| Author |
Topic: Standel Studio 40 |
Remi Villeneuve
From:
Montreal
|
Posted 18 Mar 2019 12:23 pm |
|
Hello
Anybody have seen or heard or have any information on this amp.. ?
Any good for steel ?
Cheers
Remi |
|
|
|
Erv Niehaus
From:
Litchfield, MN, USA
|
Posted 18 Mar 2019 1:34 pm
|
|
Standel made an amp for ZB:
 |
|
|
|
Michael Lee Allen
From:
Portage Park / Irving Park, Chicago, Illinois
|
Posted 18 Mar 2019 2:47 pm
|
|
Standel S 40 is going to be 80 watts RMS output into 4 10" speakers. Weight is 53 pounds with standard Standel "S" speakers and the tall cabinet may make it a little top-heavy and a tip risk. The 10" speakers and lower wattage may not suit you for contemporary country playing or give you enough volume/headroom. For smaller venues, lower volumes, and a more retro traditional sound it should be fine. I have multiples of the S 15 with a single 15" and the S 24 with two 12' speakers. The chassis is the same.
MLA |
|
|
|
Michael Lee Allen
From:
Portage Park / Irving Park, Chicago, Illinois
|
Posted 18 Mar 2019 3:00 pm
|
|
 |
|
|
|
Remi Villeneuve
From:
Montreal
|
Posted 18 Mar 2019 3:04 pm
|
|
Hi
Thanx for the info.
On one side I can get a Studio 40 for around 100$ and on the other a JBL E140-8 for like 50$
It could be a good fit then...?
Cheers |
|
|
|
Michael Lee Allen
From:
Portage Park / Irving Park, Chicago, Illinois
|
Posted 18 Mar 2019 3:15 pm
|
|
Those are great bargains in USD$ or CAN$. You may like the amp with the original speakers, if not I would remove them and the baffle to save for reuse or resale, and then make a new baffle with the 15" speaker. Keeping everything original will always bring you more money if and when you ever sell it. Even if you can't make/install the new baffle/speaker yourself paying someone to to the job is no big deal considering the low prices you're getting both the amp and speaker for.
MLA |
|
|
|
Remi Villeneuve
From:
Montreal
|
Posted 18 Mar 2019 3:18 pm
|
|
 |
|
|
|
Michael Lee Allen
From:
Portage Park / Irving Park, Chicago, Illinois
|
Posted 19 Mar 2019 6:34 am
|
|
 |
|
|
|
