The Steel Guitar Forum Store 

Post new topic wiring for Maverick pickup
Reply to topic
Author Topic:  wiring for Maverick pickup
Fred Hedgecoth

 

From:
Virginia, USA
Post  Posted 16 Nov 2018 7:11 am    
Reply with quote

So the old Maverick was making a horrible hum/scratch noise so I took the pickup out for examination. Looks like someone had done a questionable repair on it so I'm trying to get it right. the black wire goes into the pickup coil and the red wire looks like it had been taped to the copper coil wire itself on the outside. Should the red wire be soldered to the coil or simply re-taped like I found it?
View user's profile Send private message Send e-mail

Tommy Mc


From:
Middlesex VT
Post  Posted 16 Nov 2018 8:58 am    
Reply with quote

Fred, a pickup is basically a long coil of wire wrapped around a magnet. The red lead should be soldered to one end of the coil, and the black to the other. It looks to me like your coil got damaged, so somebody just poked around with the end of the red wire until they got continuity, and taped it in place. I don't see any way that pickup is repairable, short of sending it out to be re-wound. You might consider just replacing it, used pickups are always popping up on the forum.
View user's profile Send private message Send e-mail

Michael Brebes

 

From:
Northridge CA
Post  Posted 16 Nov 2018 9:01 am    
Reply with quote

It's definitely time for a rewind on that pickup,
_________________
Michael Brebes
Instrument/amp/ pickup repair
MSA D10 Classic/Rickenbacher B6/
Dickerson MOTS/Dobro D32 Hawaiian/
Goldtone Paul Beard Reso

Mesa Boogie Studio Pre/Hafler 3000
RP1/MPX100
View user's profile Send private message Send e-mail

Fred Hedgecoth

 

From:
Virginia, USA
Post  Posted 17 Nov 2018 3:23 am    
Reply with quote

Thanks guys...I guess I'll be looking for a replacement.Any suggestions on what to look for?
_________________
In the beginning God created the heavens and the earth
View user's profile Send private message Send e-mail

Fred Hedgecoth

 

From:
Virginia, USA
Post  Posted 17 Nov 2018 4:03 am    
Reply with quote

Michael
About how much does a rewind cost?
_________________
In the beginning God created the heavens and the earth
View user's profile Send private message Send e-mail

Edward Rhea

 

From:
Medford Oklahoma, USA
Post  Posted 17 Nov 2018 5:31 am    
Reply with quote

Sorry Michael, I’ve edited this post not realizing you do pickup repair...until I read it in your signature? Embarassed
_________________
“TONESNOB”


Last edited by Edward Rhea on 17 Nov 2018 8:13 am; edited 1 time in total
View user's profile Send private message Send e-mail

Michael Brebes

 

From:
Northridge CA
Post  Posted 17 Nov 2018 7:18 am    
Reply with quote

Rewind is usually $50.
_________________
Michael Brebes
Instrument/amp/ pickup repair
MSA D10 Classic/Rickenbacher B6/
Dickerson MOTS/Dobro D32 Hawaiian/
Goldtone Paul Beard Reso

Mesa Boogie Studio Pre/Hafler 3000
RP1/MPX100
View user's profile Send private message Send e-mail

Fred Hedgecoth

 

From:
Virginia, USA
Post  Posted 17 Nov 2018 1:11 pm    
Reply with quote

Michael...sent a pm regarding a rewind.
_________________
In the beginning God created the heavens and the earth
View user's profile Send private message Send e-mail

Michael Brebes

 

From:
Northridge CA
Post  Posted 24 Nov 2018 4:29 pm    
Reply with quote

Pickup is rewound.



_________________
Michael Brebes
Instrument/amp/ pickup repair
MSA D10 Classic/Rickenbacher B6/
Dickerson MOTS/Dobro D32 Hawaiian/
Goldtone Paul Beard Reso

Mesa Boogie Studio Pre/Hafler 3000
RP1/MPX100
View user's profile Send private message Send e-mail


All times are GMT - 8 Hours
Jump to:  

Our Online Catalog
Strings, CDs, instruction,
steel guitars & accessories

www.SteelGuitarShopper.com

Please review our Forum Rules and Policies

Steel Guitar Forum LLC
PO Box 237
Mount Horeb, WI 53572 USA


Click Here to Send a Donation

Email admin@steelguitarforum.com for technical support.


BIAB Styles
Ray Price Shuffles for
Band-in-a-Box

by Jim Baron
HTTP