Author |
Topic: Bill Lawrence 705 Wide Mount Pickup W/Black Surround (Sold) |
Lynn Stafford
From: Ridgefield, WA USA
|
Posted 17 Oct 2018 2:49 pm
|
|
I had a pair of Bill Lawrence wide mount 705 pickups but I sold one of them. This is the newer one with the black surround. Lead is about 12" long.
$65.00, including USPS Priority shipping to the lower 48 states.
I can accept PayPal, USPS money order, or your personal check, if you're not in a hurry. _________________ Best regards,
Lynn Stafford
STEEL GUITAR WEST
http://www.steelguitarwest.com
Steel Guitar Technician (Restoration, Set-up, Service and Repair work)
Previous Emmons Authorized Dealer & Service Technician (original factory is now closed)
ZumSteel Authorized Service Technician
----------------------------------
Last edited by Lynn Stafford on 20 Oct 2018 8:06 am; edited 3 times in total |
|
|
|
Jack Goodson
From: new brockton,alabama (deceased)
|
Posted 17 Oct 2018 2:58 pm ?
|
|
lynn, are these the same reading as the ones with the red wire?....thanks jack |
|
|
|
Lynn Stafford
From: Ridgefield, WA USA
|
Posted 17 Oct 2018 3:07 pm Re: ?
|
|
Jack Goodson wrote: |
lynn, are these the same reading as the ones with the red wire?....thanks jack |
Jack,
They should be about the same. Mine measure about 20.4K Ohms. _________________ Best regards,
Lynn Stafford
STEEL GUITAR WEST
http://www.steelguitarwest.com
Steel Guitar Technician (Restoration, Set-up, Service and Repair work)
Previous Emmons Authorized Dealer & Service Technician (original factory is now closed)
ZumSteel Authorized Service Technician
---------------------------------- |
|
|
|
Jack Goodson
From: new brockton,alabama (deceased)
|
Posted 17 Oct 2018 3:32 pm ?
|
|
lunn, will these mount on an emmons pp without altering the guitar or the pickups? if so i will take them....thanks jack |
|
|
|
Lynn Stafford
From: Ridgefield, WA USA
|
Posted 17 Oct 2018 8:57 pm Pickup Height
|
|
Jack,
The 705 pickups are about 1/8" taller than a standard Emmons SC pickup. You might find it necessary to mount the pickup flush against the mounting plate (no spacers under the pickup). If so, you'll have to drill a hole for the lead in the middle of the plate. Otherwise, I doubt if you'll encounter any other issues installing these. _________________ Best regards,
Lynn Stafford
STEEL GUITAR WEST
http://www.steelguitarwest.com
Steel Guitar Technician (Restoration, Set-up, Service and Repair work)
Previous Emmons Authorized Dealer & Service Technician (original factory is now closed)
ZumSteel Authorized Service Technician
---------------------------------- |
|
|
|
Jack Goodson
From: new brockton,alabama (deceased)
|
Posted 18 Oct 2018 6:04 am pickups
|
|
lynn, i will pass, i really dont want to drill any extra holes. thanks for your time....jack |
|
|
|
Lynn Stafford
From: Ridgefield, WA USA
|
Posted 18 Oct 2018 3:18 pm Bill Lawrence 705 Wide Mount Pickup W/Black Surround
|
|
Thanks for your interest, Jack.
I decided to sell one of the pair to a Forumite in Washington state, so I now only have one to sell. _________________ Best regards,
Lynn Stafford
STEEL GUITAR WEST
http://www.steelguitarwest.com
Steel Guitar Technician (Restoration, Set-up, Service and Repair work)
Previous Emmons Authorized Dealer & Service Technician (original factory is now closed)
ZumSteel Authorized Service Technician
---------------------------------- |
|
|
|
Lynn Stafford
From: Ridgefield, WA USA
|
Posted 20 Oct 2018 8:09 am Bill Lawrence 705 Wide Mount Pickup Is Sold
|
|
Both pickups have now been sold.
b0b, please close. _________________ Best regards,
Lynn Stafford
STEEL GUITAR WEST
http://www.steelguitarwest.com
Steel Guitar Technician (Restoration, Set-up, Service and Repair work)
Previous Emmons Authorized Dealer & Service Technician (original factory is now closed)
ZumSteel Authorized Service Technician
---------------------------------- |
|
|
|