INSTRUCTION STRINGS ACCESSORIES MUSIC LINKS
 Visit Our Catalog at SteelGuitarShopper.com for Steel Guitars, Strings, Instruction, Music and Accessories 
Forum Index
where steel players meet online
The Steel Guitar Forum

Post new topic Pair of Bill Lawrence 705's Widemount $85 Shipped CONUS
Reply to topic
Author Topic:  Pair of Bill Lawrence 705's Widemount $85 Shipped CONUS
Jack Stanton


From:
Somewhere in the swamps of Jersey
Post Posted 18 Apr 2017 5:21 pm     Reply with quote

These are the reissue Lawrence pickups. I was trying to put them in my Push Pull and had a problem getting them low enough, so I had some of the mounting plate material professionally milled off, as per Jim Palenscar.

Jim wrote in a recent thread:
It was a bit of a conundrum as we were trying to install a late model 705 into John's pushpull and I had only about .100" (a small 1/8") clearance between the pickup and the strings- too little clearance. The 705's were about .200" taller than the original single coil Emmons pickups. After unsuccessfully trying to remove the bottom plate of the pickup(removing the 2 screws did not free it from the bobbins) and slotting the Emmons pickup mounting plate to allow for the pickup cable I realized that the legs of the pillow blocks were the problem and that the bobbins were wider than the distance between the pillow blocks. I thought that if I were able to remove the portion of the base plates that extended over the pillow blocks it would allow for enough clearance so I put the pickups in the milling machine and took about 90% of the plastic material off of the ends of the base plates. I also swapped the aluminum spacers out under the pickup with rubber O rings as well as replaced the pickup mounting screws with shorter ones and that gave me enough clearance to be confident that it would be enough.

    
After all that I found I was a single coil type of guy. The milled material in no way effects the sound or integrity in any way. The leads were short when I got them, so I extended them.






[url][/url][url][/url][url][/url][url][/url][url][/url][url][/url][url][/url][url][/url][url][/url][url][/url]
View user's profile Send private message Send e-mail
Arvis Moore


From:
Mississippi, USA
Post Posted 12 Jul 2017 5:29 am     Reply with quote

I sent you a PM
View user's profile Send private message Send e-mail

All times are GMT - 8 Hours
Jump to:  

Our Online Catalog
Strings, CDs, instruction,
steel guitars & accessories

www.SteelGuitarShopper.com

Steel Guitar Music
Instrumental steel guitar CDs for your permanent collection
www.SteelGuitarMusic.com

Please review our Forum Rules and Policies

The Steel Guitar Forum
148 South Cloverdale Blvd.
Cloverdale, CA 95425 USA

Support This Forum


BIAB Styles
Ray Price Shuffles for Band-in-a-Box
by Jim Baron
HTTP