics, but was hoping it was just the camera angle or something. I have no idea why its set up that way. It seemed very weird.

Also, the Es were on the right, so I'd need to swap those around (I was hoping for a copedent very close to my other guitar). As I've never worked on ANY PSG, I wasn't up for any of this.

It did work, and seemed to sound nice, and just raking across the C6 neck made me even more excited about getting a D10. So the search continues.

Here's the ad. https://toledo.craigslist.org/msg/d/bryan-msa-dbl-neck-pedal-steel/6908894037.html

He was willing to take $1000 for it. He bought the thing years ago, gave up learning after a bit and packed it up. It was in a case for the last 8 years. Seemed to be in very good condition. No rust, etc. undercarriage looked pretty clean. No idea if he'd be willing to ship, but I suspect probably not.

And yeah, it weighed a ton.
View user's profile Send private message Send e-mail

Mike Perlowin


From:
Los Angeles CA
Post  Posted 12 Jul 2019 11:33 am    
Reply with quote

In my opinion, if you want to play C6, you should have bought it. $1,000 is a real bargain. And you can always have the copedant altered.

But as I previously said, 99% of the music you will play will be on the E9 neck, and unless you have your heart set on playing C6, you would be better off buying a single neck.
_________________
Please visit my web site and Soundcloud page and listen to the music posted there.
http://www.mikeperlowin.com http://soundcloud.com/mike-perlowin
View user's profile Send private message Send e-mail Visit poster's website

Leo Grassl


From:
Madison TN
Post  Posted 12 Jul 2019 1:39 pm    
Reply with quote

Andy Henriksen wrote:
Mike Perlowin wrote:
This is not a "supersustain." It's an MSA. One of the best steel guitars on the market. This one appears to be from the very late 70s or early 80s.

Pros: Better than excellent quality. Built like a Sherman tank. Will last forever.

Cons: Weighs as much as a Sherman tank. The undercarriage uses round cross rods, which make changing your setup much complicated and difficult. Newer steels have square crossrids, which make it much easier to work on the undercarriage.

It's a great instrumernt, but 99% what you play will be on the E9 neck. Unless you plan to play C6, I'd say you should get a single neck.


I thought it was an MSA (make) Supersustain II (model), but maybe it's called something else. There are no pics of the front, so I'm not sure...

Anyway, I have played C6 lap steel for several years and right now, with my band, I end up playing E9 PSG on half my songs and a separate lap steel (in my lap) on half. I am thinking with the C6 neck, I'd be able to play everything on one guitar, which would be much more convenient - I'd be able to reach the volume pedal much better for one thing...


Andy,

I would identify that MSA make as a "Vintage XL" or possibly a "Classic XL" both absolutely great guitars. I am a proud owner of a Vintage XL SD-10 myself. If the guitar works I wouldn't hesitate to buy it. They are solid in every way and mechanically far better than the guitar you already own. Below is a picture of my guitar



View user's profile Send private message Send e-mail

Chuck Miller

 

From:
Newton, Iowa, USA
Post  Posted 13 Jul 2019 11:01 am    
Reply with quote

Yep that looks like a well kept Classic XL D-10, a little newer than my 76 Classic. I believe MSA used to put the E's on the right usually back then, which means this a relativity unmolested guitar. Worth more than he is asking, IMO.
Chuck
View user's profile Send private message Send e-mail

Mike Perlowin


From:
Los Angeles CA
Post  Posted 13 Jul 2019 11:42 am    
Reply with quote

Chuck Miller wrote:
I believe MSA used to put the E's on the right usually back then...


For whatever it's worth, in 1979, when I bought the green MSA shown in my avatar the E raises and lowers were on the left. I don't know if that was the way they were all set up or not.

At one point I moved the E lowers to the RKL. After a while I moved them back to the LKR.

I played that guitar for 25 years, till I upgraded to a Millennium. It never let me down. I probably should have kept it.
_________________
Please visit my web site and Soundcloud page and listen to the music posted there.
http://www.mikeperlowin.com http://soundcloud.com/mike-perlowin
View user's profile Send private message Send e-mail Visit poster's website


All times are GMT - 8 Hours
Jump to:  

Our Online Catalog
Strings, CDs, instruction,
steel guitars & accessories

www.SteelGuitarShopper.com

Please review our Forum Rules and Policies

Steel Guitar Forum LLC
PO Box 237
Mount Horeb, WI 53572 USA


Click Here to Send a Donation

Email admin@steelguitarforum.com for technical support.


BIAB Styles
Ray Price Shuffles for
Band-in-a-Box

by Jim Baron
HTTP