| Author |
Topic: B to Bd lower on string 9 with U-12 |
Len Amaral
From:
Rehoboth,MA 02769
|
Posted 9 Feb 2018 7:00 pm |
|
| My Williams U-12 has a vertical that lowers string 5 B to Bd. I want to add the 9th string B to Bd. What lower hole for the rod on the changer will have the least resistance? It’s a triple lower changer. |
|
|
|
Jim Palenscar
From:
Oceanside, Calif, USA
|
Posted 10 Feb 2018 7:42 am
|
|
| The lower hole furthest from the changer axle |
|
|
|
Lee Baucum
From:
McAllen, Texas (Extreme South) The Final Frontier
|
Posted 10 Feb 2018 8:17 am
|
|
That will mess up the voicing of chords that need the 5th string lower only, on the B6 side of the tuning.
_________________
Lee, from South Texas - Down On The Rio Grande
There are only two options as I see it.
Either I'm right, or there is a sinister conspiracy to conceal the fact that I'm right.
Williams Keyless S-10, BMI S-10, Evans FET-500LV, Fender Steel King, 2 Roland Cube 80XL's,
Sarno FreeLoader, Goodrich Passive Volume Pedals, Vintage ACE Pack-A-Seat |
|
|
|
Pete Burak
From:
Portland, OR USA
|
Posted 10 Feb 2018 9:22 am
|
|
It is easy to re-tune that change when you need it for B6.
Nice to have when you want it for E9. |
|
|
|
Len Amaral
From:
Rehoboth,MA 02769
|
Posted 10 Feb 2018 10:58 am
|
|
I have 2 vericle lever for the X lever. The right vertical is to the right over pedals 5-6-7 and only the 5th string B to Bd is engaged.
The other vertical to the left is over pedals 1-2-3 and currently moves 5th string B to Bd and I want to add the 9th string Too much tension on a vertical will lift the guitar. |
|
|
|
