| Author |
Topic: Mod Kits for Nashville 400 |
rpetersen
From:
Iowa
|
Posted 3 Apr 2000 12:28 pm |
|
I've been away from steel for a while - I have a Nashiville 400 coming my way - What is the mod kit, How many $, what does it do and can it be put on at home??
Thanx.....Ron
------------------
Ron Petersen |
|
|
|
Mark Herrick
From:
Bakersfield, CA
|
|
|
|
rpetersen
From:
Iowa
|
Posted 3 Apr 2000 2:29 pm
|
|
Thanx mark - That pretty well answered all my questions!!
------------------
Ron Petersen |
|
|
|
Lee Baucum
From:
McAllen, Texas (Extreme South) The Final Frontier
|
Posted 3 Apr 2000 6:28 pm
|
|
I just had one installed in my old 1983 Nashville 400. It really improved the overall sound of the amp. I noticed that I had to move the shift knob from 800 back to the straight-up position. Killer tone, but still not quite as good as my old Evans FET-500 LV (large cabinet).
I'm no good at soldering, so I did all the mechanical tear-down stuff. The instructions are real easy to follow. Then I took the board to a tech friend of mine to swap out the parts. After I got it back from the tech I reassembled everything.
The kit was $99 and the tech charged me $25. It was well worth the money.
Lee, from South Texas
|
|
|
|
Mike Brown
From:
Meridian, Mississippi USA
|
Posted 4 Apr 2000 8:55 am
|
|
Hello Ron,
Our Nashville 400 "tone enhancement" kits cost is $21.31 for the parts and $2.50 for the schematic diagram. The parts kit comes with a list of parts that need to be swapped out. There are no circuit modifications in our kit or the Miracle kit. That's the reason we say that it is a "tone enhancement" instead of a "mod".
If you send your amp chassis to us here at the factory, the parts and labor charges are less than $55.00, plus freight. I can be contacted toll free at 1-877-732-8391 to discuss my first hand experiences with this particular kit. |
|
|
|
