INSTRUCTION STRINGS ACCESSORIES MUSIC LINKS
 Visit Our Catalog at SteelGuitarShopper.com for Steel Guitars, Strings, Instruction, Music and Accessories 
Forum Index
where steel players meet online
The Steel Guitar Forum

Post new topic How about a real Stringmaster, T8 almost perfect condition!?
Reply to topic
Author Topic:  How about a real Stringmaster, T8 almost perfect condition!?
Ron Ellison


From:
D.C.
Post Posted 11 Mar 2017 3:51 pm     Reply with quote

Pretty much museum quality. I'm planning on turning this into a left handed oriented guitar..it's almost too nice for that.....
This is what a T8 26" long scale looks like after resting in it's case for 60 years!
Still has it's original rubber feet!










Chrome is practically perfect! Man, even I'm questioning if I should take it apart!
View user's profile Send private message Send e-mail
Tim Heidner


From:
Port Arthur, TX
Post Posted 11 Mar 2017 6:35 pm     Reply with quote

Lawd a Mighty! Whoa!
View user's profile Send private message
Bill Creller


From:
Saginaw, Michigan, USA
Post Posted 11 Mar 2017 7:08 pm     Reply with quote

Beautiful !! Very Happy
View user's profile Send private message Send e-mail
Tommy Johnson


From:
Iowa, USA
Post Posted 11 Mar 2017 9:09 pm     Re: How about a real Stringmaster, T8 almost perfect conditi Reply with quote

Ron Ellison wrote:
Pretty much museum quality. I'm planning on turning this into a left handed oriented guitar..it's almost too nice for that.....
This is what a T8 26" long scale looks like after resting in it's case for 60 years!
Still has it's original rubber feet!










Chrome is practically perfect! Man, even I'm questioning if I should take it apart!
Quote:
Quote:
View user's profile Send private message Send e-mail
Jeff Mead


From:
London, England
Post Posted 12 Mar 2017 3:49 am     Reply with quote

Haven't seen many in that condition.

I would never modify something like that. There are plenty of refinished/rebuilt/beaten up guitars around ripe for modifications. Of course, it's your guitar and you can do what you want with it but if you have any interest in resale value, I'd advise leaving it alone.

You will find that the inside surface of the necks (which will now be exposed front and back) don't look good so you would either have to consider a partial refinish (which would be hard to match with the rest of the guitar) or a total refnish which would halve its value.

If you don't mind how it looks with the exposed unfinished bits, then you might as well get a beaten up guitar. You'll also have to drill a couple of extra holes in it. Just wouldn't make sense to me.
View user's profile Send private message Send e-mail
Ron Ellison


From:
D.C.
Post Posted 12 Mar 2017 5:17 am     Reply with quote

You ain't the only one telling me that!
It's not my fault the guitar was better than expected....😀
I figured for the price, it would be cool to do the lefty switcheroo.
Not glued to it, I might go ahead and pass it on to someone who really wants it.
I now live real close to the best lap steel mechanic, it could be changed without problems.
I'm no pro, far from it, so not sure what to do. Just put up the pics to counterattack that veggie spinner!
View user's profile Send private message Send e-mail
George Piburn


From:
The Oklahoma Hills, USA
Post Posted 12 Mar 2017 7:26 am     KingPin Reply with quote

KingPin Guitars by Gary Rue can make you a new left play for reasonable.

Cool
_________________
GeorgeBoards S8 Non Pedal Steel Guitar Instruments
Maker of One of a Kind Works of Art that play music too.
Instructional DVDs
YouTube Channel
View user's profile Send private message Send e-mail Visit poster's website
Patrick Ickes


From:
Upper Lake, CA USA
Post Posted 12 Mar 2017 9:11 am     Sell yours, Buy Mine Reply with quote

Hi Ron,
I have a 55 T-8 Stringmaster that is already partially disassembled and parts bagged. The necks are still bolted together. I was going to refinish, but have since lost interest.
If interested, I could dig it out and send some pics.
Patrick
View user's profile Send private message Send e-mail
Ian McLatchie


From:
Sechelt, British Columbia
Post Posted 12 Mar 2017 2:15 pm     Reply with quote

Quote:
I'm planning on turning this into a left handed oriented guitar


Converting a Stringmaster to left-handed involves reversing the nuts, adjusting the bridge and pickup height - that's it. I mean, you could rewire it so the bridge plate with the volume and tone pots is on the inner neck, but what's the point? Lovely guitar. It deserves to be kept in original condition if possible.
View user's profile Send private message
Jeff Mead


From:
London, England
Post Posted 12 Mar 2017 2:52 pm     Reply with quote

Ian McLatchie wrote:
Quote:
I'm planning on turning this into a left handed oriented guitar


Converting a Stringmaster to left-handed involves reversing the nuts, adjusting the bridge and pickup height - that's it. I mean, you could rewire it so the bridge plate with the volume and tone pots is on the inner neck, but what's the point?


There's more to it than that if you want to do it properly. Because the necks are stepped in height, simply turning it around so the front faces the player makes the furthest neck really hard to play as it is a lot lower than the (now) nearest one.

I assumed he was planning to do a full conversion which would involve unbolting the necks and reversing each one so the step was the correct way round. This would mean that the front of the front neck would now be up against the middle neck and would need a hole drilled through it for the wiring. Also the holes between the other necks for the wiring would probably no longer line up and need to be drilled. The back neck, nearest the player would now have the jack socket hole against the middle neck, so a new one would need to be drilled in the side facing the player. The new outside faces would not be finished properly and would look pretty rough necessitating a full or partial refinish.
View user's profile Send private message Send e-mail
Ron Ellison


From:
D.C.
Post Posted 12 Mar 2017 2:56 pm     Reply with quote

I just PM'd him that Very Happy
View user's profile Send private message Send e-mail
Ian McLatchie


From:
Sechelt, British Columbia
Post Posted 12 Mar 2017 4:25 pm     Reply with quote

You're right, Jeff, the difference in body thickness on a triple neck would be problematic if it were played left-handed. I experimented with my Deluxe 8 and found that, even though having the outer neck on a lower tier than the inner one is obviously not desirable, it's still quite playable that way. A third neck would be way more troublesome, although as someone who plays Spanish guitar left-handed I know there's a great deal one can adapt to. Butchering a guitar as beautiful as this one would be a shame. Better to sell it and pick up one with more road wear. The difference in price would almost pay for the conversion, I expect.
View user's profile Send private message
Mark Addeo


From:
New Jersey, USA
Post Posted 14 Mar 2017 6:42 am     Reply with quote

that's a beaut but even as a lefty I couldn't bring myself to do it. Especially one from the early 50's. My love of all things Fender wouldn't let me. I bought an abused D8 stringmaster for that purpose figuring I was doing more good than harm. Winking But good luck whatever you decide. She's yours!
View user's profile Send private message Send e-mail
Allen Hutchison


From:
Kilcoy, Qld, Australia
Post Posted 14 Mar 2017 1:46 pm     Please don't Reply with quote

Man, that's too nice!
As a bit of a collector & a lefty, I would salt that away in a dust proof glass case & maybe? let a righty play it rarely! Mr. Green
You gotta ask yourself, "when will I ever see another one this good"
PS. If it's ever for sale - I'm interested!
View user's profile Send private message Send e-mail

All times are GMT - 8 Hours
Jump to:  

Our Online Catalog
Strings, CDs, instruction,
steel guitars & accessories

www.SteelGuitarShopper.com

Steel Guitar Music
Instrumental steel guitar CDs for your permanent collection
www.SteelGuitarMusic.com

Please review our Forum Rules and Policies

The Steel Guitar Forum
148 South Cloverdale Blvd.
Cloverdale, CA 95425 USA

Support This Forum


BIAB Styles
Ray Price Shuffles for Band-in-a-Box
by Jim Baron
HTTP