Best single 12” speaker

Payton Vermeesch · From: Santa Cruz California

Looking for some buying advice from folks who’ve tried a lot of em.. I’m planning on running a single 12” speaker in my twin reverb. 4ohm, 150+ watts. Neodymium or Ceramic. Any brands/models y’all prefer? Any input would be greatly appreciated! Thanks

Steve Lipsey · From: Portland, Oregon, USA

Been through a LOT of speakers over the years...Just got the one Tim Marcus recommends (Milkman Amps)- this last decade I've been using whatever Tim likes, starting with the Telonics NEOs, recently the Jupiter Ceramic, and now the Hybrid JBL....he says "Be careful, once you get used to it, you won't be able to go back..."

The notes seem to physically jump from the instrument...tight bass, crystalline highs...never heard anything like it...I've always wondered what the "JBL thing" was...now I know...

Hybrid JBL D-120 from Missing Link Audio.
https://www.mlapedals.com/store/The-HYBRID-JBL-D120-or-K120-p268027069
The site says that they all are 8 ohm, but I seem to remember reading somewhere that they will do 4 ohm on request...

And of course, it sounds batter in a Milkman Amp...currently playing the Pedal Steel Mini, recently greatly upgraded...circuit mods, Jupiter caps, Soursound Transformer, power has gotten a lot stronger...Tim says if is the best amp he's ever offered...
_________________
www.facebook.com/swingaliband & a few more....
Williams S10s, Milkman Pedal Steel Mini & "The Amp"
Ben Bonham Resos, 1954 Oahu Diana, 1936 Oahu Parlor

Chris Willingham · From: Tulsa, Oklahoma

That looks quite intriguing, Steve. What's the weight on the hybrid D120?
_________________
Fiddle, banjo and steel for Tennessee Jet, Blaine Bailey

2021 MSA Legend XL Signature S10 5X6 brown burst
Beard Josh Swift Sig, the purple one
Lap King Rodeo
p2p Bad Dawg 1x12, Quilter TT12 and a bunch of fiddles

Steve Lipsey · From: Portland, Oregon, USA

Weight...well, now you've asked the right question! Great tone isn't weightless...
They have a number of versions, depending on whether the D120 recone kit goes into a Black Widow or JBL frame...
I got the Black Widow version which is 10 lbs. lighter...1x12 in a Milkman cab is about 32 lbs.
Look at the website for more details, and give them a call at 706-693-0008...they are happy to chat about the whole story. I found the conversation useful...
https://www.mlapedals.com/store/The-HYBRID-JBL-D120-or-K120-p268027069
_________________
www.facebook.com/swingaliband & a few more....
Williams S10s, Milkman Pedal Steel Mini & "The Amp"
Ben Bonham Resos, 1954 Oahu Diana, 1936 Oahu Parlor

Payton Vermeesch · From: Santa Cruz California

Thanks Steve! I know people have been using JBLs in fender amps forever, but wouldn’t using a single 100 watt speaker be underpowered for the 82 watt output of a Twin?

Nikolai Shveitser · From: Louisiana, USA

I had fun running my twin into a single EVM 12L at home. Haven't tried it on a gig though. Not sure how many 4 ohm EVM12L's there are out there. Or if it would really save any weight lol!

Steve Lipsey · From: Portland, Oregon, USA

Payton-
Talk to them. I think I read somewhere that the K120 is higher wattage. And I don't know how conservative the ratings are.
Talk to them, they are very willing to chat...
_________________
www.facebook.com/swingaliband & a few more....
Williams S10s, Milkman Pedal Steel Mini & "The Amp"
Ben Bonham Resos, 1954 Oahu Diana, 1936 Oahu Parlor

Mike Fried · From: Nashville, TN, USA

Bob Hoffnar · From: Austin, Tx

I use 12’s and my favorite is a JBL D120. I also like the new hybrid JBL cone on a black widow. Really great sounding. The other one I’m into is a beyma liberty.

Right now I’m checking out a new neo that Tim Marcus is into. It’s real close. Sounds very very good. They should be on the market soon.
_________________
Bob

Steve Lipsey · From: Portland, Oregon, USA

Well, actually, any of the speakers that Tim has used in Milkman amps are pretty great...the Jupiter Ceramic and the Hybrid D120 are his current "go-tos" but he is always looking at what is out there. I liked the old Telonics NEO I had in my Milkman a decade ago, I'm sure the newer ones are better...

My point with this post is that ALL of these choices are quite good, and audiences will never hear the difference...I haven't had my Jupiter and Hybrid cabs in the same room yet, but listened to separately I'm completely happy with both of them...

Tim says that the Hybrid has definitely crisper bottoms and more sparkling highs, but that the increased definition is something that some folks might not really want - he told me to play mine for a while before thinking about upgrading my Jupiter cab, to be sure I wanted what it gives...
_________________
www.facebook.com/swingaliband & a few more....
Williams S10s, Milkman Pedal Steel Mini & "The Amp"
Ben Bonham Resos, 1954 Oahu Diana, 1936 Oahu Parlor

Jerry Overstreet · From: Louisville Ky

Seems everybody wants flyweight stuff these days, but you can't beat the conventional mag speakers such as the K120 or the BWs for moderate to high powered handling drivers.

BW 1203-4 or -8....BW 1201-8 from the 80s, early 90s era. Later ones are no good for guitar. They are sound reinforcement speakers, so selection is a must.

These early BWs handle at least 250 watts of power, have a beautiful voice, clean, great clarity but heavy, yes. Around 17#.

Haven't had the opportunity to try the hybrids but I bet they do sound great. I know our forum brother Jeff Maxwell does these and I know from personal experience that he does a fine job at reconing.

FWiW, I have a 1201-8 listed in the classifieds. I have a roomful of these old BW speakers....beat everything else I've tried.

Jeffrey Maxwell · From: Amarillo, Texas, USA

Thanks for the mention Jerry.
I do quite a bit of reconing of speakers for Steel Guitar use.
Mostly JBL D130 K130 D120. and some 2220A or 2220B modded to K130 specs.
I have been doing the "Hybrid" JBL/Black Widow modification for a while now
and have lots of really good comments about the sound of them. I usually put the
JBL K-series cones in the 1201 or 1501 black widow.

Jeff

Payton Vermeesch · From: Santa Cruz California

Thanks for all the input you guys, this is great information! It seems like there's a few great options in this thread alone. Jerry, do you have any 4 ohm BW's for sale?

Jerry Overstreet · From: Louisville Ky

Sorry Peyton, I don't have any 4 ohm speakers I can part with. The 1201-8 is the only one I can give up presently.

Michael Brebes · From: Northridge CA

The EVM12L speakers sound great. A Twin should work fine with the 8 ohm load of the one speaker. They can handle at least 200 watts so there shouldn't be any problem there.
_________________
Michael Brebes
Instrument/amp/ pickup repair
MSA D10 Classic/Rickenbacher B6/
Dickerson MOTS/Dobro D32 Hawaiian/
Goldtone Paul Beard Reso

Mesa Boogie Studio Pre/Hafler 3000
RP1/MPX100

Curt Langston · Posted 26 May 2024 8:47 am **Telonics**

Is Telonics still offering the 12 inch 4 ohm NEO?
Does anybody know an estimated price?

Bob Carlucci · From: Candor, New York, USA

,,,

_________________
I'm over the hill and hittin'rocks on the way down!

no gear list for me.. you don't have the time......

Lee Rider · From: Fort Bragg, California, USA

The Altec 417 gets my vote.....
_________________
StringBender Musical Instruments selling Gene Parson's StringBender products

Curt Langston · Posted 26 May 2024 6:54 pm **Telonics**

Are the Telonic 12 inch 4 ohm speakers still available?

gary pierce · From: Rossville TN

http://www.telonics.com/products/proaudio/support.php#pickups

Curt Langston · Posted 27 May 2024 5:56 am **Telonics**

Yes, I did find that.
Thanks Gary.

Forum Index > Electronics		Next oldest topic :: Next newest topic