| Author |
Topic: Wanted: Push/Pull Mechanic in Texas to Change E9 Copedent |
Jim Cooley
From:
The 'Ville, Texas, USA
|
Posted 8 Jul 2018 10:41 am |
|
I recently bought a Bryan Adams built, 1970 D10 push/pull with 8 pedals and 7 knee levers. I've had it long enough to know it's a keeper. I'm looking for good push/pull mechanic within reasonable driving distance of north central Texas to change the E9 knee levers copedent, and make sure the guitar is properly adjusted. The pedals are fine as is. The C6 copedent is no big deal. This steel plays very well, and I want to maintain that. Of course if we can improve playability, that's great too. I have an open mind and am willing to listen to suggestions.
"Reasonable" driving distance is a relative term, depending upon the mechanic's location, and availability. I will not ship this steel, and am willing to travel the extra miles in order to have the job done right. I'm not asking for a freeebe. I'll pay a reasonable price depending on the work required. I prefer Forum email for initial contact. PM is ok too.
Last edited by Jim Cooley on 9 Jul 2018 6:36 am; edited 1 time in total |
|
|
|
Ricky Davis
From:
Bertram, Texas USA
|
|
|
|
Jim Cooley
From:
The 'Ville, Texas, USA
|
Posted 9 Jul 2018 6:38 am
|
|
| Ricky - Stephenville, about an hour southwest of Ft. Worth. |
|
|
|
Ricky Davis
From:
Bertram, Texas USA
|
|
|
|
Jim Cooley
From:
The 'Ville, Texas, USA
|
Posted 9 Jul 2018 9:48 am
|
|
Ricky - I emailed Mr. Holden. Thanks for the suggestion.
I knew that about your wife, but forgot until your reply, above. You set up an LDG for me one time; great guitar, you did great work.
Thanks,
-jim- |
|
|
|
Lee Baucum
From:
McAllen, Texas (Extreme South) The Final Frontier
|
Posted 9 Jul 2018 11:21 am
|
|
| Rick Price is a good push/pull mechanic; but, he is in the hill country out west of San Antonio. |
|
|
|
Ricky Davis
From:
Bertram, Texas USA
|
Posted 9 Jul 2018 1:04 pm
|
|
Thanks Jim; but I lost a lot of memory with my brain injury....but since you cued my memory about my work on your LDG...I kinda remember now you live in Stephenville; but couldn't pull it up with 'Ville by your name.
Also; doesn't Steve Lamb in Ft. worth work on push-pulls..or can suggest who can/does up there??
http://lambsmusic.com/steel-guitar/
Good luck bro.
Ricky
_________________
Ricky Davis
Email Ricky: sshawaiian2362@gmail.com |
|
|
|
J R Rose
From:
Keota, Oklahoma, USA
|
Posted 9 Jul 2018 3:57 pm
|
|
I think Ricky is correct about Steve Lamb. But if you could catch Gary Carpenter at the right time he could fix you up. J.R.
_________________
NOTHING..Sold it all. J.R. Rose |
|
|
|
Jim Cooley
From:
The 'Ville, Texas, USA
|
Posted 17 Jul 2018 7:35 pm
|
|
| I've tried to contact C.E. Holden and Gary Carpenter; no replies from either. I haven't had any luck with contact information for Rick Price. I would gladly drive to the San Antonio area, even farther for quality work. Thanks for the suggestions. |
|
|
|
Per Berner
From:
Skövde, Sweden
|
Posted 18 Jul 2018 2:05 am
|
|
| Isn't Jim Flynn in Texas? I bet he could do whatever you need done. |
|
|
|
Danny Letz
From:
Old Glory,Texas, USA 79540
|
Posted 18 Jul 2018 4:03 am
|
|
| Jim, I will strongly recommend Rick Price. When he was traveling with Jake Hooker I caught him playing in Abilene to take him my guitar & then caught him later in Snyder to get it back. Each of those were one hour drives for me & got to hear good music too. PM or Email me & I ‘ll give you contact info, |
|
|
|
Lee Baucum
From:
McAllen, Texas (Extreme South) The Final Frontier
|
Posted 18 Jul 2018 5:10 am
|
|
| Jim Cooley wrote: |
| I've tried to contact C.E. Holden and Gary Carpenter; no replies from either. I haven't had any luck with contact information for Rick Price. I would gladly drive to the San Antonio area, even farther for quality work. Thanks for the suggestions. |
Jim - Shoot me a PM with your email address and telephone number. I'll contact Rick and see if he would want to do the work.
Lee |
|
|
|
Bobby Hearn
From:
Henrietta, Tx
|
Posted 18 Jul 2018 6:02 am
|
|
| Rick Price is the man. I just had him change a couple lever positions and get rid of a bunch that it didn't need and it is the best playing push pull iv'e ever played. Also have another one at his shop getn right. I highly recommend Rick Price. |
|
|
|
Jim Cooley
From:
The 'Ville, Texas, USA
|
Posted 14 Aug 2018 2:18 pm
|
|
| I can provide Rick's contact information to those needing P/P assistance. |
|
|
|
