| Author |
Topic: Match Box 7A |
Jim Goins
From:
Michigan, USA
|
Posted 17 Apr 2018 3:54 pm |
|
Could I please get some advice about a Goodrich 7A matchbox, just received it today, never used one before, it has an on-off switch, I know it is to disconnect the battery, if I turn the switch off I get no signal at all, is this normal? I have a Session 400, Emmons SD 10 push pull, a Boss DD3 pedal, a Goodrich 120 volume pedal. How should I use these to gather. Thanks in advance. Jim Goins.  |
|
|
|
Tony Prior
From:
Charlotte NC
|
Posted 18 Apr 2018 2:08 am
|
|
It uses TWO batteries, and yes the switch turns it off. Make sure the two 9V batteries are fresh.
This is how I use it,
Steel > Matchbox > Volume Pedal > AMP , in this manner the signal going to the MB is consistent and not controlled by the V Pedal.
I find it to be a reasonably nice unit, easy to adjust EQ and GAIN as you are playing. But I don't like anything that requires batteries with no option of a Power Supply .
I'm thinking about using the " no battery required " connectors , I think they are 3 or 4 bucks each from the big outlets.
_________________
Emmons L-II , Fender Telecasters, B-Benders
Pro Tools 12 on WIN 7 !
jobless- but not homeless- now retired 9 years
CURRENT MUSIC TRACKS AT > https://tprior2241.wixsite.com/website |
|
|
|
Jim Goins
From:
Michigan, USA
|
Posted 18 Apr 2018 3:58 am match box
|
|
| Thanks Tony. I use a Boss DD3 delay pedal, wondered if anyone used a DD3 behind the match box? I wonder why Goodrich didn't give the option of a power supply? I assume it would be, 18 volts, thus two 9 volt batteries. Jim Goins. |
|
|
|
Nicholas Scott
From:
Norfolk, VA USA
|
Posted 18 Apr 2018 4:30 am
|
|
| I use Steel - 7A Matchbox - DD-3 - Volume Pedal - Amp. Sounds fine to me. |
|
|
|
Erv Niehaus
From:
Litchfield, MN, USA
|
Posted 18 Apr 2018 8:04 am
|
|
| There really isn't any need for a wall wart, the batteries last forever. |
|
|
|
