Author |
Topic: Carter?? |
Dave Seddon
From: Leicester, England.
|
Posted 9 Sep 2018 10:14 pm
|
|
Can someone tell me the distance between the centre of the changer shaft and the end of the guitar body(not including the end plate). Thanks. |
|
|
|
Dan Robinson
From: Colorado, USA
|
Posted 10 Sep 2018 8:04 pm
|
|
Dave,
As close as I can measure it's about 1.533".
|
|
|
|
Dave Seddon
From: Leicester, England.
|
Posted 10 Sep 2018 10:09 pm
|
|
Thanks Dan very much appreciated. |
|
|
|
Dan Robinson
From: Colorado, USA
|
Posted 13 Sep 2018 7:14 pm
|
|
I had to eyeball the center of the changer axle. It's closer to the center than it appears in the photo. But still, measurement were not made against trued edges. Hope it's close enough for your purpose. |
|
|
|
John Sluszny
From: Brussels, Belgium
|
Posted 14 Sep 2018 10:39 am
|
|
Dan Robinson wrote: |
Hope it's close enough for your purpose. |
Just curious, what's your purpose ? Thanks ! |
|
|
|
Don Kuhn
From: Poetry/Terrell ,Texas, USA
|
Posted 17 Sep 2018 8:06 pm
|
|
Not to change the subject but Dan what is that Tuner program your using on the phone. |
|
|
|
Dan Robinson
From: Colorado, USA
|
Posted 18 Sep 2018 7:29 pm
|
|
Don Kuhn wrote: |
Not to change the subject but Dan what is that Tuner program your using on the phone. |
PitchLab Pro (Android). It supports custom offsets. I use two (Newman Open, Newman Pedals). Cable from my volume pedal's tuner-out to this retired phone (airplane mode). It works great. |
|
|
|
Don Kuhn
From: Poetry/Terrell ,Texas, USA
|
Posted 18 Sep 2018 9:32 pm
|
|
Dan thanks for the response and I just happen to have a old phone. |
|
|
|