| Author |
Topic: split tuning on c string. |
James Winwood
From:
New York, New York
|
Posted 26 Mar 2002 9:31 am |
|
Once again, I turn to the forum...
I can't seem to get a tunable split on my 3rd string (C) on my c6th neck. This would be achieved by using pedal 7 and the 1/2 step lwr knee, giving me a c#. When I engage pedal 7 and then hit my knee lever, it lowers to right between c# and D. I can't get it to tune to C# and still have my B with just the knee lvr. If I tune this change, then when I engage the knee without pedal 7, it drops below a B. I think this is possible on my guitar, I just don't know how to go about getting it. I already see many uses for this change, and would like to save newer knee levers for other changes. Any help or related experiences would be greatly appreciated. I play a Mullen royal precision. |
|
|
|
Pete Burak
From:
Portland, OR USA
|
Posted 26 Mar 2002 9:50 am
|
|
I would call/email Mullen directly and find out how to operate their split tuning feature.
Typically there is a tuner right at the changer finger for string 5 that is used to accomplish this. |
|
|
|
Buck Reid
From:
Nashville,TN
|
Posted 26 Mar 2002 10:03 am
|
|
James,
try using the split tuner screw to tune the half step lower on the knee lever first. Then engage the 7th pedal and lever and tune the split(C#) with the nylon tuner you would normally use to tune the 3rd string lower. Hope this helps! |
|
|
|
Al Marcus
From:
Cedar Springs,MI USA (deceased)
|
Posted 26 Mar 2002 10:53 am
|
|
Sorry-Mullen does not have split tuners installed as Emmons does. Carter doesn't either....al  [This message was edited by Al Marcus on 26 March 2002 at 10:55 AM.] |
|
|
|
Larry Clark
From:
Herndon, VA.
|
|
|
|
Buck Reid
From:
Nashville,TN
|
Posted 27 Mar 2002 5:05 am
|
|
Sorry James,thought they had split tuners.  [This message was edited by Buck Reid on 27 March 2002 at 05:05 AM.] |
|
|
|
James Winwood
From:
New York, New York
|
Posted 27 Mar 2002 7:27 am
|
|
| Wish I had a split tuner on this thing. Oh well. I'm going to call mullen guitars and talk to them about this. I wonder why this wasn't put into the guitar in the first place. Thanks for the help though guys. |
|
|
|
C Dixon
From:
Duluth, GA USA
|
Posted 27 Mar 2002 7:47 am
|
|
James,
Simply add a second rod to your lower bellcrank on the C to B pull. Put it through a raise hole.
Now tune the normal lower tuner for the split note. That is, with pedal 7 AND the C to B lever engaged tune the split note (C#) with the "lower" tuner.
Then, engage just the C to B lever and tune the "raise" rod (that you installed) so the B note is in tune.
God bless you with your attempts,
carl |
|
|
|
