maple 36" x 8" x 1"

Brian Henry · Posted 5 Sep 2004 9:59 pm

I am looking for a piece of hard maple 36" x 8" x 1"

Ron ! · Posted 6 Sep 2004 12:01 am

TB

Maybe you can e-mail this guy and ask him if he's got something layin' around. http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&category=621&item=3745815041&rd=1

If you want to make yourself a keyless this might be just what you are looking for.I asume that you need the wood for a selfbuild PSG.

The reason why i don't order this myself is because i live overseas and the costs are to high getting it here.

Ron

[This message was edited by Ronald Steenwijk on 06 September 2004 at 01:02 AM.]

Bill Moore · From: Manchester, Michigan

Here is a link to a lumber search page: http://www.wdfindr.com/ You can probably find a source near you.

Per Berner · From: SkÃ¶vde, Sweden

You could try glueing together two electric bass neck blanks from Stewart-McDonald.
That would give you exactly the size you're after at a reasonable cost. Stew-Mac are super nice to deal with, 110% professional, and the quality of their products is among the very best.
http://www.stewmac.com

Luthiers Mercantile International might also have something.
http://www.lmii.com

[This message was edited by Per Berner on 07 September 2004 at 04:51 AM.]

Paul Warnik · From: Illinois,USA

Most all of the specialty wood suppliers in our area only have boards (with quality looking grain) in 3/4" thickness and at most 6" width-the length is not a problem-Good luck in your search

Mark Ardito · From: Chicago, IL, USA

I do a lot of wood working and I have known a bunch of instrument builders use this place for ALL of their supply.
http://www.nwtimber.com/

Good Luck!

Mark Ardito

------------------
Sho~Bud Pro I, Fender D-8 (C6&E13) http://www.darkmagneto.com

Forum Index > Wanted To Buy		Next oldest topic :: Next newest topic

All times are GMT - 8 Hours	Jump to: