| Author |
Topic: How Do I Re-glue The Chrome Strip on The Front Apron? |
Chris Schlotzhauer
From:
Colleyville, Tx. USA
|
Posted 10 Jul 2018 6:42 am |
|
Could I solicit some tips how to re-glue this chrome strip.
I don't want to make a mess
Thanks!
 |
|
|
|
Jim Palenscar
From:
Oceanside, Calif, USA
|
Posted 10 Jul 2018 6:59 am
|
|
| Apply contact cement to both surfaces masking off the guitar- wait 5 min and adhere the strip to the guitar. Remove the masking tape and wipe off the excess cement- I usually use a titch of lacquer thinner if it's a mica guitar or just rub a bit if it's a lacquer guitar. |
|
|
|
Chris Schlotzhauer
From:
Colleyville, Tx. USA
|
Posted 10 Jul 2018 9:07 am
|
|
| Jim Palenscar wrote: |
| Apply contact cement to both surfaces masking off the guitar- wait 5 min and adhere the strip to the guitar. Remove the masking tape and wipe off the excess cement- I usually use a titch of lacquer thinner if it's a mica guitar or just rub a bit if it's a lacquer guitar. |
wouldn't I have to completely remove the strip to do that?
also, contact cement is a one-shot deal....don't place it perfectly, and it's ruined....right? |
|
|
|
Henry Matthews
From:
Texarkana, Ark USA
|
Posted 11 Jul 2018 12:57 pm
|
|
Chris, you would have to remove the strip to do that which is really best way to fix. But, if the strip is just loose like in your pic, I use gorilla glue. Put some glue on a thin piece of cardboard like a business card or something. Work the glue around to get good coverage and either clamp it or with that glue, you can just hold it for 5 minutes or so and it bonds. I would only do this method if the strip will fit back in perfect.
Don’t get the glue on the mica either.
_________________
Henry Matthews
D-10 Magnum, 8 &5, dark rose color
D-10 1974 Emmons cut tail, fat back,rosewood, 8&5
Nashville 112 amp, Fishman Loudbox Performer amp, Hilton pedal, Goodrich pedal,BJS bar, Kyser picks, Live steel Strings. No effects, doodads or stomp boxes. |
|
|
|
Mike Wilson
From:
Mansfield, Ohio, USA
|
Posted 12 Jul 2018 9:53 am
|
|
| If you end up taking the whole strip off make sure you clean all the glue from bothe surfaces so that it will lay back on squarely and lay evevenly. |
|
|
|
Butch Mullen
From:
North Carolina, USA 28681
|
Posted 12 Jul 2018 3:49 pm
|
|
| Anybody tried double sided tape? More forgiving than contact cement. |
|
|
|
