Author |
Topic: Volume pedal control question |
Ken Thompson
From: Great Falls, Montana, USA
|
Posted 25 Aug 2005 7:28 am
|
|
I have an older Goodwrich pot pedal. We run everything through our board. I am told that I have very little distance between full volume and no volume making it very difficult to be tastefull with fills.
Is it the pedal? My pre-gain? Would it be beneficial to purchase the Hilton pedal (that I am saving for) or is it a sound board issue? |
|
|
|
Donny Hinson
From: Glen Burnie, Md. U.S.A.
|
Posted 25 Aug 2005 7:40 am
|
|
Most likely, it's too much gain on the board. There's a slim chance that you pedal isn't working corectly, but that can be verified by pluging into an amp instead of the board. If it works fine with an amp, the trouble has to be in the board (how it's set). |
|
|
|
Nic du Toit
From: Milnerton, Cape, South Africa
|
Posted 26 Aug 2005 6:51 am
|
|
Ken,
Does the pot work with a string? (cord)
Check whether the pot is fully open when the pedal is down, and vice versa. Although, in the backed off position the pot won't be 'closed', only your output volume would have been reduced by about 50% or so. Sometimes the cord starts to 'creep' on the shaft of the pot, causing the pot to open or close only partially.
------------------
Nic du Toit
1970 Rosewood P/P Emmons D10 Fatback 8x4
Peavey Session 500 unmodfied
My CD "Nightmare on Emmons Steel"
Click here to E-mail us.
|
|
|
|