| Author |
Topic: Leg clamps? |
Tom Wolverton
From:
Carpinteria, CA
|
Posted 2 Jan 2017 7:20 pm |
|
Does anyone know where a person can purchase a leg clamp that can be mounted to the side or rear face of an effects pedal? Like what is on the Freeloader (for example):
_________________
To write with a broken pencil is pointless. |
|
|
|
Ron Funk
From:
Ballwin, Missouri
|
Posted 2 Jan 2017 8:12 pm
|
|
| Show Pro |
|
|
|
Tom Wolverton
From:
Carpinteria, CA
|
Posted 2 Jan 2017 8:33 pm Thanks
|
|
OK, I was being lazy. Sorry everybody. There's plenty of sources for these leg clamps, including right here at the SGF store. Order going in.
_________________
To write with a broken pencil is pointless. |
|
|
|
Bill L. Wilson
From:
Oklahoma, USA
|
Posted 3 Jan 2017 12:24 am The Do it Yourself Answer.
|
|
| I make mine out of PVC pipe, cut off in 1 1/2" or 2" sections, then grind a section of it into a C-clamp shape. Use small machine screws and nuts to install it on the unit and clamp it on my steel leg. The PVC is much thicker and holds up better than those thin clamps most pedal companies use. And I use the more flexible gray PVC, as the white is fairly brittle. |
|
|
|
