Search found 536 matches

Acquired this awesome Mullen today! Special thanks to Johnny Boyd for taking the time to help me and working with me to make the deal happen. He was very patient and gave me time to really check out t ...

If the guitar was functioning correctly and then began to have this issue, you were likely correct in your initial post. Something is binding.

I have tried several suggestions but I have found that Armor All does the best job for me. Spray it on a rag and wipe in on then use a soft cloth to polish it off. YMMV

I put a 15k Clay Alden pickup in mine and it’s great. Check out his site he has several different windings available.

Tips I remember from working on mine. 1. Screw the barrel to the half way point and then slide it next to the puller and tighten the set screw. That gives the most in or out adjustment for tuning. 2. ...

Also it is not a conversion. There was never a d 10 ldg.

In my option the 74 is the better built machine. I have a 74 Pro I that has the same barrel and 2 hole pull mechanics as the LDG you are looking at. They are a little temperamental with tuning as the ...

Also, never oil the barrels. They are meant to be dry. They should have resistance when turning.

The reason I asked about the body width is my bolt is a 10 1/4 inch body width. Same as the wrap around but has a D serial number.

When did the body size change take place?

I grew up playing music with a guy that always played Emmons bolt on push pull guitars. I have owned several steels and they just never lived up to what I wanted or sounded as good to me as the bolt o ...

I had this same issue on the G2 I used to have. Unfortunately the only way to have both of these changes working is to add a pull rod to pull the the string back up to the split note. The split tuning ...

Stage One (sold)
Mullen G2 (traded)
74 Sho Bud Pro 1 (still have)
67 Emmons Bolt (still have)

You could cut a slot in it with a Dremel tool then try a flat head screwdriver.

https://bb.steelguitarforum.com/userpix2203/11519_11D2D28B8ED64969A61677E2B327E0D5_1.jpg

I looked at my changer on my push pull which also has the whole tone raise on the first string and mine is not misaligned that way. So I think there is definitely an issue.

And there you have it. Advice from someone who definitely knows what they are talking about. Cool!

https://bb.steelguitarforum.com/userpix2203/11519_6EC0487D8355459A8B436F1A075CCD5D_1.jpg

That hook should be in one of those holes. One of the push pull experts may know which one. If not just try ...

Not sure of the year, but looks like a student model Zumsteel which eventually evolved into what is now the Stage One built by Doug Earnest.

I have owned 4 steels in my life and still have two of them. I started on a stage one, bought a 74 Sho-Bud pro 1, then a Mullen G2, and lastly, a 67 bolt on. The ShoBud is my second favorite and the p ...

Yes, those red ones shouldn’t be turned, but they also shouldn’t lose their settings if not turned so unless you messed with them that shouldn’t be the problem. If you did not use the exact stri ...

A little cleaning, replace the fret board, fix the A pedal issue(it’s probably something simple) and play the crap out of it. I’ve seen some real bad buds brought back to life. Yours is in relativ ...

If you are looking for the proper front decal the Emmons Guitar Company could probably assist with that.

My Mullen did that too. Unfortunately I think that just happens especially with thinner rods. They flex with pressure and vibrate when released. That’s why some guitar makers put foam blocks under t ...

Eric I’ll take it. Let me know how to pay. Thanks.

Author	Message
Topic: New guitar day!
Jason Putnam Replies: 2 Views: 537	Forum Section: Pedal Steel Posted: 11 Mar 2024 1:43 pm Subject: New guitar day!
Jason Putnam Replies: 2 Views: 537	Acquired this awesome Mullen today! Special thanks to Johnny Boyd for taking the time to help me and working with me to make the deal happen. He was very patient and gave me time to really check out t ...
Topic: Marlen Pull Release E Lever Tuning Problem
Jason Putnam Replies: 14 Views: 1635	Forum Section: Pedal Steel Posted: 26 Jan 2024 2:57 pm Subject: Marlen Pull Release E Lever Tuning Problem
Jason Putnam Replies: 14 Views: 1635	If the guitar was functioning correctly and then began to have this issue, you were likely correct in your initial post. Something is binding.
Topic: Cleaning Laminate
Jason Putnam Replies: 4 Views: 968	Forum Section: Pedal Steel Posted: 13 Dec 2023 1:26 pm Subject: Cleaning Laminate
Jason Putnam Replies: 4 Views: 968	I have tried several suggestions but I have found that Armor All does the best job for me. Spray it on a rag and wipe in on then use a soft cloth to polish it off. YMMV
Topic: Pickups on 1973 Emmons Push Pull
Jason Putnam Replies: 8 Views: 1933	Forum Section: Pedal Steel Posted: 5 Oct 2023 5:32 pm Subject: Pickups on 1973 Emmons Push Pull
Jason Putnam Replies: 8 Views: 1933	I put a 15k Clay Alden pickup in mine and it’s great. Check out his site he has several different windings available.
Topic: Shobud barrels behind pullers
Jason Putnam Replies: 7 Views: 939	Forum Section: Pedal Steel Posted: 18 Sep 2023 11:33 am Subject: Shobud barrels behind pullers
Jason Putnam Replies: 7 Views: 939	Tips I remember from working on mine. 1. Screw the barrel to the half way point and then slide it next to the puller and tighten the set screw. That gives the most in or out adjustment for tuning. 2. ...
Topic: Need Purchasing Help on Sho-Bud LDG
Jason Putnam Replies: 18 Views: 2338	Forum Section: Pedal Steel Posted: 15 Sep 2023 12:14 pm Subject: Need Purchasing Help on Sho-Bud LDG
Jason Putnam Replies: 18 Views: 2338	Also it is not a conversion. There was never a d 10 ldg.
Topic: Need Purchasing Help on Sho-Bud LDG
Jason Putnam Replies: 18 Views: 2338	Forum Section: Pedal Steel Posted: 15 Sep 2023 12:13 pm Subject: Need Purchasing Help on Sho-Bud LDG
Jason Putnam Replies: 18 Views: 2338	In my option the 74 is the better built machine. I have a 74 Pro I that has the same barrel and 2 hole pull mechanics as the LDG you are looking at. They are a little temperamental with tuning as the ...
Topic: Help with Sho Bud barrel issue
Jason Putnam Replies: 4 Views: 619	Forum Section: Pedal Steel Posted: 4 Sep 2023 5:51 pm Subject: Help with Sho Bud barrel issue
Jason Putnam Replies: 4 Views: 619	Also, never oil the barrels. They are meant to be dry. They should have resistance when turning.
Topic: Emmons push pull
Jason Putnam Replies: 15 Views: 1762	Forum Section: Pedal Steel Posted: 4 Aug 2023 6:25 am Subject: Emmons push pull
Jason Putnam Replies: 15 Views: 1762	The reason I asked about the body width is my bolt is a 10 1/4 inch body width. Same as the wrap around but has a D serial number.
Topic: Emmons push pull
Jason Putnam Replies: 15 Views: 1762	Forum Section: Pedal Steel Posted: 3 Aug 2023 9:20 am Subject: Body size
Jason Putnam Replies: 15 Views: 1762	When did the body size change take place?
Topic: How did you decide?
Jason Putnam Replies: 27 Views: 3635	Forum Section: Pedal Steel Posted: 3 Aug 2023 7:15 am Subject: How did you decide?
Jason Putnam Replies: 27 Views: 3635	I grew up playing music with a guy that always played Emmons bolt on push pull guitars. I have owned several steels and they just never lived up to what I wanted or sounded as good to me as the bolt o ...
Topic: A pedal and LKV split, and then the Franklin pedal problem
Jason Putnam Replies: 7 Views: 752	Forum Section: Pedal Steel Posted: 13 Jun 2023 8:35 am Subject: A pedal and LKV split, and then the Franklin pedal problem
Jason Putnam Replies: 7 Views: 752	I had this same issue on the G2 I used to have. Unfortunately the only way to have both of these changes working is to add a pull rod to pull the the string back up to the split note. The split tuning ...
Topic: List all the Pedal Steels you have owned
Jason Putnam Replies: 154 Views: 49055	Forum Section: Pedal Steel Posted: 13 Apr 2023 1:00 pm Subject: List all the Pedal Steels you have owned
Jason Putnam Replies: 154 Views: 49055	Stage One (sold) Mullen G2 (traded) 74 Sho Bud Pro 1 (still have) 67 Emmons Bolt (still have)
Topic: Broken Emmons
Jason Putnam Replies: 10 Views: 2775	Forum Section: Pedal Steel Posted: 7 Apr 2023 7:07 pm Subject: Broken Emmons
Jason Putnam Replies: 10 Views: 2775	You could cut a slot in it with a Dremel tool then try a flat head screwdriver.
Topic: For The EMMONS LOVERS ( Lets see your Guitar)
Jason Putnam Replies: 389 Views: 253770	Forum Section: Pedal Steel Posted: 15 Jan 2023 10:36 am Subject: 1967 Bolt On
Jason Putnam Replies: 389 Views: 253770	https://bb.steelguitarforum.com/userpix2203/11519_11D2D28B8ED64969A61677E2B327E0D5_1.jpg
Topic: Changer finger out of place after string change on PP
Jason Putnam Replies: 18 Views: 2362	Forum Section: Pedal Steel Posted: 14 Dec 2022 9:34 am Subject: Changer finger out of place after string change on PP
Jason Putnam Replies: 18 Views: 2362	I looked at my changer on my push pull which also has the whole tone raise on the first string and mine is not misaligned that way. So I think there is definitely an issue.
Topic: Changer finger out of place after string change on PP
Jason Putnam Replies: 18 Views: 2362	Forum Section: Pedal Steel Posted: 12 Dec 2022 12:31 pm Subject: Changer finger out of place after string change on PP
Jason Putnam Replies: 18 Views: 2362	And there you have it. Advice from someone who definitely knows what they are talking about. Cool!
Topic: Changer finger out of place after string change on PP
Jason Putnam Replies: 18 Views: 2362	Forum Section: Pedal Steel Posted: 12 Dec 2022 11:25 am Subject: Changer finger out of place after string change on PP
Jason Putnam Replies: 18 Views: 2362	https://bb.steelguitarforum.com/userpix2203/11519_6EC0487D8355459A8B436F1A075CCD5D_1.jpg That hook should be in one of those holes. One of the push pull experts may know which one. If not just try ...
Topic: ZumSteel
Jason Putnam Replies: 10 Views: 2380	Forum Section: Pedal Steel Posted: 14 Oct 2022 6:12 pm Subject: ZumSteel
Jason Putnam Replies: 10 Views: 2380	Not sure of the year, but looks like a student model Zumsteel which eventually evolved into what is now the Stage One built by Doug Earnest.
Topic: The guitar tone by itself
Jason Putnam Replies: 38 Views: 6447	Forum Section: Steel Players Posted: 6 Oct 2022 4:32 am Subject: The guitar tone by itself
Jason Putnam Replies: 38 Views: 6447	I have owned 4 steels in my life and still have two of them. I started on a stage one, bought a 74 Sho-Bud pro 1, then a Mullen G2, and lastly, a 67 bolt on. The ShoBud is my second favorite and the p ...
Topic: Trying to get my LR pedal (for strings 4 & 8) to tune to D#
Jason Putnam Replies: 3 Views: 781	Forum Section: Pedal Steel Posted: 5 Oct 2022 6:00 am Subject: Trying to get my LR pedal (for strings 4 & 8) to tune to D#
Jason Putnam Replies: 3 Views: 781	Yes, those red ones shouldn’t be turned, but they also shouldn’t lose their settings if not turned so unless you messed with them that shouldn’t be the problem. If you did not use the exact stri ...
Topic: Newb just bought a Sho-Bud
Jason Putnam Replies: 22 Views: 1998	Forum Section: Pedal Steel Posted: 24 Sep 2022 10:37 am Subject: Newb just bought a Sho-Bud
Jason Putnam Replies: 22 Views: 1998	A little cleaning, replace the fret board, fix the A pedal issue(it’s probably something simple) and play the crap out of it. I’ve seen some real bad buds brought back to life. Yours is in relativ ...
Topic: Need a hi-res version of the Emmons logo for a restoration
Jason Putnam Replies: 4 Views: 907	Forum Section: Pedal Steel Posted: 18 Sep 2022 8:39 am Subject: Need a hi-res version of the Emmons logo for a restoration
Jason Putnam Replies: 4 Views: 907	If you are looking for the proper front decal the Emmons Guitar Company could probably assist with that.
Topic: 3rd string pull rod rattling when pedal's released
Jason Putnam Replies: 7 Views: 870	Forum Section: Pedal Steel Posted: 31 Aug 2022 6:52 pm Subject: 3rd string pull rod rattling when pedal's released
Jason Putnam Replies: 7 Views: 870	My Mullen did that too. Unfortunately I think that just happens especially with thinner rods. They flex with pressure and vibrate when released. That’s why some guitar makers put foam blocks under t ...
Topic: SOLD Steelers Choice Pro 1 w/sidekick - $150 plus shipping
Jason Putnam Replies: 1 Views: 917	Forum Section: For Sale: Amps and Accessories Posted: 17 Mar 2022 12:59 pm Subject: SOLD Steelers Choice Pro 1 w/sidekick - $150 plus shipping
Jason Putnam Replies: 1 Views: 917	Eric I’ll take it. Let me know how to pay. Thanks.