My first gig - adjustments

LeRoy Sawyer · From: Walton, NY 13856

I have been asked by a local Praise and Worship band to join them in a couple of weeks.
Since this is my first gig I have no idea what adjustments I will need to make to my delay and reverb to go with the room we will be playing in, and here will not be a lot of time to make adjustments. It is an old church sanctuary that is fan shaped and the calling is 2-3 stories high.
I use a TRANS-TUBE FEX into a Nashville 400

Thank you for your help
Roy

I Steel Stuff

[This message was edited by LeRoy Sawyer on 15 September 2000 at 12:15 PM.]

Jack Stoner · From: Kansas City, MO

Leroy, just use my main program. It will work for almost anywhere. With the steel alone the delay sounds like it's too much but when with the band it is just right.

If you don't have the program, the listing is on my site. http://home.earthlink.net/~jestoner

David Pennybaker · From: Conroe, TX USA

Doug Beaumier · From: Northampton, MA

Hi Roy,

I agree with B Cole. In a church with a high ceiling there will be plenty of natural reverb... probably too much.

I'd use minimal amp reverb and no delay.

Have a great time!

dougb

------------------
www.dougbsteel.com

Jack Stoner · From: Kansas City, MO

The amp settings y'all give won't do him any good. He is using a Transtube Fex, for the preamp/effects not the amp's EQ and reverb. When you use a unit, such as the Transtube Fex, you run it directly to the power amp in on the back of the amp (if you use the Transtube Fex as just an effect unit and run it through the amp eq you have wasted your money and could have bought a less expensive unit to do that).

Forum Index > Electronics		Next oldest topic :: Next newest topic

All times are GMT - 8 Hours	Jump to: