| Author |
Topic: Does anybody know? Fender tuners and pans... |
Dan Campbell
From:
Florida, USA
|
Posted 11 Feb 2017 5:46 am |
|
Does anybody know the exact size of the pocket Fender bores out in order to insert their pans and tuners? Height, depth, width??? Dan
Last edited by Dan Campbell on 11 Feb 2017 11:23 am; edited 1 time in total |
|
|
|
Dan Campbell
From:
Florida, USA
|
Posted 11 Feb 2017 9:12 am Without taking it off
|
|
| Can anyone tell me the vertical and horizontal measurements on your Fender -- even if you don't know the depth. Absolute numbers are not important right now. Thanks Dan |
|
|
|
Tommy Adams
From:
Florida, USA
|
Posted 24 Feb 2017 5:26 pm
|
|
| Hi Dan, I measured the cavity in my stringmaster and it measured 2 7/8" on the small end, and 3 1/4" on the wide end next to the tuning nut. The cavity was 3/4" deep on the small end, and 1" deep next to the tuning nut. The cavity hole was 4 1/8" long. Hope this helps. Tommy |
|
|
|
John Rosett
From:
Missoula, MT
|
Posted 24 Feb 2017 8:30 pm
|
|
The 1951 T-8 I have measures 3 7/8" long, and 2 1/2" wide. The depth varies from 1" at the nut end to 3/4" at the end. I recently took the tuner pans off and put them on an earlier body, and had to remove some wood to make them fit.
_________________
"it's not in bad taste, if it's funny." - john waters |
|
|
|
Dan Campbell
From:
Florida, USA
|
Posted 26 Feb 2017 6:07 pm Thanks for the info
|
|
| Thanks for your help guys! |
|
|
|
