The Steel Guitar Forum Store 

Post new topic Tone bar holding pad??
Reply to topic
Author Topic:  Tone bar holding pad??
Devon Teran


From:
Kansas City
Post  Posted 4 Jul 2019 10:26 am    
Reply with quote

I did some session work last October and the steel I was borrowing was an old Sho Bud S-10. It had a small felt pad for holding the tone bar. I just got a new ZumSteel Encore, and since there's no wrist pad, one of these little tone bar pads would be perfect. I'm wondering if anyone has seen these or if someone makes them now. The one on the steel I used was a nicer than how it would turn out if I tried to make one myself.
View user's profile Send private message Send e-mail

Brooks Montgomery


From:
Idaho, USA
Post  Posted 4 Jul 2019 11:32 am    
Reply with quote

I know there’s probably a good reason not to do this, but I haven’t discovered it yet. This works for me.


_________________
A banjo, like a pet monkey, seems like a good idea at first.
View user's profile Send private message Send e-mail

Dick Chapple Sr

 

From:
Hardin Montana, USA
Post  Posted 4 Jul 2019 12:03 pm     pad
Reply with quote

I have a Zum Encore also. I found the arm rest pad to be a little too low, so I just added two washers on the under side of the pad, used a tad longer screws to all together, now it works fine, and my bar doesn't roll off the guitar now as the arm rest is a touch higher now. A pad would still be nice though.
Happy Independence Day.
Dick
View user's profile Send private message Send e-mail

Eric Philippsen


From:
Central Indiana, USA
Post  Posted 4 Jul 2019 1:39 pm    
Reply with quote

I’ve been placing my bar on the keyhead for 40 years.
View user's profile Send private message Send e-mail

Devon Teran


From:
Kansas City
Post  Posted 5 Jul 2019 12:39 pm    
Reply with quote

I place my bar in the key head too. The pad was only about four inches long, so not like a wrist pad at all.

I just remembered I had a couple photos from that session. It was great fun. That steel was gorgeous. I hadn’t been playing much and I feel back in love with it. It’s why I’m playing a lot more right now.


View user's profile Send private message Send e-mail

Godfrey Arthur

 

From:
3rd Rock
Post  Posted 5 Jul 2019 6:21 pm    
Reply with quote

Thanks for posting that photo Brooks.

Never thought to park the bar up there. Smile

The pad looks like a nice idea as well Devon.

But I would end up knocking things off siting on the edge.
_________________
ShoBud The Pro 1
YES it's my REAL NAME!
Ezekiel 33:7
View user's profile Send private message

Stu Schulman


From:
Ulster Park New Yawk (deceased)
Post  Posted 6 Jul 2019 12:13 am    
Reply with quote

Keyhead here,unless it's an older MSA it will fall?
_________________
Steeltronics Z-pickup,Desert Rose S-10 4+5,Desert Rose Keyless S-10 3+5... Mullen G2 S-10 3+5,Telonics 206 pickups,Telonics volume pedal.,Blanton SD -10,Emmons GS_10...Zirctone bar,Bill Groner Bar...any amp that isn't broken.Steel Seat.Com seats...Licking paint chips off of Chinese Toys since 1952.
View user's profile Send private message Send e-mail

Brooks Montgomery


From:
Idaho, USA
Post  Posted 6 Jul 2019 10:23 am    
Reply with quote

Stu Schulman wrote:
Keyhead here,unless it's an older MSA it will fall?

Yep, old MSA’s keyheads have an open end steel to floor dispenser. Laughing
_________________
A banjo, like a pet monkey, seems like a good idea at first.
View user's profile Send private message Send e-mail

Barry Coker


From:
Bagley Alabama, USA
Post  Posted 6 Jul 2019 1:44 pm    
Reply with quote

My key head is open and the bar just slides out for a quick fix I used a piece of about 1" wide Velcro looped over itself (Smooth Felt out) and then raped it with a couple of smaller pieces to keep it together. Snug fit between my SD pad and neck stays put even in the case. You could do the same with a stick on piece just fold the adhesive side together along one edge to keep the bar from rolling.




_________________
Zum-D-10, Webb 614-E, 65 Pro Reverb, Evans RE200, 69 Gibson Birdland, 89 Telecaster EAD Bad!!
View user's profile Send private message Send e-mail

David Martin


From:
Kingsport, TN 37660 USA
Post  Posted 7 Jul 2019 3:09 pm    
Reply with quote

I've been putting my bar on the keyhead since 1982 when I was in Duane Marrs store and saw him do it. It makes sense ...that's what the bar does(lay on the strings)
_________________
SHO-BUD SUPER PRO D10(8+10)
EMMONS LL-III D10(9+9)
Too many Amps
View user's profile Send private message Send e-mail

Larry Robbins


From:
Fort Edward, New York
Post  Posted 7 Jul 2019 3:34 pm    
Reply with quote

Just a simple piece of fabric folded over and sewn. Girlfriend made it for me in about 5 minuets. works well to prevent scratches and help keep dust out from between neck and pad.Smile



_________________
Twang to the bone!
View user's profile Send private message Send e-mail

Bobby D. Jones

 

From:
West Virginia, USA
Post  Posted 7 Jul 2019 9:07 pm     Tone bar holding pad
Reply with quote

I have made a bar holder for 2 steels I have gigged, The first one was a MSA S10 On 3/4 body, The 2nd is on the GFI S12U I am playing now. The MSA had the 12 slot key head on a 10 string guitar. It gave me room to lay my steel bar and nylon Do-Bro bar end to end an ready to switch quick.

This is the pad and bar holder on my MSA S10. There is a lot of space along the tuner head to play with on many SD10 guitars.
View user's profile Send private message Send e-mail

Roger Crawford


From:
Griffin, GA USA
Post  Posted 8 Jul 2019 8:09 am    
Reply with quote

Or this!

View user's profile Send private message Send e-mail

Craig A Davidson


From:
Wisconsin Rapids, Wisconsin USA
Post  Posted 9 Jul 2019 6:49 am    
Reply with quote



Williams Guitars has these.[/img]
View user's profile Send private message Send e-mail Visit poster's website

Larry Allen


From:
Kapaa, Kauai,Hawaii
Post  Posted 9 Jul 2019 12:33 pm    
Reply with quote

Stix.

_________________
Excel steels & Peavey amps,Old Chevys & Motorcycles & Women on the Trashy Side
View user's profile Send private message Send e-mail

Tom Campbell

 

From:
Houston, Texas, USA
Post  Posted 9 Jul 2019 12:52 pm    
Reply with quote

Made from two PVC pipe end-caps and a electrical conduit clamp.

View user's profile Send private message Send e-mail


All times are GMT - 8 Hours
Jump to:  

Our Online Catalog
Strings, CDs, instruction,
steel guitars & accessories

www.SteelGuitarShopper.com

Please review our Forum Rules and Policies

Steel Guitar Forum LLC
PO Box 237
Mount Horeb, WI 53572 USA


Click Here to Send a Donation

Email admin@steelguitarforum.com for technical support.


BIAB Styles
Ray Price Shuffles for
Band-in-a-Box

by Jim Baron
HTTP