| Author |
Topic: TC Electronics Helix noise |
b0b
From:
Cloverdale, CA, USA
|
Posted 16 Jul 2018 4:18 pm |
|
The TCE Helix is advertised as "True Bypass", but I get a low volume, high pitched whine out of it when it's turned off. If I remove it from the effects loop, the whine goes away.
Anyone else experiencing noise from the new crop of TCE "Toneprint" pedals?
_________________
-𝕓𝕆𝕓- (admin) - Robert P. Lee - Recordings - Breathe - D6th - Video |
|
|
|
Mitchell Smithey
From:
Dallas, USA
|
Posted 19 Jul 2018 2:13 pm
|
|
| Bob, I'm using both the Flashback 2 and the Hall of Fame 2 toneprint pedals and they are both dead quiet. |
|
|
|
Keith Hilton
From:
248 Laurel Road Ozark, Missouri 65721
|
Posted 19 Jul 2018 4:58 pm
|
|
| Bob, try it in a different location in the signal chain. |
|
|
|
Jon Light
From:
Saugerties, NY
|
Posted 19 Jul 2018 5:05 pm
|
|
| I had a digital pedal (drawing a blank on what it was) that gave off an electronic whine when turned off. It introduced electronic interference into the other pedals sharing the power supply daisy chain. |
|
|
|
Donny Hinson
From:
Glen Burnie, Md. U.S.A.
|
Posted 19 Jul 2018 9:07 pm
|
|
| Have you tried the unit with a different amp, with different cords, or in a different location? |
|
|
|
b0b
From:
Cloverdale, CA, USA
|
Posted 19 Jul 2018 10:40 pm
|
|
| Jon Light wrote: |
| I had a digital pedal (drawing a blank on what it was) that gave off an electronic whine when turned off. It introduced electronic interference into the other pedals sharing the power supply daisy chain. |
That might be what's happening here. I moved it to a different position in the pedal board and the noise got quieter.
It's not loud enough to be noticed on stage, but it would be awful in a recording studio.
_________________
-𝕓𝕆𝕓- (admin) - Robert P. Lee - Recordings - Breathe - D6th - Video |
|
|
|
