The Steel Guitar Forum Store 

Post new topic Nut and Bridge Adjustments on a GeorgeBoard Double Neck
Reply to topic
Author Topic:  Nut and Bridge Adjustments on a GeorgeBoard Double Neck
Brennick Langston

 

From:
Utah, USA
Post  Posted 21 Oct 2017 4:54 am    
Reply with quote

I have a 8-string double neck from georgeboards and the nut and bridge string slots do not match my current string sets. The string sets are the C13 and B11 sets from John Pearse. The problem is that the bass strings stick up, are higher sitting, then the other strings. The tone bar catches on the strings, and it extremely annoying. Is there a way to adjust the string slots? Both the nut and bridge are metal with preset slots. I'd even swap them out for a bone nut and bridge if I could find somewhere that would make me a custom set. Any suggestions are welcome. Thanks!
View user's profile Send private message Send e-mail

Jack Hanson


From:
San Luis Valley, USA
Post  Posted 21 Oct 2017 6:05 am     Re: Nut and Bridge Adjustments on a GeorgeBoard Double Neck
Reply with quote

Brennick Langston wrote:
Any suggestions are welcome.
1) Obtain the properly gauged nut files and have at it. Stew-Mac is one source:

http://www.stewmac.com/Luthier_Tools/Tools_by_Job/Tools_for_Nuts_and_Saddles/Double-edge_Nut_Files.html

2) Find a reputable luthier in your area and bring that person your instrument with complete sets of properly gauged strings for each neck.

3) Or wait for George's reply and do what he suggests.
View user's profile Send private message Send e-mail

John Culp

 

From:
Tennessee, USA
Post  Posted 21 Oct 2017 11:21 am    
Reply with quote

Nuts should be filed to fit the sort of string gauges you use. Too loose isn't good, and too tight makes the strings sit too high. It can also bind the strings when tuning.
View user's profile Send private message Send e-mail

John Culp

 

From:
Tennessee, USA
Post  Posted 21 Oct 2017 11:23 am    
Reply with quote

Since I tend to like heavy strings, I have fixed too tight nuts by "sawing" the strings I want to use back and forth in the nut slots by hand till they fit. Regular round wound strings make very effective nut files.
View user's profile Send private message Send e-mail

John Culp

 

From:
Tennessee, USA
Post  Posted 22 Oct 2017 7:51 pm    
Reply with quote

I should say that I've "filed" my nuts with strings only using plastic or bone nuts. If you have a metal nut, you'll have to spring for the nut files.
View user's profile Send private message Send e-mail

George Piburn


From:
The Land of Enchantment New Mexico
Post  Posted 23 Oct 2017 7:36 am     Responding to Jack's Response
Reply with quote

Quote:
3) Or wait for George's reply and do what he suggests.


If the Butt End of your bar is hanging up on the low strings, you need to check into Operator Error.

I know of No Circumstances where pushing the Butt of the Tone Bar far enough outward and returning at an downward angle great enough to catch any string constitutes good playing hand technique.

Hopefully other teachers will add to this aspect of consideration.
_________________
GeorgeBoards S8 Non Pedal Steel Guitar Instruments
Maker of One of a Kind Works of Art that play music too.
Instructional DVDs
YouTube Channel
View user's profile Send private message Send e-mail Visit poster's website

Erv Niehaus


From:
Litchfield, MN, USA
Post  Posted 23 Oct 2017 7:58 am    
Reply with quote

George,
I agree with your assessment. Very Happy
View user's profile Send private message Send e-mail

Larry Carlson


From:
My Computer
Post  Posted 23 Oct 2017 8:22 am    
Reply with quote

I use this.
It's a welder's tip file set.
I've used them on plastic, bone, aluminum and even a steel nut.
They have at least a dozen files and I can always find a match for any string gauge.
For $5 I can't complain.



_________________
I have stuff.
I try to make music with it.
Sometimes it works.
Sometimes it doesn't.
But I keep on trying.
View user's profile Send private message

Fred Treece


From:
California, USA
Post  Posted 23 Oct 2017 10:57 am    
Reply with quote

Your tone bar should be slightly rounded on the butt end, which should minimize the difficulty you are having.

Get a good grip on the bar and lift the butt end slightly as you pull back toward the bass strings, just enough to clear the top of the strings.

That .060 guage low B on the B11 neck probably does sit a little high in a slot designed for .048. As a last resort, you might want to file away at that one just a touch. Or change your tuning and go with lighter strings.
View user's profile Send private message Send e-mail

Robert Allen

 

From:
Tennessee, USA
Post  Posted 23 Oct 2017 5:18 pm     Re: Responding to Jack's Response
Reply with quote

George Piburn wrote:
If the Butt End of your bar is hanging up on the low strings, you need to check into Operator Error.


Then I guess I'm guilty of operator error. I find it irritating if some strings are higher or lower than others so I file the nuts on my instruments so the tops of all the strings are at the same height. I have the Stew-Mac file set but it's not economically feasible for doing just one nut. Before I bought the Stew-Mac set I had a jeweler's set from the 99 cent store. One file is round and gradually tapered so different string widths can be filed by using different positions on the file.

Bob Allen, Melbert guitars
View user's profile Send private message Send e-mail Visit poster's website

Jack Hanson


From:
San Luis Valley, USA
Post  Posted 23 Oct 2017 6:17 pm    
Reply with quote

Fred Treece wrote:
Your tone bar should be slightly rounded on the butt end, which should minimize the difficulty you are having.
Agreed. The sharp butt end on the Sho-Bud bars from the '70s were disqualifiers for me.
View user's profile Send private message Send e-mail

John Culp

 

From:
Tennessee, USA
Post  Posted 26 Oct 2017 2:49 pm    
Reply with quote

Larry Carlson wrote:
I use this.
It's a welder's tip file set.
I've used them on plastic, bone, aluminum and even a steel nut.
They have at least a dozen files and I can always find a match for any string gauge.
For $5 I can't complain.




Thanks for the tip!
View user's profile Send private message Send e-mail


All times are GMT - 8 Hours
Jump to:  

Our Online Catalog
Strings, CDs, instruction,
steel guitars & accessories

www.SteelGuitarShopper.com

Please review our Forum Rules and Policies

Steel Guitar Forum LLC
PO Box 237
Mount Horeb, WI 53572 USA


Click Here to Send a Donation

Email admin@steelguitarforum.com for technical support.


BIAB Styles
Ray Price Shuffles for
Band-in-a-Box

by Jim Baron
HTTP