Author |
Topic: Fouke Industrial Lap Steel |
Eric Gearhart
From: Bellingham, Massachusetts, USA
|
Posted 7 Oct 2015 6:20 am
|
|
This is the Fouke Alumigliss prototype. No case $600 shipped.
Last edited by Eric Gearhart on 7 Oct 2015 5:01 pm; edited 1 time in total |
|
|
|
Will Cowell
From: Cambridgeshire, UK
|
Posted 7 Oct 2015 6:23 am
|
|
No link here, Eric. _________________ Williams 700 series keyless U12,
Sierra keyless U14, Eezzee-Slide & BJS bars
Moth-eaten old Marshall 150 combo
Roland Cube 80XL, Peterson Strobo+HD,
EarthQuaker Despatch Master for reverb / delay |
|
|
|
Eric Gearhart
From: Bellingham, Massachusetts, USA
|
Posted 7 Oct 2015 6:31 am steel
|
|
Played at an open mic and a couple of recording sessions with it. Great sounding axe....
Last edited by Eric Gearhart on 7 Oct 2015 5:11 pm; edited 1 time in total |
|
|
|
Eric Gearhart
From: Bellingham, Massachusetts, USA
|
Posted 7 Oct 2015 6:37 am steel
|
|
Currently in open G tuning.
Last edited by Eric Gearhart on 7 Oct 2015 5:13 pm; edited 1 time in total |
|
|
|
Danny Bates
From: Fresno, CA. USA
|
Posted 7 Oct 2015 10:11 am I hope this helps
|
|
I just finished up a first Prototype 6 string AlumiGliss Lap Steel, based on the excellent design & input of Artist/Endorser Myk Freedman (mykfreedman.com).
This version has a 24" scale length, Armstrong M213K humbucker, Lefty/Righty control layout, narrow 3" neck with full width fretboard, parallel string spacing at bridge/nut, set to 3/8" on center.
This is a heavy gauge plate model with a more traditional guitar shape body, sandwiched over a modified Dan Walsh fry pan shaped tube core.
I left the PRO mods off this one, and although you give up a bit of sustain up the neck, the acoustic tone really comes through. Lots of "Honk".
Currently I have it strung with 16-56 strings, and tuned in open E. It has the same V-notched bridge and nut arrangement, so other gauges/tunings or left handed conversion is easy.
I also used the lower, more slippery brass nut I install on my Mini-REZ's. As with all my prototypes, I never keep them, so will put this one is up for sale!
Specifications:
===================
24" scale
Kent Armstrong M213K humbucker
parallel string spacing @ 3/8" on center
6 string 16-56 strings, open E tuning currently
Grover Rotomatic 102c tuners
Chrome dome knobs
1 volume and 1 tone control
approximate weight = 8lbs
approximate dimensions = 33 1/2" L x 9" @ widest point (lower bout)
*USA made gig bag included
This steel plays and sounds excellent!
International shipment by Priority Mail International Express @ $100.00 USD flat fee. All customs forms marked as "merchandise", no exceptions. Customs fees or duties are the buyer's responsibility to know about in their country.
|
|
|
|
Eric Gearhart
From: Bellingham, Massachusetts, USA
|
Posted 7 Oct 2015 10:18 am steel
|
|
Many thanks Danny! |
|
|
|
Eric Gearhart
From: Bellingham, Massachusetts, USA
|
Posted 15 Oct 2015 3:50 pm gliss
|
|
Bump |
|
|
|