| Author |
Topic: Peavey 400 gain settings |
Tommy Boswell
From:
Virginia, USA
|
Posted 12 Jun 2017 7:24 am |
|
For those of you with Peavey 400 amps (Nashville or equivalent), where do you set your gain knobs? Pre and Post?
I know that Post needs to be higher than Pre. Just wondering about changes in tone with different settings. |
|
|
|
David Nugent
From:
Gum Spring, Va.
|
Posted 12 Jun 2017 8:31 am
|
|
| I normally run mine with 'Post Gain' at near full volume. The stage volume I regulate with the 'Pre Gain' setting. |
|
|
|
Lane Gray
From:
Topeka, KS
|
Posted 12 Jun 2017 6:51 pm
|
|
Indeed. Post/master dimed.
I usually run the pre about 4 or 5,and adjust volumes with my foot.
_________________
2 pedal steels, a lapStrat, and an 8-string Dobro (and 3 ukes)
More amps than guitars, and not many effects |
|
|
|
Mike Brown
From:
Meridian, Mississippi USA
|
Posted 13 Jun 2017 1:25 pm Nashville 400 gain controls
|
|
| The pre gain send should be set at a lower level than the post gain. The post gain sends the signal to the input of the internal amplifier. |
|
|
|
