Author |
Topic: To Mike Brown |
Terry Sneed
From: Arkansas,
|
Posted 12 Nov 2004 8:24 am
|
|
Mike I took the reverb tank out and checked the wires. none were broken. I cleaned the post with a small wire brush and contact cleaner, put it back in and the reverb still won't work. now it buzzes when I turn the reverb on. do you think it's the tank, or could it be somethin else. thanks
Terry
------------------
Zum D10 /8x5 / session 400
steelin for my Lord
|
|
|
|
Mike Brown
From: Meridian, Mississippi USA
|
Posted 12 Nov 2004 8:57 am
|
|
I discussed your problem with one of our techs and he recommends that you change the reverb pan. When you begin to resolder wires within the reverb pan, it's time to just change the pan. Peavey part #71011114-$48.33 from the factory. However, you may order this pan from any authorized Peavey dealer.
Mike Brown
Peavey Electronics Corporation |
|
|
|
Terry Sneed
From: Arkansas,
|
Posted 12 Nov 2004 9:48 am
|
|
Thanks Mike. I'll just order it from the phone # you gave me. our local Peavey dealer seems to forget to order my picks, strings and other stuff.
Terry
------------------
Zum D10 /8x5 / session 400
steelin for my Lord
|
|
|
|