Author |
Topic: Headphones on a session 500 |
gary darr
From: Somewhere out in Texas
|
Posted 4 Oct 2000 3:24 pm
|
|
When using headphones out of the headphone jack I noticed the amp's speaker remains on .Is it safe to reherse with the speaker un-plugged or should there be some type of dummy load plugged in ?
------------------
sho-bud,session 500,american standard strat,shecter tele,peavy classic 50
|
|
|
|
Donny Hinson
From: Glen Burnie, Md. U.S.A.
|
Posted 4 Oct 2000 6:51 pm
|
|
I recommend that if you use "HI-FI" headphones, you be very careful. These headphones (which seal with cushions that go all the way around the ear) can feed enormous amounts of sound to the ear. A simple short in the amp, or a dirty pot MIGHT leave you with permanent ear damage. Keep the master volume LOW, and that way you won't have a permanent "ring" in your ears from something as simple as a bad cord. An even better idea is to keep the earphones slightly off the ear...just in case! |
|
|
|
Mike Brown
From: Meridian, Mississippi USA
|
Posted 5 Oct 2000 5:23 am
|
|
I do suggest that you do not allow the "hot" speaker cable touch any metal piece on the amp. Taping the metal part of the plug might not be a bad idea. |
|
|
|