| Author |
Topic: Nashville 400 cabinet size |
George Kimery
From:
Limestone, TN, USA
|
Posted 1 Aug 2018 8:43 am |
|
I am wondering if a Tuki cover for a Nashville 400 will fit a speaker cabinet I built. They look about the same size. Please, need Nashville 400 dimensions.
Thanks |
|
|
|
Mike Kowalik
From:
San Antonio,Texas
|
Posted 1 Aug 2018 10:41 am Nash 400 dimensions....
|
|
| 20.25 high x 20.125 wide x 11.0 deep ( measured at bottom of amp ).... |
|
|
|
Bill A. Moore
From:
Silver City, New Mexico, USA
|
Posted 1 Aug 2018 11:47 am
|
|
George, Mike can build you a custom cover, and he's really easy to work with. (And not very expensive!)
I have several!
http://www.ampcoversonline.com/ |
|
|
|
George Kimery
From:
Limestone, TN, USA
|
Posted 1 Aug 2018 5:35 pm Nashville 400 cabinet size
|
|
Thanks Mike and Bill.
Looks like a Nashville 400 cover should work. My cabinet is 19.5" x 19.5" x 11" . It has the thick plastic corners, so when you include them, it measures 20" x 20". I have made my own covers all my !ife, but they can't compare to the thick padded covers, plus I am retired and too lazy to make my own anymore. |
|
|
|
Bill A. Moore
From:
Silver City, New Mexico, USA
|
Posted 2 Aug 2018 6:41 am
|
|
I put my "Twin" clone in a Mojo cabinet. Found a Fender Twin cover cheap, it hangs off of it like a hand me down suit!
(I still use it!) |
|
|
|
John Swain
From:
Winchester, Va
|
Posted 3 Aug 2018 5:49 am
|
|
| George, someone should point out that the Nashville 400 tapers to 9 1/2" at the top. A stock cover may only go part way on your amp! FWIW |
|
|
|
George Kimery
From:
Limestone, TN, USA
|
Posted 3 Aug 2018 6:02 am Nashville 400 cabinet size
|
|
John, you have saved me a big headache. I didn't know about the taper. Tuki states on their website that custom sizes are available at no extra charge, so I will go that route.
Thanks so much for the info.
George
PS: Still using the soft cases for my steel that you pointed me to. I have my D-10 Zum down to 36# now. |
|
|
|
Larry Moore
From:
Hampton, Ga. USA
|
Posted 10 Aug 2018 3:35 pm NV-400 Cabinet
|
|
George Not high jacking this post ,but John Builds a very good looking NV-400 Cabinet & it is lite weight also.
Larry |
|
|
|
George Kimery
From:
Limestone, TN, USA
|
Posted 10 Aug 2018 7:18 pm Nashville 400 cabinet size
|
|
Larfy, thanks for the info, but when I need a cabinet, I make my own.
 |
|
|
|
