The Steel Guitar Forum Store 

Post new topic 1973 Sho-Bud model 6140 Project
Reply to topic
Author Topic:  1973 Sho-Bud model 6140 Project
George Ashmore


From:
Spearfish, South Dakota, USA
Post  Posted 16 Jun 2013 1:07 pm    
Reply with quote

The project is a 1973 Sho-Bud model 6140. My Oldest Friend Carl Marlar wrote the following:
I paid $300.00 in nonworking condition. The modifications made to the guitar over the years were not done well or with care. Now that I am retired, I repair guitars and other string instruments for a local music store in Plainview, Texas. Although I had never tried to restore a pedal steel guitar, I thought the Sho-Bud 6140 would make a good C6 single neck. The finish on the guitar was cracked all over and missing in several places, as well as extra holes drilled in the wood and metal. After taking every thing apart, I polished all the aluminum and painted the steel parts with aluminum paint. I took apart the changer and cleaned and polished the cams and all the moving parts. I took the wooden neck off the deck and striped the old finish off everything. After a new decal and clear finish was applied I replaced the original finger-board with a new one with a mate finish. After adjusting for intonation, I left the finger-board longer to cover the extra holes that had been drilled in the neck which I had already filled. There were large holes in the one of the end plates that were going to cost over $120.00 to weld closed with no promise of matching the rest of the aluminum. So I had two custom engraved plates made showing what the year, model and brand was. Also who restored it just to cover the small holes on the other side end plate. The wood they used in these guitars is amazing to see! I love the sound and history behind these great American made guitars. My goal was not only to have a classic C6 Sho-Bud to go with my Mullen B9, but to bring something back to life and be enjoyed by others long after I am gone.

[/img]
[img][/img]

[img]

[/img]

_________________
Life in Texas was a blast!
MSA Millennium
View user's profile Send private message Send e-mail

George Ashmore


From:
Spearfish, South Dakota, USA
Post  Posted 16 Jun 2013 1:22 pm     Before and After
Reply with quote

I also have some before pictures to include here.
[img]

[/img]

[img]

[/img]


And The End-plate Placards
[img]

[/img]

_________________
Life in Texas was a blast!
MSA Millennium
View user's profile Send private message Send e-mail

Jay Fagerlie


From:
Lotus, California, USA
Post  Posted 17 Jun 2013 5:37 am    
Reply with quote

Good job George!
It looks like my 73 C6 'Bud.


View user's profile Send private message Send e-mail Visit poster's website

George Ashmore


From:
Spearfish, South Dakota, USA
Post  Posted 17 Jun 2013 7:46 am     Thanks Jay - Carl's Story
Reply with quote

Hello Jay.
Carl Marlar is the Luthier in Plainview Texas who purchased and rebuilt this guitar.
He is in the process of signing-up for the SGF via Mail.
I told him that I would post his project to show him how many fine folks were here.
I am sure he will be pleased with any comments or suggestions.
He is brand new to Steel and appreciates the guidance and any direction.
Until he is a member I will pass along his replies.
Thanks:
_________________
Life in Texas was a blast!
MSA Millennium
View user's profile Send private message Send e-mail

George Ashmore


From:
Spearfish, South Dakota, USA
Post  Posted 17 Jun 2013 7:49 am     Jay's Guitar
Reply with quote

Jay:
That's one fine looking guitar.
I bet you're proud of that one!
_________________
Life in Texas was a blast!
MSA Millennium
View user's profile Send private message Send e-mail

Jay Fagerlie


From:
Lotus, California, USA
Post  Posted 17 Jun 2013 8:44 am    
Reply with quote

I am real happy with it!
I bought it here on the forum, and I feel real fortunate to be the steward for the time being of this fine instrument.

Here's the story on it:
http://bb.steelguitarforum.com/viewtopic.php?t=193727&start=0&postdays=0&postorder=asc&highlight=shobud
View user's profile Send private message Send e-mail Visit poster's website

Gary Patterson


From:
Gallatin, TN
Post  Posted 17 Jun 2013 1:30 pm    
Reply with quote

Nice touch with the engraved restoration nameplate.
View user's profile Send private message Send e-mail

John Roche


From:
England
Post  Posted 17 Jun 2013 1:44 pm    
Reply with quote

I too am doing up a 6140, got two knees on and should have the other two on this week. Amazing sounding guitars.beautiful birdseye maple. They are sleepers.
http://bb.steelguitarforum.com/viewtopic.php?t=246895&start=25
View user's profile Send private message Send e-mail

Niels Andrews


From:
Salinas, California, USA
Post  Posted 17 Jun 2013 2:09 pm    
Reply with quote

The birds eye maple on this guitar is incredible. It seems a lot of the Shobud's had some real nice wood cabinets.
_________________
Die with Memories. Not Dreams.
Good Stuff like Zum S-12, Wolfe Resoport
MSA SS-12, Telonics Combo.
View user's profile Send private message Send e-mail

Richard Sinkler


From:
aka: Rusty Strings -- Missoula, Montana
Post  Posted 17 Jun 2013 6:13 pm    
Reply with quote

Great job. I can't imagine what would prompt someone to ruin a guitar like they did. Luckily it landed in the hands of someone who cares.
_________________
Carter D10 8p/8k, Dekley S10 3p/4k C6 setup,Regal RD40 Dobro, NV400, NV112 . Playing for 54 years and still counting.
View user's profile Send private message Send e-mail


All times are GMT - 8 Hours
Jump to:  

Our Online Catalog
Strings, CDs, instruction,
steel guitars & accessories

www.SteelGuitarShopper.com

Please review our Forum Rules and Policies

Steel Guitar Forum LLC
PO Box 237
Mount Horeb, WI 53572 USA


Click Here to Send a Donation

Email admin@steelguitarforum.com for technical support.


BIAB Styles
Ray Price Shuffles for
Band-in-a-Box

by Jim Baron
HTTP