| Author |
Topic: Custom Fretboard Decals |
Nicholas Thomas
From:
St. John's, Newfoundland, Canada
|
Posted 28 Feb 2022 2:36 pm |
|
Who makes custom fretboard decals? I usually use Carter starter fretboards but I want to start using my own design for my guitars from now on! I use a 24" scale, the width at the nut is 2 11/16" and the width towards the changer end is 3 1/4".
_________________
Guitar Built by me! |
|
|
|
J D Sauser
From:
Wellington, Florida
|
Posted 2 Mar 2022 5:03 am
|
|
Jim Palenscar at Steel Guitars Of North County (California) made me some on metal, custom.
... J-D.
_________________
__________________________________________________________
Was it JFK who said: Ask Not What TAB Can Do For You - Rather Ask Yourself "What Would B.B. King Do?"
A Little Mental Health Warning:
Tablature KILLS SKILLS.
The uses of Tablature is addictive and has been linked to reduced musical fertility.
Those who produce Tablature did never use it.
I say it humorously, but I mean it. |
|
|
|
Nicholas Thomas
From:
St. John's, Newfoundland, Canada
|
Posted 2 Mar 2022 7:52 am
|
|
Thank you so much! I'll send him a message!
_________________
Guitar Built by me! |
|
|
|
John Sims
From:
Ft. Lauderdale, FL
|
Posted 2 Mar 2022 9:55 am
|
|
Check this thread out:
https://bb.steelguitarforum.com/viewtopic.php?t=374301&highlight=decals
_________________
Regards,
John
Steelin' is a way of life!
1997 Carter U-12 Double Body-Natural Birdseye Maple-8p/5k, Peavey Nashville 1000 Amp, Goodrich L10K Vol. Pedal, Boss DD-3 Delay, Boss CE-5 Chorus, Behringer UMC-204HD Audio Interface, AKAI MPK Mini MK3 Professional Midi Keyboard/Controller, Gretsch Bobtail Resonator, Fender Banjo, Rondo SX Lap Steel (C6), DIY Lap Steel (Open D), a few Mojo Hand Cigar Box Guitars (MojoHandGuitars.com). |
|
|
|
Bobby D. Jones
From:
West Virginia, USA
|
Posted 5 Mar 2022 10:53 pm
|
|
When I built a steel about 1970. Could not find fretboards.
Here is what I used. I cut thin plexi-glass to fit neck and laid it on a fret board, Used masking tape. Laid out diamonds for markers. Then sprayed it with white, then taped the edges and sprayed black, All paint was done on the bottom so the plexi-glass protected the paint. They have been around for 50+ years and still look good.
You could use what ever for fret markers under the plastic. |
|
|
|
Jesse Valdez
From:
Fiddletown, California, USA
|
Posted 9 Mar 2022 7:31 pm
|
|
Really like that keyhead Bobby, it being symmetrical makes my mind happy.
_________________
Steel Guitar Slinger w/ The Malpass Brothers |
|
|
|
