The Steel Guitar Forum Store 

Post new topic 2nd input
Reply to topic
Author Topic:  2nd input
Joe Delaronde

 

From:
Selkirk, Manitoba, Canada
Post  Posted 4 Mar 2000 10:23 pm    
Reply with quote

I have an old Kustom Sidewinder amp which has 2 inputs. One high and 1 low. What's the low input used for?
Joe

[This message was edited by Joe Delaronde on 04 March 2000 at 10:25 PM.]

View user's profile Send private message

Jack Stoner


From:
Kansas City, MO
Post  Posted 5 Mar 2000 3:19 am    
Reply with quote

Generally, amps with a "high" and "low" have high or normal gain on one input and on the low gain the input level is reduced slightly. In those cases you can use the "low" if you're overdriving the input.
View user's profile Send private message Send e-mail

Rich Paton

 

From:
Santa Maria, CA.,
Post  Posted 5 Mar 2000 5:52 am    
Reply with quote

Jack, it's typically a 6db difference. It's often useful & easily modded if necessary.
View user's profile Send private message

Joe Delaronde

 

From:
Selkirk, Manitoba, Canada
Post  Posted 5 Mar 2000 10:09 am    
Reply with quote

Fellas, what would be an example of overdriving my amp??????
Joe
View user's profile Send private message

Paul Stertz

 

From:
Pittsburgh,Pa. USA
Post  Posted 5 Mar 2000 5:27 pm    
Reply with quote

Rich, the way the two inputs work on a Nashville 400 is this. The two inputs have a 10db difference when used separately. Input 1 would be the higher gain input of course. When both inputs are used simultaneously, the gains of the two inputs are equal. I can't speak for other amps, but that is how the Nashvilles work.
View user's profile Send private message Send e-mail Visit poster's website

John Lacey

 

From:
Black Diamond, Alberta, Canada
Post  Posted 6 Mar 2000 7:49 am    
Reply with quote

Joe, if you're pickup was too hot or if you were using a preamp that had a hot signal and you detected distortion, then you might want to run into you're second input. I use the second input of my Evans having run from my vol. pedal to my GX-700 preamp to the Evans. I could turn down the preamp, but it's good to get the hottest signal into the preamp and therefore to the amp.
View user's profile Send private message Send e-mail

Paul Stertz

 

From:
Pittsburgh,Pa. USA
Post  Posted 6 Mar 2000 7:59 am    
Reply with quote

You are correct, John. You definitely want to use the hottest signal you can without distortion. This allows you to get well above the noise floor of the amp, resulting in a much cleaner sound. An amp WILL amplify noise as well as the audio signal.

------------------
Paul Stertz
Blue laq. Mullen D10 8+5
Blue laq. Yamaha 302S

View user's profile Send private message Send e-mail Visit poster's website


All times are GMT - 8 Hours
Jump to:  

Our Online Catalog
Strings, CDs, instruction,
steel guitars & accessories

www.SteelGuitarShopper.com

Please review our Forum Rules and Policies

Steel Guitar Forum LLC
PO Box 237
Mount Horeb, WI 53572 USA


Click Here to Send a Donation

Email admin@steelguitarforum.com for technical support.


BIAB Styles
Ray Price Shuffles for
Band-in-a-Box

by Jim Baron
HTTP