The Steel Guitar Forum Store 

Post new topic Strings ball ends. Hooks Vs Pins.
Reply to topic
Author Topic:  Strings ball ends. Hooks Vs Pins.
Jason Lynch


From:
Essex, United Kingdom
Post  Posted 24 Jan 2015 3:23 pm    
Reply with quote

Hi all
I've been doing a little window shopping lately, (Dreaming!) and looking at new guitars.
I've noticed the amount of manufacturers that use pins to secure the string to the finger, rather than a hook for the ball end to fit into.
Personally, I can't imagine anything worse than messing around with a load of pins every time you change strings-sounds like a recipe for disaster to me! I've only had two guitars, and they both had hooks in the finger.
Is there an advantage to these pins That I can't see?
Sho-pro, Rittenberry, Rains, Justice, Fessenden all use pins.
View user's profile Send private message Send e-mail

Jack Stoner


From:
Kansas City, MO
Post  Posted 24 Jan 2015 3:32 pm    
Reply with quote

My Franklin uses pins. The PP Emmons I had, used pins.

There are some that believe pins have better tone and sustain.
_________________
GFI Ultra Keyless S-10 with pad (Black of course) TB202 amp, Hilton VP, Steelers Choice sidekick seat, SIT Strings
Cakewalk by Bandlab and Studio One V4.6 pro DAWs, MOTU Ultralite MK5 recording interface unit
View user's profile Send private message Send e-mail

Jason Lynch


From:
Essex, United Kingdom
Post  Posted 24 Jan 2015 3:34 pm    
Reply with quote

Ok, thanks jack.
View user's profile Send private message Send e-mail

Dale Rottacker


From:
Walla Walla Washington, USA
Post  Posted 24 Jan 2015 3:49 pm    
Reply with quote

Jason...I’ve got both, but it’s my Sho~Bud Pro lll that has the hooks, and I’d say, I personally have had more issues with them than the pins on the two Mullens I’ve had...For instance, not being able to get a fat 10th string back in the hook on the C6th neck...And I play that neck, VERY little...it just popped out one day, and seems a little undersized to get the ball up in there far enough so it won’t pop out.
_________________
Dale Rottacker, Steelinatune™
*2021 MSA Legend, "Jolly Rancher" D10 10x9
*2021 Rittenberry, "The Concord" D10 9x9
*1977 Blue Sho-Bud Pro 3 Custom 8x6
https://msapedalsteels.com
http://rittenberrysteelguitars.com
https://www.telonics.com/index.php
https://www.p2pamps.com
https://www.quilterlabs.com
View user's profile Send private message Send e-mail Visit poster's website

Jason Lynch


From:
Essex, United Kingdom
Post  Posted 24 Jan 2015 3:51 pm    
Reply with quote

Thanks Dale. Seems strange to imagine a string under tensions just "popping out" from it's hook.
And thanks. I thought Mullen had hooks!
View user's profile Send private message Send e-mail

Dale Rottacker


From:
Walla Walla Washington, USA
Post  Posted 24 Jan 2015 5:11 pm    
Reply with quote

Jason Lynch wrote:
Thanks Dale. Seems strange to imagine a string under tensions just "popping out" from it's hook.
And thanks. I thought Mullen had hooks!


I might be confused Jason...My Sho~Bud has “slots”, I assumed thats what you referred to as hooks as I’ve always called what’s on my Mullen “Pins”...these are off my Mullen...sorry if I was confused...Confused


_________________
Dale Rottacker, Steelinatune™
*2021 MSA Legend, "Jolly Rancher" D10 10x9
*2021 Rittenberry, "The Concord" D10 9x9
*1977 Blue Sho-Bud Pro 3 Custom 8x6
https://msapedalsteels.com
http://rittenberrysteelguitars.com
https://www.telonics.com/index.php
https://www.p2pamps.com
https://www.quilterlabs.com
View user's profile Send private message Send e-mail Visit poster's website

Jason Lynch


From:
Essex, United Kingdom
Post  Posted 25 Jan 2015 12:17 am    
Reply with quote

Yeah, that's what I meant by pins, Dale. Thanks.
View user's profile Send private message Send e-mail

Johan Jansen


From:
Europe
Post  Posted 25 Jan 2015 12:36 am    
Reply with quote

I think it all has to do with the overall instruction of your pedalsteel. I decided to go with my WBS for a brass tunnel- or bridge-changer. I made (to me) the right decicion for sound and sustain inhere. Easy to change strings. Also, never a pin that falls down in the changer and almost no stringbreakage. JJ

[/img]
View user's profile Send private message Send e-mail Visit poster's website

Bob Carlucci

 

From:
Candor, New York, USA
Post  Posted 25 Jan 2015 5:18 am    
Reply with quote

Johan.. Wow, what a great design for a pedal steel bridge! The few WBS steels I have seen pics of, have really impressed me.. They look as well built and innovative as any steel guitar built here in the states...
I have been on their website, and the odd translation is a hoot.. You can see the somewhat broken English in print.
The WBS guitars like super precision machines... The Germans have always built really good stuff.
bob
_________________
I'm over the hill and hittin'rocks on the way down!

no gear list for me.. you don't have the time......
View user's profile Send private message

Donny Hinson

 

From:
Glen Burnie, Md. U.S.A.
Post  Posted 25 Jan 2015 6:32 am    
Reply with quote

Guitars with pins could be a problem, especially if you only have one guitar. A pin snapping off or coming loose, while it's a very rare occurence, could put you out of business until it's repaired.

If I gigged regularly with a guitar like that, it'd have to have two rows of pins. In case one broke, you'd have the "backup" already there.
View user's profile Send private message Send e-mail

Erv Niehaus


From:
Litchfield, MN, USA
Post  Posted 25 Jan 2015 6:49 am    
Reply with quote

Williams has a slanted design on their changer fingers, with a slot to fit the string end into. With this design, when a string breaks the end doesn't wind up in the changer.
View user's profile Send private message Send e-mail

Ian Rae


From:
Redditch, England
Post  Posted 25 Jan 2015 7:01 am    
Reply with quote

Donny, that's a great idea and easy to do but I can't imagine any manufacturer taking it up and so drawing attention to the possibility of failure. It would have to be a retro-fit, like the emergency second brake pedal on your car.
_________________
Make sleeping dogs tell the truth!
Homebuilt keyless U12 7x5, Excel keyless U12 8x8, Williams keyless U12 7x8, Telonics rack and 15" cabs
View user's profile Send private message Send e-mail Visit poster's website

chris ivey


From:
california (deceased)
Post  Posted 25 Jan 2015 9:23 am    
Reply with quote

how did we ever get by with pins for over 50 years?
View user's profile Send private message

Jason Lynch


From:
Essex, United Kingdom
Post  Posted 25 Jan 2015 9:25 am    
Reply with quote

Do i detect a touch of cynicism there, Mr Ivey Laughing
Good point though.
View user's profile Send private message Send e-mail

Donny Hinson

 

From:
Glen Burnie, Md. U.S.A.
Post  Posted 26 Jan 2015 3:28 am    
Reply with quote

chris ivey wrote:
how did we ever get by with pins for over 50 years?


Answer: Some of us felt that guitars that used pins were a poor design, so we just avoided guitars that had them. Laughing
View user's profile Send private message Send e-mail

Jason Lynch


From:
Essex, United Kingdom
Post  Posted 26 Jan 2015 3:31 am    
Reply with quote

I asked
Jeff Surat, from Sho Pro this question through Facebook, and his answer was that Pins are just more convenient. I suppose from a manufacturing point of view that are, but I'm with Donny on this one.
View user's profile Send private message Send e-mail

Howard Steinberg


From:
St. Petersburg, Florida , USA
Post  Posted 26 Jan 2015 5:00 am    
Reply with quote

Fred Justice has or had a piano tuning tool which is a rubber wedge with a handle that holds a string on the pin. This makes string changing faster and painless. Kinda like the third arm/hand that I used to wish for when changing a string.
_________________
Justice Pro Lite (4-5), Justice D-10 (8-5)x2 , Quilter Steelaire, Hilton Pedal, BJ's bar.
View user's profile Send private message Send e-mail

John De Maille


From:
On a Mountain in Upstate Halcottsville, N.Y.
Post  Posted 26 Jan 2015 7:42 am    
Reply with quote

I played my RusLer, that, has pins for 28 yrs and never broke a pin, strings yes, but, no pins. I never even thought about a pin breaking, so, I guess I didn't jinx myself or my steel.
View user's profile Send private message Send e-mail

Jason Lynch


From:
Essex, United Kingdom
Post  Posted 26 Jan 2015 7:47 am    
Reply with quote

Fair point, John. Thanks.
View user's profile Send private message Send e-mail

Ian Rae


From:
Redditch, England
Post  Posted 26 Jan 2015 10:05 am    
Reply with quote

Speaking as one who has built a guitar with pins (yes, it is simpler) and is unlikely ever to own one with slots, I have to side with simplicity. As long as the ball end is snugly down on the base of the pin there is no reason for it to fail other than a defect in the wire from which it's cut (I used 1/16" stainless steel). If you're worried about that you should also worry about pedals snapping off &c. &c. I'm sure I read a post one time where a ball end was jammed in a slot....
_________________
Make sleeping dogs tell the truth!
Homebuilt keyless U12 7x5, Excel keyless U12 8x8, Williams keyless U12 7x8, Telonics rack and 15" cabs
View user's profile Send private message Send e-mail Visit poster's website

Jason Lynch


From:
Essex, United Kingdom
Post  Posted 26 Jan 2015 10:53 am    
Reply with quote

Thanks Ian. I appreciate that perhaps they're moe reliable than I give them credit for.
Cheers
View user's profile Send private message Send e-mail

Tony Glassman


From:
The Great Northwest
Post  Posted 26 Jan 2015 5:24 pm    
Reply with quote

I've broken only one pin in 40 years of steel guitar playing. It was my fault, I didn't check to make sure the string was snuggled up against the changer head before I tightened it up.

Was able to drill a second hole right above the sheared-off pin and tap in a roll-pin. I played it for that way for about three or four years until I replaced it while rebuilding the guitar
View user's profile Send private message

Darvin Willhoite


From:
Roxton, Tx. USA
Post  Posted 26 Jan 2015 7:33 pm    
Reply with quote

I never broke a pin on a pin style, those roll pins are pretty strong, they're made of spring steel, and commonly called spring pins.

The new MSA's have a slot and a pocket that catches the end of the string if you should ever break one, then you just lift it out. I only remember breaking one string on all three of mine. Great design.
_________________
Darvin Willhoite
MSA Millennium, Legend, and Studio Pro, Reese's restored Universal Direction guitar, as well as some older MSAs, several amps, new and old, and a Kemper Powerhead that I am really liking. Recently added a Zum D10, a Mullen RP, and a restored blue Rose, named the "Blue Bird" to the herd. Also, I have acquired and restored the plexiglass D10 MSA Classic again that was built as a demo in the early '70s. I also added a '74 lacquer P/P, with wood necks.
View user's profile Send private message Send e-mail

John Billings


From:
Ohio, USA
Post  Posted 27 Jan 2015 10:14 am    
Reply with quote

Never broken a pin, but have had to use a tiny file to widen slots because the 10th string wrap wouldn't let the string seat correctly. PITA!
View user's profile Send private message Send e-mail


All times are GMT - 8 Hours
Jump to:  

Our Online Catalog
Strings, CDs, instruction,
steel guitars & accessories

www.SteelGuitarShopper.com

Please review our Forum Rules and Policies

Steel Guitar Forum LLC
PO Box 237
Mount Horeb, WI 53572 USA


Click Here to Send a Donation

Email admin@steelguitarforum.com for technical support.


BIAB Styles
Ray Price Shuffles for
Band-in-a-Box

by Jim Baron
HTTP